Atomic Layer Growth of Rutile TiO2 Films with Ultrahigh Dielectric Constants via Crystal Orientation Engineering.

In general, the electronic and optical properties of oxide films can significantly benefit from highly textured crystallinity. However, oxide films grown by atomic layer deposition (ALD), a powerful technique for the synthesis of high-quality, nanoscale thin films, usually exhibit amorphous or randomly oriented polycrystalline phases. Here, we demonstrate the growth of highly textured rutile phase ALD TiO2 films through rational substrate design. Both a- and c-axis preferentially oriented TiO2 films are obtained by varying the lattice parameters of the initial ALD growth surface. Under optimized conditions, we find that it is possible to deposit high-quality, c-axis preferentially aligned TiO2 films with a bulk dielectric constant approaching 185, rivaling the single crystal limit. These films display a remarkably high dielectric constant of 117 despite thin thickness of 5.2 nm. Moreover, the addition of a single doping sequence of Al2O3 successfully suppresses leakage currents to levels compatible with modern dynamic random access memory cells, all the while maintaining the high bulk dielectric constant of 137. These results clearly highlight the prospect of utilizing crystal orientation engineering in ALD thin films for emerging semiconductor devices.

Anti-Inflammatory Effects of Zinc Oxide and Berberine in Rats with Dextran Sulfate Sodium (DSS)-Induced Colitis.

Zinc oxide (ZnO) is frequently used in high concentrations to prevent diarrhea in weaning pigs. However, it can produce environmental pollution, because it is not absorbed by the intestines and is excreted in the feces. In studies to identify an alternative substance to ZnO, we used a model of colitis induced by dextran sulfate sodium (DSS) in rats to compare the anti-inflammatory effects of berberine with ZnO. DSS-treated rats displayed weight loss, shortening of the colon, increased fecal water content, and an increase in the disease activity index (DAI). In contrast, DSS + ZnO- and DSS + berberine-treated rats exhibited reduced colon shortening, decreased fecal water content, and a decrease in the DAI. Histological analysis revealed that both ZnO and berberine treatment reduced epithelial cell damage, crypt destruction, and infiltration of inflammatory cells. Moreover, the liver damage index was not significantly different between ZnO and berberine-treated rats. This study indicated that both ZnO and berberine can improve DSS-induced colitis in rats and suggests berberine as an alternative treatment to ZnO that would not cause environmental pollution.

Effect of Secondary Phase on Passivation Layer of Super Duplex Stainless Steel UNS S 32750: Advanced Safety of Li-Ion Battery Case Materials.

Aluminum, traditionally the primary material for battery casings, is increasingly being replaced by UNS S 30400 for enhanced safety. UNS S 30400 offers superior strength and corrosion resistance compared to aluminum; however, it undergoes a phase transformation owing to stress during processing and a lower high-temperature strength. Duplex stainless steel UNS S 32750, consisting of both austenite and ferrite phases, exhibits excellent strength and corrosion resistance. However, it also precipitates secondary phases at high temperatures, which are known to form through the segregation of Cr and Mo. Various studies have investigated the corrosion resistance of UNS S 32750; however, discrepancies exist regarding the formation and thickness of the passivation layer. This study analyzed the oxygen layer on the surface of UNS S 32750 after secondary-phase precipitation. The microstructure, volume fraction, chemical composition, and depth of O after the precipitation of the secondary phases in UNS S 32750 was examined using FE-SEM, EDS, EPMA and XRD, and the surface chemical composition and passivation layer thickness were analyzed using electron probe microanalysis and glow-discharge spectroscopy. This study demonstrated the segregation of alloy elements and a reduction in the passivation-layer thickness after precipitation from 25 µm to 20 µm. The findings of the analysis aid in elucidating the impact of secondary-phase precipitation on the passivation layer.

Characterization of Salmonella species from poultry slaughterhouses in South Korea: carry-over transmission of Salmonella Thompson ST292 in slaughtering process.

