A carbon nanotube metamaterial sensor showing slow light properties based on double plasmon-induced transparency.

In this study, we proposed a bifunctional sensor of high sensitivity and slow light based on carbon nanotubes (CNTs). An array of left semicircular ring (LSR), right semicircular ring (RSR), and circular ring (CR) resonators are utilized to form the proposed metamaterial. The proposed structure can achieve double plasmon-induced transparency (PIT) effects under the excitation of a TM-polarization wave. The double PIT originated from the destructive interference between two bright modes and a dark mode. A coupled harmonic oscillator model is used to describe the destructive interference between the two bright modes and a dark mode, and the simulation results agree well with the calculated results. Moreover, we investigate the influence of the coupling distance, period, and flare angle on the PIT spectra. The relationship between the resonant frequencies, full width at half maximum (FWHM), amplitudes, quality factors (Q), and the coupling distance is also studied. Finally, a high sensitivity of 1.02 THz RIU-1 is obtained, and the transmission performance can be maintained at a good level when the incident angle is less than 40°. Thus, the sensor can cope with situations where electromagnetic waves are not perpendicular to the structure's surface. The maximum figure of merit (FOM) can reach about 8.26 RIU-1; to verify the slow light property of the device, the slow light performance of the proposed structure is investigated, and a maximum time delay (TD) of 22.26 ps is obtained. The proposed CNT-based metamaterial can be used in electromagnetically induced transparency applications, such as sensors, optical memory devices, and flexible terahertz functional devices.

Dynamically tunable multi-band plasmon-induced absorption based on multi-layer borophene ribbon gratings.

In this paper, we propose a borophene-based grating structure (BBGS) to realize multi-band plasmon-induced absorption. The coupling of two resonance modes excited by upper borophene grating (UBG) and lower borophene grating (LBG) leads to plasmon-induced absorption. The coupled-mode theory (CMT) is utilized to fit the absorption spectrum. The simulated spectrum fits well with the calculated result. We found the absorption peaks exhibit a blue shift with an increase in the carrier density of borophene grating. Further, as the coupling distance D increases, the first absorption peak shows a blue shift, while the second absorption peak exhibits a red shift, leading to a smaller reflection window. Moreover, the enhancement absorption effect caused by the bottom PEC layer is also analyzed. On this basis, using a three-layer borophene grating structure, we designed a three-band perfect absorber with intensities of 99.83%, 99.45%, and 99.96% in the near-infrared region. The effect of polarization angle and relaxation time on the absorption spectra is studied in detail. Although several plasmon-induced absorption based on two-dimensional (2D) materials, such as graphene, black phosphorus, and transition metal dichalcogenides (TMDs), have been previously reported, this paper proposes a borophene-based metamaterial to achieve plasmon-induced perfect absorption since borophene has some advantages such as high surface-to-volume ratios, mechanical compliance, high carrier mobility, excellent flexibility, and long-term stability. Therefore, the proposed borophene-based metamaterial will be beneficial in the fields of multi-band perfect absorber in the near future.

Tunable High-Sensitivity Four-Frequency Refractive Index Sensor Based on Graphene Metamaterial.

As graphene-related technology advances, the benefits of graphene metamaterials become more apparent. In this study, a surface-isolated exciton-based absorber is built by running relevant simulations on graphene, which can achieve more than 98% perfect absorption at multiple frequencies in the MWIR (MediumWavelength Infra-Red (MWIR) band as compared to the typical absorber. The absorber consists of three layers: the bottom layer is gold, the middle layer is dielectric, and the top layer is patterned with graphene. Tunability was achieved by electrically altering graphene's Fermi energy, hence the position of the absorption peak. The influence of graphene's relaxation time on the sensor is discussed. Due to the symmetry of its structure, different angles of light source incidence have little effect on the absorption rate, leading to polarization insensitivity, especially for TE waves, and this absorber has polarization insensitivity at ultra-wide-angle degrees. The sensor is characterized by its tunability, polarisation insensitivity, and high sensitivity, with a sensitivity of up to 21.60 THz/refractive index unit (RIU). This paper demonstrates the feasibility of the multi-frequency sensor and provides a theoretical basis for the realization of the multi-frequency sensor. This makes it possible to apply it to high-sensitivity sensors.

