A Quadrivalent mRNA Immunization Elicits Potent Immune Responses against Multiple Orthopoxviral Antigens and Neutralization of Monkeypox Virus in Rodent Models.

The global outbreak of the 2022 monkeypox virus infection of humans and the 2023 documentation of a more virulent monkeypox in the Democratic Republic of the Congo raised public health concerns about the threat of human-to-human transmission of zoonotic diseases. Currently available vaccines may not be sufficient to contain outbreaks of a more transmissible and pathogenic orthopoxvirus. Development of a safe, effective, and scalable vaccine against orthopoxviruses to stockpile for future emergencies is imminent. In this study, we have developed an mRNA vaccine candidate, ALAB-LNP, expressing four vaccinia viral antigens A27, L1, A33, and B5 in tandem in one molecule, and evaluated the vaccine immunogenicity in rodent models. Immunization of animals with the candidate mRNA vaccine induced a potent cellular immune response and long-lasting antigen-specific binding antibody and neutralizing antibody responses against vaccinia virus. Strikingly, the sera from the vaccine-immunized mice cross-reacted with all four homologous antigens of multiple orthopoxviruses and neutralized monkeypox virus in vitro, holding promise for this mRNA vaccine candidate to be used for protection of humans from the infection of monkeypox and other orthopoxvirus.

Micro-fluidic Spray Freeze Dried Ciprofloxacin Hydrochloride-Embedded Dry Powder for Inhalation.

Active pharmaceutical ingredient (API)-embedded dry powder for inhalation (AeDPI) is highly desirable for pulmonary delivery of high-dose drug. Herein, a series of spray freeze-dried (SFD) ciprofloxacin hydrochloride (CH)-embedded dry powders were fabricated via a self-designed micro-fluidic spray freeze tower (MFSFT) capable of tuning freezing temperature of cooling air as the refrigerant medium. The effects of total solid content (TSC), mass ratio of CH to L-leucine (Leu) as the aerosol dispersion enhancer, and the freezing temperature on particle morphology, size, density, moisture content, crystal properties, flowability, and aerodynamic performance were investigated. It was found that the Leu content and freezing temperature had considerable influence on the fine particle fraction (FPF) of the SFD microparticles. The optimal formulation (CH/Leu = 7:3, TSC = 2%w/w) prepared at - 40°C exhibited remarkable effective drug deposition (~ 33.38%), good aerodynamic performance (~ 47.69% FPF), and excellent storage stability with ultralow hygroscopicity (~ 1.93%). This work demonstrated the promising feasibility of using the MFSFT instead of conventional liquid nitrogen assisted method in the research and development of high-dose AeDPI.

Spray Dried Levodopa-Doped Powder Potentially for Intranasal Delivery.

This work was aimed to develop levodopa (L-dopa) nasal powder to achieve controllable drug release and high nasal deposition efficiency. A series of uniform microparticles, composed of amorphous L-dopa and excipients of hydroxypropyl methyl cellulose (HPMC), polyvinylpyrrolidone (PVP), or hydroxypropyl-ß-cyclodextrin (CD), were fabricated by a self-designed micro-fluidic spray dryer. The effects of excipient type and drug/excipient mass ratio on the particle size, morphology, density, and crystal property, as well as the in vitro performance of drug release, mucoadhesion, and nasal deposition, were investigated. Increased amounts of added excipient, regardless of its type, could accelerate the L-dopa release to different extent. The addition of CD showed the most obvious effect, i.e., ~83% of L-dopa released in 60 min for SD-L1CD2, compared to 37% for raw L-dopa. HPMC could more apparently improve the particle mucoadhesion than PVP and CD, with respective adhesive forces of ~269, 111, and 26 nN for SD-L1H2, -L1P2, and -L1CD2. Nevertheless, the deposition fractions in the olfactory region for such samples were almost the same (~14%), probably ascribable to their quite similar particle aerodynamic diameter (~30 µm). This work demonstrates a feasible methodology for the development of nasal powder.

Spray dried hydroxyapatite-based supraparticles with uniform and controllable size and morphology.

This work aims to prepare uniform spray dried hydroxyapatite-based (SD HAP-based) supraparticles with controllable morphology via micro-fluidic spray drying. Sodium polyacrylate (PAAS) and sodium chloride (NaCl) were used to prepare the precursor suspensions by regulating the inter-particle repulsive forces and electrostatic shielding effect, respectively. The particle size (D50) and zeta potential of the suspension were highly associated with the mass ratio of HAP to PAAS (mH/mP) and the NaCl concentration (CNaCl), which further had significant effect on the permeability (k) of the droplet shell formed during spray drying and ultimately the supraparticle morphology. D50 ˂ 2 µm and absolute zeta potential ˃ 20 mV, obtained when mH/mP ˂ 100 under low CNaCl, rendered ultralow k and consequently deformed supraparticles; Whereas D50 ˃ 2 µm and absolute zeta potential ˂ 20 mV, achieved by decreasing PAAS amount, i.e. mH/mP ≥ 100 or improving CNaCl to efficiently screen surface net charge of HAP, high k and spherical supraparticles were thus preferentially formed.

Stable Perovskite Quantum Dots Coated with Superhydrophobic Organosilica Shells for White Light-Emitting Diodes.