IMPORTANCE: Salmonella outbreaks linked to poultry meat have been reported continuously worldwide. Therefore, Salmonella contamination of poultry meats in slaughterhouses is one of the critical control points for reducing disease outbreaks in humans. OBJECTIVE: This study examined the carry-over contamination of Salmonella species through the entire slaughtering process in South Korea. METHODS: From 2018 to 2019, 1,097 samples were collected from the nine slaughterhouses distributed nationwide. One hundred and seventeen isolates of Salmonella species were identified using the invA gene-specific polymerase chain reaction, as described previously. The serotype, phylogeny, and antimicrobial resistance of isolates were examined. RESULTS: Among the 117 isolates, 93 were serotyped into Salmonella Mbandaka (n = 36 isolates, 30.8%), Salmonella Thompson (n = 33, 28.2%), and Salmonella Infantis (n = 24, 20.5%). Interestingly, allelic profiling showed that all S. Mbandaka isolates belonged to the lineage of the sequence type (ST) 413, whereas all S. Thompson isolates were ST292. Moreover, almost all S. Thompson isolates (97.0%, 32/33 isolates) belonging to ST292 were multidrug-resistant and possessed the major virulence genes whose products are required for full virulence. Both serotypes were distributed widely throughout the slaughtering process. Pulsed-field gel electrophoretic analysis demonstrated that seven S. Infantis showed 100% identities in their phylogenetic relatedness, indicating that they were sequentially transmitted along the slaughtering processes. CONCLUSIONS AND RELEVANCE: This study provides more evidence of the carry-over transmission of Salmonella species during the slaughtering processes. ST292 S. Thompson is a potential pathogenic clone of Salmonella species possibly associated with foodborne outbreaks in South Korea.

Clinical Accuracy, Relevance, Clarity, and Emotional Sensitivity of Large Language Models to Surgical Patient Questions: Cross-Sectional Study.

This cross-sectional study evaluates the clinical accuracy, relevance, clarity, and emotional sensitivity of responses to inquiries from patients undergoing surgery provided by large language models (LLMs), highlighting their potential as adjunct tools in patient communication and education. Our findings demonstrated high performance of LLMs across accuracy, relevance, clarity, and emotional sensitivity, with Anthropic's Claude 2 outperforming OpenAI's ChatGPT and Google's Bard, suggesting LLMs' potential to serve as complementary tools for enhanced information delivery and patient-surgeon interaction.

Study of Precipitated Secondary Phase at 700 °C on the Electrochemical Properties of Super Duplex Stainless Steel AISI2507: Advanced High-Temperature Safety of a Lithium-Ion Battery Case.

Super duplex stainless steel (SDSS) is a suitable structural material for various engineering applications due to its outstanding strength and corrosion resistance. In particular, its high-temperature strength can enhance the safety of electronic products and cars. SDSS AISI2507, known for its excellent strength and high corrosion resistance, was analyzed for its microstructure and electrochemical behavior at the ignition temperature of Li-ion batteries, 700 °C. At 700 °C, AISI2507 exhibited secondary phase precipitation values of 1% and 8% after 5 and 10 h, respectively. Secondary phase precipitation was initiated by the expansion of austenite, forming sigma, chi, and CrN phases. The electrochemical behavior varied with the fraction of secondary phases. Secondary phase precipitation reduced the potential (From -0.25 V to -0.31 V) and increased the current density (From 8 × 10-6 A/cm2 to 3 × 10-6 A/cm2) owing to galvanic corrosion by sigma and chi. As the fraction of secondary phases increased (From 0.0% to 8.1%), the open circuit potential decreased (From -0.25 V to -0.32 V). Secondary phase precipitation is a crucial factor in reducing the corrosion resistance of SDSS AISI2507 and occurs after 1 h of exposure at 700 °C.

Kinetically controlled metal-elastomer nanophases for environmentally resilient stretchable electronics.

Nanophase mixtures, leveraging the complementary strengths of each component, are vital for composites to overcome limitations posed by single elemental materials. Among these, metal-elastomer nanophases are particularly important, holding various practical applications for stretchable electronics. However, the methodology and understanding of nanophase mixing metals and elastomers are limited due to difficulties in blending caused by thermodynamic incompatibility. Here, we present a controlled method using kinetics to mix metal atoms with elastomeric chains on the nanoscale. We find that the chain migration flux and metal deposition rate are key factors, allowing the formation of reticular nanophases when kinetically in-phase. Moreover, we observe spontaneous structural evolution, resulting in gyrified structures akin to the human brain. The hybridized gyrified reticular nanophases exhibit strain-invariant metallic electrical conductivity up to 156% areal strain, unparalleled durability in organic solvents and aqueous environments with pH 2-13, and high mechanical robustness, a prerequisite for environmentally resilient devices.