Design and performance analysis of a mid-infrared broadband thermally tunable metamaterial absorption device based on the phase-change effect.

We propose a structurally simple, innovative, and multifunctional mid-infrared broadband thermally tunable metamaterial absorption device. The absorption device consists of a three-layer structure, from bottom to top: Ti substrate, SiO2 dielectric layer, and patterned VO2 layer. Through temperature control, the average absorption intensity of the absorption device can vary between 0.08 and 0.94. The absorption device's absorption mechanism is rooted in the thermal phase-change characteristics exhibited by the topologically patterned VO2. When the temperature is below 340 K, VO2 is in a dielectric state, resulting in near-total reflection performance in the mid-infrared range. When the temperature is above 340 K, VO2 undergoes a dielectric-to-metal transition, enabling the absorption device to achieve an average absorption rate of 94.12% in the ultra-wideband range of 6.26 µm-20.96 µm in the mid-infrared. This absorption range completely covers the atmospheric window wavelengths of 8 µm-14 µm, demonstrating high practical value. We explain the working mechanism of the absorption device from the perspective of the electromagnetic field. Subsequently, we study the variations in the absorption curve of the absorption device at different temperatures of VO2 and use the changes in the electric field at the same wavelength under different temperatures to explain the variations in absorption. Compared to previous work, our structure has only three layers in a single unit, making it easy to process and produce. Additionally, the absorption device's operating bandwidth and average absorption rate in the mid-infrared range have been significantly improved. Furthermore, the absorption device exhibits substantial incident angle tolerance and polarization insensitivity. We believe that this design has broad application potential in future optothermal conversion, infrared stealth, and thermal radiation.

An active controllable wide-angle and ultra-wideband terahertz absorber/reflector based on VO2 metamaterial.

The use of metamaterials in the design of optics is an important strategy for controlling light fields. Numerous terahertz metamaterial devices have been recently designed; however, their performance is relatively limited. Here, the thermally induced phase change characteristics of vanadium dioxide (VO2) were harnessed to design a perfect wide-angle and ultra-wideband switchable terahertz absorber/reflector with a simple structure and three layers from top to bottom (VO2, SiO2, and Au). The absorption mechanism based on the impedance matching theory and electric field distribution was investigated, and the influence of structural parameters on the absorption rate and performance of the absorber in a wide wave vector range were analyzed. The study findings showed that the device perfectly absorbed a bandwidth of over 6.0 THz (absorption >90%). The absorption (reflection) was modulated from 0.01 to 0.999 with the change of the background temperature. More importantly, the device could switch between complete ultra-wideband reflection and perfect absorption over a wide angle range. This study provides important insights into the design of terahertz functional devices.

Simultaneous Passivation of Perovskite Interfaces at Multiple Active Sites Improves Device Performance: Combining Theory and Experiment.

A multisite interface passivation material named 2-mercapto-4-methyl-5-thiazoleacetic acid (MMTA) is used to optimize the perovskite film top interface. DFT calculations and experiments show that MMTA can effectively passivate interface defects. Finally, the champion device's photoelectric conversion efficiency reached 23.44%, which possessed long-term stability.

Multi-band perfect absorber based on an elliptical cavity coupled with an elliptical metal nanorod.

We proposed a triple-band narrowband device based on a metal-insulator-metal (MIM) structure in visible and near-infrared regions. The finite difference time domain (FDTD) simulated results illustrated that the absorber possessed three perfect absorption peaks under TM polarization, and the absorption efficiencies were about 99.76%, 99.99%, and 99.92% at 785 nm, 975 nm, and 1132 nm, respectively. Simulation results matched well with the results of coupled-mode theory (CMT). Analyses of the distributions of the electric field indicated the "perfect" absorption was due to localized surface plasmon polaritons resonance (LSPPR) and Fabry-Perot resonance. We developed a multi-band absorber with more ellipsoid pillars. The four band-absorbing device presented perfect absorption at 767 nm, 1046 nm, 1122 nm, and 1303 nm, and the absorption rates were 99.45%, 99.41%, 99.99%, and 99.94%, respectively. By changing the refractive index of the surrounding medium, the resonant wavelengths could be tuned linearly. The maximum sensitivity and Figure of Merit were 230 nm RIU-1 and 10.84 RIU-1, respectively. The elliptical structural design provides more tuning degrees of freedom. The absorber possessed several satisfactory performances: excellent absorption behavior, multiple bands, tunability, incident insensitivity, and simple structure. Therefore, the designed absorbing device has enormous potential in optoelectronic detection, optical switching, and imaging.

