ABSTRACT
Alkaline water electrolysis (AWE) is a mature water electrolysis technology that can produce green hydrogen most economically. This is mainly attributed to the use of Ni-based materials that are easy to process and inexpensive. The nickel-based meshes with various structures such as woven mesh and expanded mesh are widely used as electrode in the AWE due to its common availability and easy fabrication. However, the morphological effect of meshes on hydrogen evolution reaction (HER) performance has not been studied. Here a new parameter to determine the structural effect of mesh on HER performance was first proposed. The key factors of the parameter were found to be the strand width, pore width and the strand surface area. The woven mesh with the ratio of pore width to strand width that converges to 1 showed the lowest the overpotential. The expanded mesh with the higher the structural surface area exhibited the lowest the overpotential. This study will help to choose an optimal structure for the mesh with the HER electrode.
ABSTRACT
In this study, we report synthesis and growth of rutile-anatase TiO2 thin film on fluorine-doped tin oxide (FTO) glass by a two-step hydrothermal method. The effects of additional treatments (i.e., TiCl4 post-treatment and seed layer formation were also studied. Photocurrent-voltage (I-V) measurement of rutile-anatase TiO2 thin film was performed under 1.5 G light illumination. Photovoltaic performance was investigated by incident photon-to-electron conversion efficiency (IPCE), electrochemical impedance spectroscopy (EIS), intensity-modulated photocurrent/photovoltage spectroscopy (IMVS/IMPS) and open-circuit photovoltage decay (OCVD).
ABSTRACT
A simple and reliable method based on thermogravimetric analysis has been developed for determining triacylglycerol content in Chlorella sp. KR-1. There are two decomposing steps during pyrolysis of the microalgal cells and the second step of weight loss may be attributed to degradation and volatilization of triacylglycerols. The second peak height in the temperature derivatives of weight loss increased with the triacylglycerol content of the microalgal cells and the peak was around 390 °C regardless of the triacylglycerol contents. Based on these findings, a linear equation for determining triacylglycerol content was derived. The proposed method gives satisfactory results, showing small variance and a good interpolation capability.
Subject(s)
Chlorella/chemistry , Thermogravimetry/methods , Triglycerides/analysisABSTRACT
Aqueous ammonia absorbent (10 wt %) was modified with four kinds of additives (1 wt %) including amine and hydroxyl groups, i.e., 2-amino-2-methyl-1-propanol (AMP), 2-amino-2-methyl-1,3-propandiol (AMPD), 2-amino-2-ethyl-1,3-propandiol (AEPD), and tri(hydroxymethyl) aminomethane (THAM), for CO(2) capture. The loss of ammonia by vaporization was reduced by additives, whereas the removal efficiency of CO(2) was slightly improved. These results were attributed to the interactions between ammonia and additives or absorbents and CO(2) via hydrogen bonding, as verified by FT-IR spectra and computational calculation. Molecular structures as well as binding energies were obtained from the geometries of (ammonia + additives) and (ammonia + additives + CO(2)) at the optimized state. These experimental and theoretical findings demonstrate that additives including amine and hydroxyl group are suitable for modifying aqueous ammonia absorbent for CO(2) removal.