Probing Quantum Phases in Ultra-High-Mobility Two-Dimensional Electron Systems Using Surface Acoustic Waves.

Transport measurement, which applies an electric field and studies the migration of charged particles, i.e., the current, is the most widely used technique in condensed matter studies. It is generally assumed that the quantum phase remains unchanged when it hosts a sufficiently small probing current, which is, surprisingly, rarely examined experimentally. In this Letter, we study the ultra-high-mobility two-dimensional electron system using a propagating surface acoustic wave, whose traveling speed is affected by the electrons' compressibility. The acoustic power used in our Letter is several orders of magnitude lower than previous reports, and its induced perturbation to the system is smaller than the transport current. Therefore we are able to observe the quantum phases become more incompressible when hosting a perturbative current.

Unlocking the Potential of Porous Bi2Te3-Based Thermoelectrics Using Precise Interface Engineering through Atomic Layer Deposition.

Porous thermoelectric materials offer exciting prospects for improving the thermoelectric performance by significantly reducing the thermal conductivity. Nevertheless, porous structures are affected by issues, including restricted enhancements in performance attributed to decreased electronic conductivity and degraded mechanical strength. This study introduces an innovative strategy for overcoming these challenges using porous Bi0.4Sb1.6Te3 (BST) by combining porous structuring and interface engineering via atomic layer deposition (ALD). Porous BST powder was produced by selectively dissolving KCl in a milled mixture of BST and KCl; the interfaces were engineered by coating ZnO films through ALD. This novel architecture remarkably reduced the thermal conductivity owing to the presence of several nanopores and ZnO/BST heterointerfaces, promoting efficient phonon scattering. Additionally, the ZnO coating mitigated the high resistivity associated with the porous structure, resulting in an improved power factor. Consequently, the ZnO-coated porous BST demonstrated a remarkable enhancement in thermoelectric efficiency, with a maximum zT of approximately 1.53 in the temperature range of 333-353 K, and a zT of 1.44 at 298 K. Furthermore, this approach plays a significant role in enhancing the mechanical strength, effectively mitigating a critical limitation of porous structures. These findings open new avenues for the development of advanced porous thermoelectric materials and highlight their potential for precise interface engineering through the ALD.

Effect of Secondary Phase on Electroless Ni Plating Behaviour of Super Duplex Stainless Steel SAF2507 for Advanced Li-Ion Battery Case.

The development of Li-ion battery cases requires superior electrical conductivity, strength, and corrosion resistance for both cathode and anode to enhance safety and performance. Among the various battery case materials, super duplex stainless steel (SDSS), which is composed of austenite and ferrite as two-phase stainless steel, exhibits outstanding strength and corrosion resistance. However, stainless steel, which is an iron-based material, tends to have lower electrical conductivity. Nevertheless, nickel-plating SDSS can achieve excellent electrical conductivity, making it suitable for Li-ion battery cases. Therefore, this study analysed the plating behaviour of SDSS plates after nickel plating to leverage their exceptional strength and corrosion resistance. Electroless Ni plating was performed to analyse the plating behaviour, and the plating behaviour was studied with reference to different plating durations. Heat treatment was conducted at 1000 °C for one hour, followed by cooling at 50 °C/s. Post-heat treatment, the analysis of phases was executed using FE-SEM, EDS, and EPMA. Electroless Ni plating was performed at 60-300 s. The plating duration after the heat treatment was up to 300 s, and the behaviour of the materials was observed using FE-SEM. The phase analysis concerning different plating durations was conducted using XRD. Post-heat treatment, the precipitated secondary phases in SAF2507 were identified as Sigma, Chi, and CrN, approximating a 13% distribution. During the electroless Ni plating, the secondary phase exhibited a plating rate equivalent to that of ferrite, entirely plating at around 180 s. Further increments in plating time displayed growth of the plating layer from the austenite direction towards the ferrite, accompanied by a reduced influence from the substrate. Despite the differences in composition, both the secondary phase and austenite demonstrated comparable plating rates, showing that electroless Ni plating on SDSS was primarily influenced by the substrate, a finding which was primarily confirmed through phase analysis.

Combined antimicrobial effect of two peptide nucleic acids against Staphylococcus aureus and S. pseudintermedius veterinary isolates.