All layers patterned conical nanostructured thin-film silicon solar cells for light-trapping efficiency improvement.

Thin-film silicon solar cells (TSSC) has received great attention due to its advantages of low cost and eco-friendly. However, traditional single-layer patterned solar cells (SPSC) still fall short in light-trapping efficiency. This article presents an all layers patterned (ALP) conical nanostructured TSSC to enhance the low absorption caused by the thin absorption layers. The Finite-Difference Time-Domain result shows that a photocurrent density up to 41.27 mA/cm2 can be obtained for the structure, which is 31.39% higher than that of the SPSC. An electrical optimization simulation of doping concentration was carried out on the parameters of the optically optimal structure of the model. The power conversion efficiency is 17.15%, which is 1.72 times higher than that of the planar structure. These results demonstrate a success for the potential and prospect of the fully patterned nanostructures in thin-film photovoltaic devices.

Nano spinel NiAl2O4: structure, optical and photocatalytic performance evaluation and optimization.

Four kinds of spinel NiAl2O4were synthesized by the polyacrylamide gel method using Al2(SO4)3·18H2O and Al(NO3)3·9H2O as aluminum salts and anhydrous NiSO4and NiSO4·6H2O as nickel salts. The effects of different aluminum salts and nickel salts on the structure, optical and photocatalytic activity of spinel NiAl2O4were confirmed by various characterizations. There is no NiO impurity in the spinel NiAl2O4synthesized with Al2(SO4)3·18H2O as aluminum salt, while NiAl2O4, NiO and C-O functional group coexist in the target product with Al(NO3)3·9H2O as aluminum salt, and C-O functional group and NiO inhibits the photocatalytic activity of the system. Based on photocatalytic experiment, response surface methodology and free radical verification experiment, the influence of experimental parameters including synthesis pathway, initial drug concentration, initialpHand catalyst content on the photocatalytic activity of spinel NiAl2O4and the main active species involved in the reaction were investigated. The degradation percentage of spinel NiAl2O4synthesized with Al2(SO4)3·18H2O as aluminum salt and NiSO4·6H2O as nickel salt was 86.3% at the initial concentration of 50 mg l-1,pH= 5.33 and catalyst content of 1 g l-1. The mechanism investigation confirmed that the C-O functional group plays the dual role of impurity level and electron transfer in the degradation of tetracycline hydrochloride by spinel NiAl2O4.

An ultra-broadband solar absorber based on α-GST/Fe metamaterials from visible light to mid-infrared.

In this paper, we proposed an ultra-broadband and high absorption rate absorber based on Fe materials. The proposed absorber consists of a rectangle pillar, two rings, a SiO2 film, a Ge2Sb2Te5(GST) planar cavity, an Fe mirror, and a SiO2 substrate. The average absorption reaches 98.45% in the range of 400-4597 nm. We investigate and analyze the electric field distributions. The analysis of the physical mechanism behind the broadband absorption effect reveals that it is driven by excited surface plasmons. Furthermore, the absorber can maintain high absorption efficiency under a large incident angle. The geometrical symmetric structure possesses polarization insensitivity properties. The proposed structure allows for certain manufacturing errors, which improves the feasibility of the actual manufacture. Then, we investigate the effect of different materials on absorption. Finally, we study the matching degree between the energy absorption spectrum and the standard solar spectrum under AM 1.5. The results reveal that the energy absorption spectrum matches well with the standard solar spectrum under AM 1.5 over the full range of 400 to 6000 nm. In contrast, energy loss can be negligible. The absorber possesses ultra-broadband perfect absorption, a high absorption rate, and a simple structure which is easy to manufacture. It has tremendous application potential in many areas, such as solar energy capture, thermal photovoltaics, terminal imaging, and other optoelectronic devices.

Terahertz absorber based on vanadium dioxide with high sensitivity and switching capability between ultra-wideband and ultra-narrowband.

