Proliferation and differentiation of MC3T3-E1 cells on polymethyl methacrylate cements containing Fe3O4 and TiO2 for hyperthermic treatment of metastatic bone tumors.

Polymethyl methacrylate (PMMA) bone cement is widely used to relieve pain caused by metastatic bone tumors. We previously found that PMMA bone cement containing 15 mass% or more of TiO2 showed good apatite-forming ability, and 25 mass% or more of Fe3O4 generated sufficient heat for hyperthermia under an alternating current (AC) magnetic field. In this study, the cytocompatibility of PMMA bone cement with Fe3O4:TiO2 weight ratios of 25:15 (F25T15-3/2-42) and 30:15 (F30T15-3/2-42) was evaluated using osteoblastic cells (MC3T3-E1). The proliferation and differentiation of MC3T3-E1 cells were suppressed for F25T15-3/2-42 and F30T15-3/2-42 compared to PMMA bone cement without Fe3O4 and TiO2 (F0T0-3/2-42). The release of methyl methacrylate (MMA) monomers from F25T15-3/2-42 and F30T15-3/2-42 at 7 days was about 33 and 50 times higher than that from F0T0-3/2-42, respectively. The remarkable release of MMA monomers from F25T15-3/2-42 and F30T15-3/2-42 may be responsible for the suppressed proliferation and differentiation of MC3T3-E1 cells. The release of MMA monomers was not reduced when the MMA/PMMA weight ratio was decreased from 3/2 to 1/1, however, it was significantly reduced by increasing the content of benzoyl peroxide (BPO) and N, N-dimethyl-p-toluidine (DMPT) to 8 and 4 mass% against MMA, respectively. Proliferation and differentiation of MC3T3-E1 cells on PMMA-type cements containing Fe3O4 and TiO2 with increased BPO and DMPT contents need to be investigated in the future; however, our findings will be useful for designing PMMA cements for the hyperthermic treatment of metastatic bone tumors.

Visible-Light-Enhanced Antibacterial Activity of Silver and Copper Co-Doped Titania Formed on Titanium via Chemical and Thermal Treatments.

Dental implants made of titanium (Ti) are used in dentistry, but peri-implantitis is a serious associated problem. Antibacterial and osteoconductive Ti dental implants may decrease the risk of peri-implantitis. In this study, titania (TiO2) co-doped with silver (Ag) at 2.5 at.% and copper (Cu) at 4.9 at.% was formed on Ti substrates via chemical and thermal treatments. The Ag and Cu co-doped TiO2 formed apatite in a simulated body fluid, which suggests osteoconductivity. It also showed antibacterial activity against Escherichia coli, which was enhanced by visible-light irradiation. This enhancement might be caused by the synergistic effect of the release of Ag and Cu and the generation of •OH from the sample. Dental implants with such a Ag and Cu co-doped TiO2 formed on their surface may reduce the risk of peri-implantitis.

Indirect cytotoxicity evaluations of antibacterial raw silk fabric doped with calcium, copper and zinc on fibroblasts and osteoblasts.

Antibacterial materials are widely used to prevent hospital-acquired infections. In our previous report, metal (calcium, copper or zinc)-doped raw silk fabrics were shown to possess strong antibacterial activities against Escherichia coli. However, antibacterial materials may occasionally be harmful to the human body; thus, in this study, we investigated the cytotoxicities of extracts from metal-doped raw silk fabrics with respect to fibroblasts and osteoblasts indirectly. Calcium-doped raw silk fabric demonstrated cytocompatibility with fibroblasts. Contrarily, copper- and zinc-doped raw silk fabrics remarkably decreased the cell densities of fibroblasts, indicating their cytotoxic effects. This observation could be attributed to the high concentrations of the released copper or zinc ions. However, calcium-, copper- and zinc-doped raw silk fabrics did not demonstrate any cytotoxic effects on osteoblasts because a high concentration of the serum alleviated the effects of these metal ions released from the fabrics. Thus, calcium-doped raw silk fabric is a promising antibacterial material that does not induce strong cytotoxicity. This study will facilitate the design of materials that are both antibacterial and safe.