BACKGROUND: Staphylococcus aureus and S. pseudintermedius are the major etiological agents of staphylococcal infections in humans, livestock, and companion animals. The misuse of antimicrobial drugs has led to the emergence of antimicrobial-resistant Staphylococcus spp., including methicillin-resistant S. aureus (MRSA) and methicillin-resistant S. pseudintermedius (MRSP). One novel therapeutic approach against MRSA and MRSP is a peptide nucleic acid (PNA) that can bind to the target nucleotide strands and block expression. Previously, two PNAs conjugated with cell-penetrating peptides (P-PNAs), antisense PNA (ASP)-cmk and ASP-deoD, targeting two essential genes in S. aureus, were constructed, and their antibacterial activities were analyzed. OBJECTIVES: This study analyzed the combined antibacterial effects of P-PNAs on S. aureus and S. pseudintermedius clinical isolates. METHODS: S. aureus ATCC 29740 cells were treated simultaneously with serially diluted ASP-cmk and ASP-deoD, and the minimal inhibitory concentrations (MICs) were measured. The combined P-PNA mixture was then treated with S. aureus and S. pseudintermedius veterinary isolates at the determined MIC, and the antibacterial effect was examined. RESULTS: The combined treatment of two P-PNAs showed higher antibacterial activity than the individual treatments. The MICs of two individual P-PNAs were 20 and 25 µM, whereas that of the combined treatment was 10 µM. The application of a combined treatment to clinical Staphylococcus spp. revealed S. aureus isolates to be resistant to P-PNAs and S. pseudintermedius isolates to be susceptible. CONCLUSIONS: These observations highlight the complexity of designing ASPs with high efficacy for potential applications in treating staphylococcal infections in humans and animals.

Association Between Race and Short-Term Outcomes Across 3988 Consecutive Single-Level Spinal Fusions.

BACKGROUND AND OBJECTIVES: Race has implications for access to medical care. However, the impact of race, after access to care has been attained, remains poorly understood. The objective of this study was to isolate the relationship between race and short-term outcomes across patients undergoing a single, common neurosurgical procedure. METHODS: In this retrospective cohort study, 3988 consecutive patients undergoing single-level, posterior-only open lumbar fusion at a single, multihospital, academic medical center were enrolled over a 6-year period. Among them, 3406 patients self-identified as White, and 582 patients self-identified as Black. Outcome disparities between all White patients vs all Black patients were estimated using logistic regression. Subsequently, coarsened exact matching controlled for outcome-mitigating factors; White and Black patients were exact-matched 1:1 on key demographic and health characteristics (matched n = 1018). Primary outcomes included 30-day and 90-day hospital readmissions, emergency department (ED) visits, reoperations, mortality, discharge disposition, and intraoperative complication. RESULTS: Before matching, Black patients experienced increased rate of nonhome discharge, readmissions, ED visits, and reoperations (all P < .001). After exact matching, Black patients were less likely to be discharged to home (odds ratio [OR] 2.68, P < .001) and had higher risk of 30-day and 90-day readmissions (OR 2.24, P < .001; OR 1.91, P < .001; respectively) and ED visits (OR 1.79, P = .017; OR 2.09, P < .001). Black patients did not experience greater risk of intraoperative complication (unintentional durotomy). CONCLUSION: Between otherwise homogenous spinal fusion cohorts, Black patients experienced unfavorable short-term outcomes. These disparities were not explained by differences in intraoperative complications. Further investigation must characterize and mitigate institutional and societal factors that contribute to outcome disparities.

Determining Differences in Perioperative Functional Mobility Patterns in Lumbar Decompression Versus Fusion Patients Using Smartphone Activity Data.

BACKGROUND AND OBJECTIVES: Smartphone activity data recorded through high-fidelity accelerometry can provide accurate postoperative assessments of patient mobility. The "big data" available through smartphones allows for advanced analyses, yielding insight into patient well-being. This study compared rate of change in functional activity data between lumbar fusion (LF) and lumbar decompression (LD) patients to determine preoperative and postoperative course differences. METHODS: Twenty-three LF and 18 LD patients were retrospectively included. Activity data (steps per day) recorded in Apple Health, encompassing over 70 000 perioperative data points, was classified into 6 temporal epochs representing distinct functional states, including acute preoperative decline, immediate postoperative recovery, and postoperative decline. The daily rate of change of each patient's step counts was calculated for each perioperative epoch. RESULTS: Patients undergoing LF demonstrated steeper preoperative declines than LD patients based on the first derivative of step count data (P = .045). In the surgical recovery phase, LF patients had slower recoveries (P = .041), and LF patients experienced steeper postoperative secondary declines than LD patients did (P = .010). The rate of change of steps per day demonstrated varying perioperative trajectories that were not explained by differences in age, comorbidities, or levels operated. CONCLUSION: Patients undergoing LF and LD have distinct perioperative activity profiles characterized by the rate of change in the patient daily steps. Daily steps and their rate of change is thus a valuable metric in phenotyping patients and understanding their postsurgical outcomes. Prospective studies are needed to expand upon these data and establish causal links between preoperative patient mobility, patient characteristics, and postoperative functional outcomes.