The terahertz perfect absorber can be applied in the control, sensing and modulation of optical fields in micro- and nanostructures. However, they are only single function, complex device structure and low sensing sensitivity. Based on this, by introducing the bound state in the continuum (BIC) with infinite quality factor and field enhancement effect, and taking advantage of the phase transition characteristics of vanadium dioxide (VO2), we designed a terahertz perfect absorber device which can actively switch between ultra-wideband and ultra-narrowband. The absorption mechanism is explained by multipole analysis theory, impedance matching theory and electromagnetic field distribution. The broadband absorption is mainly due to the electric dipole resonance on metallic VO2 materials, and the absorption is more than 99% across 3.64-6.96 THz, and it has excellent characteristics such as robustness. Ultra-narrowband perfect absorption has a quality factor greater than 2200 due mainly to the implementation of symmetrically protected BIC with a sensing sensitivity of 2.575 THz per RIU. Therefore, this research could be widely used in the fields of integrated optical circuits, optoelectronic sensing and perceptual modulation of energy, as well as providing additional design ideas for the design of terahertz multifunctional devices.

Design of Surface Plasmon Resonance-Based D-Type Double Open-Loop Channels PCF for Temperature Sensing.

Here, we document a D-type double open-loop channel floor plasmon resonance (SPR) photonic crystal fiber (PCF) for temperature sensing. The grooves are designed on the polished surfaces of the pinnacle and backside of the PCF and covered with a gold (Au) film, and stomata are distributed around the PCF core in a progressive, periodic arrangement. Two air holes between the Au membrane and the PCF core are designed to shape a leakage window, which no longer solely averts the outward diffusion of Y-polarized (Y-POL) core mode energy, but also sets off its coupling with the Au movie from the leakage window. This SPR-PCF sensor uses the temperature-sensitive property of Polydimethylsiloxane (PDMS) to reap the motive of temperature sensing. Our lookup effects point out that these SPR-PCF sensors have a temperature sensitivity of up to 3757 pm/°C when the temperature varies from 5 °C to 45 °C. In addition, the maximum refractive index sensitivity (RIS) of the SPR-PCF sensor is as excessive as 4847 nm/RIU. These proposed SPR-PCF temperature sensors have an easy nanostructure and proper sensing performance, which now not solely improve the overall sensing performance of small-diameter fiber optic temperature sensors, but also have vast application prospects in geo-logical exploration, biological monitoring, and meteorological prediction due to their remarkable RIS and exclusive nanostructure.

Design of a Penta-Band Graphene-Based Terahertz Metamaterial Absorber with Fine Sensing Performance.

This paper presents a new theoretical proposal for a surface plasmon resonance (SPR) terahertz metamaterial absorber with five narrow absorption peaks. The overall structure comprises a sandwich stack consisting of a gold bottom layer, a silica medium, and a single-layer patterned graphene array on top. COMSOL simulation represents that the five absorption peaks under TE polarization are at fI = 1.99 THz (95.82%), fⅡ = 6.00 THz (98.47%), fⅢ = 7.37 THz (98.72%), fⅣ = 8.47 THz (99.87%), and fV = 9.38 THz (97.20%), respectively, which is almost consistent with the absorption performance under TM polarization. In contrast to noble metal absorbers, its absorption rates and resonance frequencies can be dynamically regulated by controlling the Fermi level and relaxation time of graphene. In addition, the device can maintain high absorptivity at 0~50° in TE polarization and 0~40° in TM polarization. The maximum refractive index sensitivity can reach SV = 1.75 THz/RIU, and the maximum figure of merit (FOM) can reach FOMV = 12.774 RIU-1. In conclusion, our design has the properties of dynamic tunability, polarization independence, wide-incident-angle absorption, and fine refractive index sensitivity. We believe that the device has potential applications in photodetectors, active optoelectronic devices, sensors, and other related fields.

Effects of different cladding materials on orbital angular momentum modes propagating in photonic crystal fibers.