Proteomic identification of serum proteins to induce osteoconductivity of hydroxyapatite.

We performed proteomic analysis of rat serum proteins adsorbed on hydroxyapatite (HAp) and α-alumina (α-Al2O3) in order to identify proteins that specifically adsorb onto HAp and control cellular responses. Proteins with either or both molecular weight of 22-32 kDa and computed isoelectric point of 5.0-5.5 were preferentially adsorbed on HAp. In total, 182 proteins were adsorbed on both HAp and α-Al2O3, of which 14 were highly enriched on HAp, whereas 68 were adsorbed only on HAp. Therefore, 82 (14+68) proteins were further evaluated by bioinformatics and literature-based analyses. We predicted that hepatocyte growth factor and angiopoietin-like protein 3 (ANGPTL3) are candidate proteins responsible for the osteoconductivity of HAp. Although ANGPTL3 promoted the attachment and spreading of MC3T3-E1 cells, it did not promote their proliferation and differentiation. Our results suggest that specific adsorption of ANGPTL3 on HAp induced osteoconductivity by enhancing the attachment and spreading of osteoblasts.

Cytotoxicity evaluation of iron nitride nanoparticles for biomedical applications.

Magnetic nanoparticles are widely studied for their use in various therapeutic and diagnostic purposes. As biomaterials, their biocompatibility is as important as their magnetic properties. Iron nitride (Fex Ny ) has excellent magnetic properties, and thus Fex Ny nanoparticles could be useful as potential biomaterials. However, the biocompatibility of Fex Ny nanoparticles is yet to be investigated. In this study, we assessed the biocompatibility of Fex Ny nanoparticles by evaluating their direct-contact cytotoxicity compared with that of magnetite nanoparticles (MNPs). Rat fibroblasts were incubated with the nanoparticle samples dispersed in culture medium at concentrations of 10, 50, and 100 µg/ml. The DNA concentration measurement, MTT assay, and trypan blue exclusion test were conducted after days 1 and 3 of incubation. After day 1, the cell viability decreased, and cell death increased with increasing sample concentration when compared with the control. However, after day 3, there were no significant differences when compared with the control, irrespective of the sample concentrations. Further, there were no significant differences between the Fex Ny nanoparticles and MNPs at the same concentrations in all the cytotoxicity evaluation tests. Therefore, it is suggested that Fex Ny nanoparticles might be as cytocompatible as the conventional MNPs.

Apatite formation and bacterial growth on raw silk fabric heated in argon gas.

Raw silk has the potential to be a flexible, osteoconductive material because it forms bone-like apatite on its surface in acellular simulated body fluid with ion concentrations nearly 1.5 times greater than that of human plasma (1.5SBF). It has been reported that silk-which has many similarities to raw silk-develops antibacterial properties when heated in inert gas, which may be advantageous in preventing bacterial infection. Hence, raw silk heated in inert gas may be a flexible, osteoconductive material with antibacterial activity. Thus, we examined the effect of the heat treatment of raw silk fabric on its apatite-forming ability in 1.5SBF and on the growth of Escherichia coli. Raw silk fabric was heated in argon gas at several temperatures, to a maximum of 500 °C. The results of soaking tests in 1.5SBF indicate that the apatite-forming ability of raw silk decreases with increasing temperature. This may be because favourable structures for apatite formation, such as carboxyl groups, are thermally decomposed. The results of bacterial tests indicate that raw silk fabrics heated to 300 °C or 500 °C exhibit reduced bacterial growth compared to those that were not heated or were heated only to 100 °C. This might be because hydrophobic surfaces inhibit bacterial adhesion, or because the thermal decomposition of sericin-a component of raw silk-leads to a lack of available nutrients for the bacteria. Although this study did not demonstrate the expected material properties needed for clinical applications, this research contributes to a better understanding of silk biomaterials.