Glutamate oxidase sheets-Prussian blue grafted amperometric biosensor for the real time monitoring of glutamate release from primary cortical neurons.

Glutamate (GLU) is a primary excitatory neurotransmitter, and its dysregulation is associated with several neurodegenerative disorders. A major challenge in GLU estimation is the existence of other biomolecules in the brain that could directly get oxidized at the electrode. Hence, highly selective electroenzymatic biosensors that enable rapid estimation of GLU are needed. Initially, a copolymer, poly(2-dimethylaminoethyl methacrylate- styrene) was synthesized through reversible addition-fragmentation chain transfer polymerization to noncovalently functionalize reduced graphene oxide (rGO), named DS-rGO. Glutamate oxidase macromolecule immobilized DS-rGO formed enzyme nanosheets, which was drop-coated over Prussian blue electrodeposited disposable electrodes to fabricate the GLU biosensor. The interconnectivity between the enzyme nanosheets and the Prussian blue endows the biosensor with enhanced conductivity and electrochemical activity. The biosensor exhibited a linearity: 3.25-250 µM; sensitivity: 3.96 µA mM-1 cm-2, and a limit of detection: 0.96 µM for GLU in the Neurobasal Medium. The biosensor was applied to an in vitro primary rat cortical model to discriminate GLU levels in Neurobasal Medium, before and after KCl mediated depolarization, which provides new insights for elucidating neuronal functioning in the brain.

Effects of Augmented Reality on Thoracolumbar Pedicle Screw Instrumentation Across Different Levels of Surgical Experience.

OBJECTIVE: Augmented reality (AR) is an emerging technology that may accelerate skill acquisition and improve accuracy of thoracolumbar pedicle screw placements. We aimed to quantify the relative assistance of AR compared with freehand (FH) pedicle screw accuracy across different surgical experience levels. METHODS: A spine fellowship-trained and board-certified attending neurosurgeon, postgraduate year 4 neurosurgery resident, and second-year medical student placed 32 FH and 32 AR-assisted thoracolumbar pedicle screws in 3 cadavers. A cableless, voice-activated AR system was paired with a headset. Accuracy was assessed using χ2 analysis and the Gertzbein-Robbins scale. Angular error, distance error, and time per pedicle screw were collected and compared. RESULTS: The attending neurosurgeon had 91.6% (11/12) clinically acceptable (Gertzbein-Robbins scale A or B) insertion in both FH and AR groups; the resident neurosurgeon had 100% (9/9) FH and AR in both cases; the medical student had 72.3% (8/11) FH accuracy and 81.8% (9/11) AR accuracy. The medical student displayed significantly lower ideal (Gertzbein-Robbins scale A) FH accuracy compared with the resident neurosurgeon (P = 0.017) and attending neurosurgeon (P = 0.005), but no difference when using AR. FH screw placement was faster by both the attending neurosurgeon (median 46 seconds vs. 94.5 seconds, P = 0.0047) and the neurosurgery resident neurosurgeon (median 144 seconds vs. 140 seconds, P = 0.05). Total clinically acceptable AR and FH accuracy was 90.6% (29/32) and 87.5% (28/32), respectively (P = 0.69). CONCLUSIONS: AR screw placement allowed an inexperienced medical student to double their accuracy in 1 training session. With subsequent iterations, this promising technology could serve as an important tool for surgical training.

Next-generation even-denominator fractional quantum Hall states of interacting composite fermions.