With the development of orbital angular momentum (OAM) photonic crystal fibers (PCFs) for more efficient communication, fiber claddings are important to the performance. In this paper, the influence of S i O 2 and four new optical materials, which are amethyst, SSK2, SF11, and LaSF09, as cladding materials, on the OAM mode characteristics is studied based on a common PCF for OAM transmission. In addition, the effective index difference, dispersion, confinement loss, and other properties of OAM modes transmitted in the five materials are derived by the finite element method. After in-depth analysis, universal rules can be obtained as guidelines for optimization of PCF in the future for improving the efficiency of optical fiber communication. Through chart analysis, it can be concluded that when materials of high effective refractive indices are used as cladding materials for PCF, the dispersion, nonlinear coefficient, confinement loss, mode purity, and other properties are significantly improved. Lower dispersion and confinement loss are more conducive to long-distance communication transmission. The decrease in nonlinear coefficient represents a better effect in suppressing nonlinear effects, and the increase in numerical aperture and mode purity respectively improves the transmission efficiency and stability of OAM communication. These conclusions provide universal rules for high-quality communication in the future.

A TM polarization absorber based on a graphene-silver asymmetrical grating structure for near-infrared frequencies.

In this paper, a TM polarization multi-band absorber is achieved in a graphene-Ag asymmetrical grating structure. The proposed absorber can achieve perfect absorption at 1108 nm, 1254 nm, and 1712 nm (the absorption exceeds 98.4% at the three peaks). Results show that the perfect absorption effect originates from the excitation of magnetic polaritons (MPs) in the silver ridge grating; a LC equivalent circuit model is utilized to confirm the finite-difference-time-domain (FDTD) simulation. The influences of the incident angle, polarization angle, and geometrical size on the absorption spectrum are investigated. Moreover, a quadruple band absorber and a quintuple band absorber are also designed by introducing more silver grating ridges in one period. The proposed graphene-Ag asymmetrical structure has some advantages compared with other absorbers such as the ability to be independently tuned and a simple structure. Thus, the proposed structure can be applied in the areas of multiple absorption switches, near-infrared modulators, and sensors.

Ultra-Wideband High-Efficiency Solar Absorber and Thermal Emitter Based on Semiconductor InAs Microstructures.

Since the use of chemical fuels is permanently damaging the environment, the need for new energy sources is urgent for mankind. Given that solar energy is a clean and sustainable energy source, this study investigates and proposes a six-layer composite ultra-wideband high-efficiency solar absorber with an annular microstructure. It achieves this by using a combination of the properties of metamaterials and the quantum confinement effects of semiconductor materials. The substrate is W-Ti-Al2O3, and the microstructure is an annular InAs-square InAs film-Ti film combination. We used Lumerical Solutions' FDTD solution program to simulate the absorber and calculate the model's absorption, field distribution, and thermal radiation efficiency (when it is used as a thermal emitter), and further explored the physical mechanism of the model's ultra-broadband absorption. Our model has an average absorption of 95.80% in the 283-3615 nm band, 95.66% in the 280-4000 nm band, and a weighted average absorption efficiency of 95.78% under AM1.5 illumination. Meanwhile, the reflectance of the model in the 5586-20,000 nm band is all higher than 80%, with an average reflectance of 94.52%, which has a good thermal infrared suppression performance. It is 95.42% under thermal radiation at 1000 K. It has outstanding performance when employed as a thermal emitter as well. Additionally, simulation results show that the absorber has good polarization and incidence angle insensitivity. The model may be applied to photodetection, thermophotovoltaics, bio-detection, imaging, thermal ion emission, and solar water evaporation for water purification.

Highly sensitive plasmonic sensor based on eccentric-core photonic crystal fibers.

To further reduce the fabrication difficulty of optical fiber sensors and improve the sensing performance, this study introduced the surface plasmon resonance (SPR) effect into optical fiber sensing technology and designed an eccentric-core photonic crystal fiber (EC-PCF). We investigated the characteristics of the two fundamental modes in the fiber core and the surface plasmon polariton (SPP) modes on the surface of the gold film. We also investigated the influence of the structural parameters, such as gold film coating area and thickness, air hole diameter, and eccentricity, on the confinement loss and achieved a refractive index (RI) sensitivity of 31.25 µm RIU-1 in the RI range of 1.29-1.43, corresponding to a figure of merit (FOM) of 521.6 per RIU. When the resolution of the optical spectrum analyzer was 0.1 nm, the EC-PCF could achieve a refractive index resolution of 3.2 × 10-6 RIU. Moreover, we performed tests with two typical sensing types, one in which the sensor was directly in contact with adulterated gasoline to achieve kerosene-concentration detection, and another in which the sensor was coated with a layer of polydimethylsiloxane (PDMS), whose RI is sensitive to the temperature field, to achieve temperature sensing. The EC-PCF demonstrated excellent sensing performance and offers obvious manufacturing advantages, providing a new and easily fabricated structural design idea for optical fiber sensing.