Metalammonium lead perovskite (MAPbX3 , MA=CH3 NH3 + ; X=Cl, Br, I) quantum dots (QDs) have attracted tremendous attention due to their outstanding optical properties. However, they usually suffer from poor stability towards water or moisture, which seriously limits their practical applications. Here, we report a simple and effective approach to improve the stability of MAPbBr3 QDs by encapsulating them with superhydrophobic fluorinated organosilica (FSiO2 ) shells. The water-resistant stability of the superhydrophobic MAPbBr3 QDs/FSiO2 is significantly enhanced and they display strong fluorescence even after immersion in water for 12 hours. This method is readily extended to prepare superhydrophobic MAPbBr2.4 Cl0.6 QDs/FSiO2 and MAPbI3 QDs/FSiO2 powders. These superhydrophobic MAPbX3 QDs/FSiO2 can be further used to fabricate white light-emitting diodes (LEDs) with comparable color to pure white emission.

Novel Polymeric Organosilica Precursor and Emulsion Stabilizer: Toward Highly Elastic Hollow Organosilica Nanospheres.

The fabrication of hollow organosilica nanoparticles with high elasticity is greatly desirable but still challenging. Herein, we present a new and simple strategy to prepare such nanoparticles by using hyperbranched polyvinylpolytrimethoxysilane (PVPMS) via a soap-free oil in water (O/W) emulsion system. PVPMS was synthesized through the radical polymerization of vinyltrimethoxysilane (VMS) followed by the acid-catalyzed hydrolytic polycondensation of trimethoxysilyl groups, which works not only as an organosilica precursor but also as a sole emulsion stabilizer due to its hydrolysis-induced amphiphilicity at the oil/water interface. When styrene was used as the oil phase and initiated to polymerize, hybrid polystyrene (PS) core-organosilica shell (PS@organosilica) nanoparticles were obtained by controlling the reaction conditions. Furthermore, highly elastic hollow organosilica nanospheres with low Young's modulus (∼220 MPa) were yielded through solvent etching of the core. This study expands the scope of organosilica precursor from small molecule organosilane to polymeric macromolecule and provides useful guidance for application in other polyorganosilsesquioxane related hybrid organosilica particles and functional hollow nanoparticles.

Controlled assembly of plasmonic nanoparticles using neutral-charged diblock copolymers.

In this study, our aim was to control the assembly of plasmonic nanoparticles by using the electrostatic assembly of oppositely charged colloidal species. Gold nanoparticles (Au NPs) were modified with a carboxyl-terminated polymeric ligand, O-(2-carboxyethyl)-O'-(2-mercaptoethyl) heptaethylene glycol (SH-PEG7-COOH), so that they are negatively charged on the pH range 5-10 and they stand elevated ionic strength (up to 1M NaCl) without loss of colloidal stability. Block copolymers poly[(ethylene glycol) methyl ether-block-(N,N-dimethylamino-2-ethyl methacrylate)] (mPEG-PDMAEMA), with a neutral mPEG block and a pH-sensitive positively charged PDMAEMA block were synthesized by atom transfer radical polymerization (ATRP). The formation of complexes, driven by the electrostatic attraction between opposite charges and by the release of the condensed counter ions, was investigated using dynamic light scattering and spectrophotometry. The relative quantities of polymer chains and nanoparticles in the suspension were shown to affect the size of the formed complexes. In this report, it is also shown that the complex formation is reversible. Stable complexes of typical size 400 nm were formed, which could be used as building blocks for new optical materials.

Thermoresponsive diblock copolymer with tunable soluble-insoluble and soluble-insoluble-soluble transitions.

The thermoresponsive transition behavior of a diblock copolymer consisting of poly(ethylene glycol) methyl ether (mPEG) and poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) in aqueous solutions has been investigated. With a specific composition, the copolymer showed a unique tunable phase transition from no response in acidic media to a soluble-insoluble (S-I) transition in neutral media and an S-I-S transition in basic media either in the presence of salt or for salt-free solutions. The S-I-S transition can be tuned over a wide temperature range even to an S-I type transition just by adding salts. In addition, phase transitions can occur in both pure water and saline solution under practical conditions (30-80 °C), which makes them suitable for a broad range of applications.

Effect of composition of PDMAEMA-b-PAA block copolymers on their pH- and temperature-responsive behaviors.

A series of poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) homopolymers and poly(2-(dimethylamino)ethyl methacrylate)-b-poly(acrylic acid) (PDMAEMA-b-PAA) diblock copolymers were synthesized by atomic transfer radical polymerization. Thanks to a fine-tuning of the hydrophobic-hydrophilic balance by varying the molecular weight of the polymers and the pH of the aqueous solutions, as well as the composition for the block copolymers, the lower critical solution temperature (LCST) and the aggregation-dissolution kinetics of PDMAEMA homopolymers and PDMAEMA-b-PAA block copolymers can be adjusted. For the block copolymers, the results show that larger relative size of the PDMAEMA blocks leads to an increasing tendency to form micellar aggregates and a decrease of the LCST of the aqueous solution, which is consistent with the increasing copolymer hydrophobicity. A significant difference of the stimuli-responsive behavior between PDMAEMA-rich and PAA-rich copolymers is observed, because the former exhibit thermo-responsive behavior in a broad temperature range of 40-60 °C in basic media, while the pH-responsive behavior is dominant, and only a weak thermo-responsive behavior is exhibited around the specific isoelectric point (IEP) in the latter case. The aggregation rate is strongly influenced by temperature, molecular weight, structure, and composition of the polymer. Specifically, temperature has a stronger effect than the molar ratio of the PDMAEMA segment in the copolymer (related to its hydrophobicity) and the chain molecular weight, although the PDMAEMA-b-PAA copolymers show faster aggregation rate than do the PDMAEMA homopolymers.