The discovery of the fractional quantum Hall state (FQHS) in 1982 ushered a new era of research in many-body condensed matter physics. Among the numerous FQHSs, those observed at even-denominator Landau level filling factors are of particular interest as they may host quasiparticles obeying non-Abelian statistics and be of potential use in topological quantum computing. The even-denominator FQHSs, however, are scarce and have been observed predominantly in low-disorder two-dimensional (2D) systems when an excited electron Landau level is half filled. An example is the well-studied FQHS at filling factor [Formula: see text] 5/2 which is believed to be a Bardeen-Cooper-Schrieffer-type, paired state of flux-particle composite fermions (CFs). Here, we report the observation of even-denominator FQHSs at [Formula: see text] 3/10, 3/8, and 3/4 in the lowest Landau level of an ultrahigh-quality GaAs 2D hole system, evinced by deep minima in longitudinal resistance and developing quantized Hall plateaus. Quite remarkably, these states can be interpreted as even-denominator FQHSs of CFs, emerging from pairing of higher-order CFs when a CF Landau level, rather than an electron or a hole Landau level, is half-filled. Our results affirm enhanced interaction between CFs in a hole system with significant Landau level mixing and, more generally, the pairing of CFs as a valid mechanism for even-denominator FQHSs, and suggest the realization of FQHSs with non-Abelian anyons.

Quantitative risk assessment of foodborne Salmonella illness by estimating cooking effect on eggs from retail markets.

In this study, we performed a quantitative microbial risk assessment (QMRA) of Salmonella through intake of egg consumption after cooking (dry-heat, moist-heat, and raw consumption). Egg samples (n = 201) from retail markets were analyzed for the presence of Salmonella. In addition, temperature and time were investigated during egg transit, storage, and display. A predictive model was developed to characterize the kinetic behavior of Salmonella in eggs, and data on egg consumption and frequency were collected. Eventually, the data was simulated to estimate egg-related foodborne illnesses. Salmonella was not found in any of the 201 egg samples. Thus, the estimated initial contamination level was -4.0 Log CFU/g. With R2 values of 0.898 and 0.922, the constructed predictive models were adequate for describing the fate of Salmonella in eggs throughout distribution and storage. Eggs were consumed raw (1.5%, 39.2 g), dry-heated (57.5%, 43.0 g), and moist-heated (41%, 36.1 g). The probability of foodborne Salmonella illness from the consumption of cooked eggs was evaluated to be 6.8×10-10. Additionally, the probability of foodborne illness not applied cooking methods was 1.9×10-7, indicating that Salmonella can be reduced by cooking. Therefore, the risk of Salmonella infection through consumption of eggs after cooking might be low in S. Korea.

Comparison of Staged vs Same-Day Circumferential Spinal Fusions for Adult Spinal Deformity.

BACKGROUND: Patients often undergo circumferential (anterior and posterior) spinal fusions to maximize adult spinal deformity (ASD) correction and achieve adequate fusion. Currently, such procedures are performed in staged (ST) or same-day (SD) procedures with limited evidence to support either strategy. This study aims to compare perioperative outcomes and costs of ST vs SD circumferential ASD corrective surgeries. METHODS: This is a retrospective review of patients undergoing circumferential ASD surgeries between 2013 and 2018 in a single institution. Patient characteristics, preoperative comorbidities, surgical details, perioperative complications, readmissions, total hospital admission costs, and 90-day postoperative care costs were identified. All variables were tested for differences between ST and SD groups unadjusted and after applying inverse probability weighting (IPW), and the results before and after IPW were compared. RESULTS: The entire cohort included a total of 211 (ST = 50, SD = 161) patients, 100 of whom (ST = 44, SD = 56) underwent more than 4 levels fused posteriorly and anterior lumbar interbody fusion (ALIF). Although patient characteristics and comorbidities were not dissimilar between the ST and SD groups, both the number of levels fused in ALIF and posterior spinal fusion (PSF) were significantly different. Thus, using IPW, we were able to minimize the cohort incongruities in the number of levels fused in ALIF and PSF while maintaining comparable patient characteristics. In both the whole cohort and the long segment fusions, postoperative pulmonary embolism was more common in ST procedures. After adjustment utilizing IPW, both groups were not significantly different in disposition, 30-day readmissions, and reoperations. However, within the whole cohort and the long segment fusion cohort, the ST group continued to show significantly increased rates of pulmonary embolism, longer length of stay, and higher hospital admission costs compared with the SD group. CONCLUSIONS: Adjusted comparisons between ST and SD groups showed staging associated with significantly increased length of stay, risk of pulmonary embolism, and admission costs.