A dual-band hydrogen sensor based on Tamm plasmon polaritons.

Optical hydrogen sensors possess significant potential in various fields, including aerospace and fuel cell applications, which is due to their compact design and immunity to electromagnetic interference. However, commonly used sensors mostly use single-band sensing, which increases the risk of inaccurate measurements due to environmental interference or operational errors. To address this issue, this study proposes a dual-band hydrogen sensor comprising a Pd metal layer, a dielectric spacer layer, a defect layer, and a photonic crystal. By leveraging the interaction between the defect mode in the excitonic microcavity structure and the Tamm plasmon polaritons (TPPs) and Fabry-Perot (FP) resonances, the structure simultaneously generates two near-zero resonance valleys in the visible wavelength range. By adjusting the thickness of the defect layer, the coupling effect of the defect mode and TPPs together with FP resonance respectively is optimized. When the thickness is 0.27 µm, the sensitivities of the Tamm resonance band and FP resonance band are 239 and 21 RIU-1, respectively. Compared with the common sensors with a single band, its low-sensitivity wavelength can be used as a reference to assist the high-sensitivity wavelength for sensing. In addition, we find that the proposed sensor, through calculation, has good fault tolerance for both the thickness of the defect layer and the incident light angle. This study demonstrates a dual-band hydrogen sensor with TPPs, which is important for exploring new optical hydrogen sensors.

Dynamically changeable terahertz metamaterial absorbers with intelligent switch and high sensitivity and wide and narrow band perfect absorption.

In this work, we theoretically designed a dynamically changeable terahertz metamaterial absorber with intelligent switch and high sensitivity, wide band and narrow band perfect absorption based on the combination of Dirac semimetal (BDS) and vanadium dioxide (VO2). It features two methods for absorption adjustment: altering the Fermi energy level of BDS to modify the resonant frequency of the absorption peaks and utilizing the phase change of VO2 to regulate the absorption rate of the peaks. In addition, its rotational symmetric design ensures strong polarization-insensitivity. The simulation results demonstrate the presence of two narrowband absorption peaks and one mini-broadband absorption peak within the frequency range of 6.0-9.5 THz, all with absorption rates exceeding 90%. We provide an explanation of the absorption mechanism of the device, employing the relative impedance theory and localized surface plasmon resonance to analyze its electric field distribution. We also defined the refractive index sensitivity (S), which is SI = 378 GHz per RIU and SIII = 204 GHz per RIU. Our device possesses high sensitivity and two methods of adjusting absorption modes, which endow it with advantages in the fields of metamaterial absorbers, intelligent switch, and optical sensors.

Study on the Thermal Distribution Characteristics of a Molten Quartz Ceramic Surface under Quartz Lamp Radiation.

More and more researchers are studying the heat transfer performance of aeronautical materials at high temperatures. In this paper, we use a quartz lamp to irradiate fused quartz ceramic materials, and the sample surface temperature and heat flux distribution were obtained at a heating power of 45~150 kW. Furthermore, the heat transfer properties of the material were analyzed using a finite element method and the effect of surface heat flow on the internal temperature field was investigated. The results show that the fiber skeleton structure has a significant effect on the thermal insulation performance of fiber-reinforced fused quartz ceramics and the longitudinal heat transfer along the rod fiber skeleton is slower. As time passes, the surface temperature distribution tends to stability and reaches an equilibrium state. The surface temperature of fused quartz ceramic increases with the increase in the radiant heat flux of the quartz lamp array. When the input power is 5 kW, the maximum surface temperature of the sample can reach 1153 °C. However, the non-uniformity of the sample surface temperature also increases, reaching a maximum uncertainty of 12.28%. The research in this paper provides important theoretical guidance for the heat insulation design of ultra-high acoustic velocity aircraft.