Understanding the impact loading characteristics of a badminton lunge among badminton players.

BACKGROUND: The rapid and repetitive badminton lunges would produce strenuous impact loading on the lower extremities of players and these loading are thought to be the contributing factors of chronic knee injuries. This study examined the impact loading characteristics in various groups of badminton athletes performing extreme lunges. METHODS: Fifty-two participants classified into male skilled, female skilled, male unskilled, and female unskilled groups performed badminton lunge with their maximum-effort. Shoe-ground kinematics, ground reaction forces, and knee moments were measured by using synchronised force platform and motion analysis system. A 2 (gender) x 2 (skill-level) factorial ANOVA was performed to determine the effects of different gender and different playing levels, as well as the interaction of two factors on all variables. RESULTS: Male athletes had faster approaching speed (male 3.87 and female 1.08 m/s), longer maximum lunge distance (male 1.47 and female 1.16 m), larger maximum (male 215.7 and female 121.65 BW/s) and mean loading rate (male 178.43 and female 81.77 BW/s) and larger peak knee flexion moment (male 0.75 and female 0.69) compared with female athletes (P < 0.001). Unskilled athletes exhibited smaller footstrike angle (skilled 45.78 and unskilled 32.35°), longer contact time (skilled 0.69 and unskilled 0.75 s), larger peak horizontal GRF (skilled 1.61 and unskilled 2.40 BW), smaller mean loading rate (skilled 150.15 and unskilled 110.05 BW/s) and larger peak knee flexion moment (P < .05; skilled 0.69 and unskilled 0.75 Nm/BW) than the skilled athletes. In addition, the interaction indicated greater peak GRF impact in female unskilled athletes compared with female skilled athletes (P < 0.001; female skilled 2.01 and female unskilled 2.95 BW), while there was no difference between male participants (P > 0.05; male skilled 2.19 and male unskilled 2.49 BW). CONCLUSIONS: These data suggested that male athletes and/or unskilled athletes experience greater impact loading rates and peak knee flexion moment during lunge compared with female and skilled athletes, respectively. This may expose them to higher risk of overuse injuries. Furthermore, female unskilled athletes seemed to be more vulnerable to lower extremity injuries.

Do running speed and shoe cushioning influence impact loading and tibial shock in basketball players?

BACKGROUND: Tibial stress fracture (TSF) is a common injury in basketball players. This condition has been associated with high tibial shock and impact loading, which can be affected by running speed, footwear condition, and footstrike pattern. However, these relationships were established in runners but not in basketball players, with very little research done on impact loading and speed. Hence, this study compared tibial shock, impact loading, and foot strike pattern in basketball players running at different speeds with different shoe cushioning properties/performances. METHODS: Eighteen male collegiate basketball players performed straight running trials with different shoe cushioning (regular-, better-, and best-cushioning) and running speed conditions (3.0 m/s vs. 6.0 m/s) on a flat instrumented runway. Tri-axial accelerometer, force plate and motion capture system were used to determine tibial accelerations, vertical ground reaction forces and footstrike patterns in each condition, respectively. Comfort perception was indicated on a 150 mm Visual Analogue Scale. A 2 (speed) × 3 (footwear) repeated measures ANOVA was used to examine the main effects of shoe cushioning and running speeds. RESULTS: Greater tibial shock (P < 0.001; η2 = 0.80) and impact loading (P < 0.001; η2 = 0.73-0.87) were experienced at faster running speeds. Interestingly, shoes with regular-cushioning or best-cushioning resulted in greater tibial shock (P = 0.03; η2 = 0.39) and impact loading (P = 0.03; η2 = 0.38-0.68) than shoes with better-cushioning. Basketball players continued using a rearfoot strike during running, regardless of running speed and footwear cushioning conditions (P > 0.14; η2 = 0.13). DISCUSSION: There may be an optimal band of shoe cushioning for better protection against TSF. These findings may provide insights to formulate rehabilitation protocols for basketball players who are recovering from TSF.

Epitaxial growth of znO nanowires over the ZnO thin films deposited on the Si and sapphire substrates.

Epitaxial growth of ZnO nanowires was carried out using a modified thermal evaporation method with inexpensive experimental setup. ZnO nanowires were synthesized using ZnO thin films. The ZnO thin films were deposited as a buffer layer on silicon and sapphire using an impinging flow reactor (IFR). The IFR system is a modified version of a chemical bath deposition (CBD). Films can be created at low temperature, without any metallic catalysts. The properties of Zinc Oxide films are dependant upon the type of substrate used. The same deposition process with a different substrates yields two films with different properties. The most critical effect on growth of ZnO nanowires were dependent the properties of the buffer layer deposited on the substrate. It was not the type of substrate used. A cost-efficient method for epitaxial growth of single crystal ZnO nanowires is proposed in this work.

Catalytic reduction of sulfur dioxide with carbon monoxide over tin dioxide for direct sulfur recovery process.

SO(2) reduction by CO over SnO(2) catalyst was studied in this work. The parameters were the reaction temperature, space velocity (GHSV) and [CO]/[SO(2)] molar ratio. The optimal temperature, GHSV and [CO]/[SO(2)] molar ratio were 550 degrees C, 8000 h(-1) and 2.0, respectively. Under these conditions, the SO(2) conversion and sulfur selectivity were about 78% and 68%, respectively. The following reaction pathway involving two mechanisms was proposed in SO(2) reduction by CO over SnO(2) catalyst: in the first step involving Redox mechanism, the elemental sulfur was produced by the mobility of the lattice oxygen between SO(2) and SnO(2) surface. In the second step, COS was formed by the side reaction between elemental sulfur and CO or metal sulfide and CO. In the third step involving COS intermediate mechanism, the abundant elemental sulfur was produced by the SO(2) reduction by COS which was produced in the second step and was more effective reducing agent than CO.