ABSTRACT
The construction and precise synthesis of materials based on functional and structural orientations have emerged as a pivotal platform in the field of environmental management. In this paper, an efficient and stable catalyst (RuLDH) was constructed to achieve this goal. RuLDH comprises individual Ru atoms that are uniformly dispersed on ZnAl-LDH, achieved by room temperature stirring. Remarkably, RuLDH exhibits exceptional performance under visible light, effectively triggering the photocatalytic degradation of tetracycline hydrochloride (TC) via peroxymonosulfate (PMS) with a remarkable efficiency of 100%, all while avoiding the generation of highly toxic intermediates. In addition, RuLDH0.2 demonstrated its utility in fluorescence detection of TC, showcasing commendable analytical performance characterized by rapid response, low detection limit, and robust resistance to environmental interferences (with a detection limit of 1.0 mg/L). Notably, the RuLDH0.2/PMS/Vis system exhibited remarkable efficacy in treating actual pesticide wastewater, effectively exerting bactericidal and disinfectant effects. This study serves as a source of inspiration for the design of multifunctional single-atom catalysts, thereby pushing the boundaries of "integration of diagnosis and treatment" in environmental management and control.
Subject(s)
Disinfectants , Ruthenium , Anti-Bacterial Agents/pharmacology , Tetracycline , PeroxidesABSTRACT
Benzethonium chloride (BZC) is viewed as a promising disinfectant and widely applied in daily life. While studies related to its effect on waste activated sludge (WAS) anaerobic fermentation (AF) were seldom mentioned before. To understand how BZC affects AF of WAS, production of short chain fatty acids (SCFAs), characteristics of WAS as well as microbial community were evaluated during AF. Results manifested a dose-specific relationship of dosages between BZC and SCFAs and the optimum yield arrived at 2441.01 mg COD/L with the addition of 0.030 g/g TSS BZC. Spectral results and protein secondary structure variation indicated that BZC denatured proteins in the solid phase into smaller proteins or amino acids with unstable structures. It was also found that BZC could stimulate the extracellular polymeric substances secretion and reduce the surface tension of WAS, leading to the enhancement of solubilization. Beside, BZC promoted the hydrolysis stage (increased by 7.09 % to 0.030 g/g TSS BZC), but inhibited acetogenesis and methanogenesis stages (decreased by 6.85 % and 14.75 % to 0.030 g/g TSS BZC). The microbial community was also regulated by BZC to facilitate the enrichment of hydrolytic and acidizing microorganisms (i.e. Firmicutes). All these variations caused by BZC were conducive to the accumulation of SCFAs. The findings contributed to investigating the effect of BZC on AF of WAS and provided a new idea for the future study of AF mechanism.
Subject(s)
Benzethonium , Sewage , Fermentation , Anaerobiosis , Sewage/chemistry , Fatty Acids, Volatile , Hydrogen-Ion ConcentrationABSTRACT
A variety of variables limit the recovery of resources from anaerobic fermentation of waste activated sludge (WAS), hence pretreatment strategies are necessary to be investigated to increase its efficiency. A combination of free nitrous acid (FNA) and calcium hypochlorite [Ca(ClO)2] was employed in this investigation to significantly improve sludge fermentation performance. The yields of cumulative hydrogen for the blank and FNA treatment group were 1.09 ± 0.16 and 7.36 ± 0.21 mL/g VSS, respectively, and 6.59 ± 0.24 [0.03 g Ca(ClO)2/g TSS], 7.75 ± 0.20 (0.06), and 8.58 ± 0.22 (0.09) mL/g VSS for the Ca(ClO)2 groups. The co-treatment greatly boosted hydrogen generation, ranging from 39.97 ± 2.26 to 76.20 ± 4.78 % as compared to the solo treatment. Mechanism analysis demonstrated that the combined treatment disturbed sludge structure and cell membrane permeability even more, which released more organic substrates and enhanced biodegradability of fermentation broth. This paper describes a unique strategy to sludge pretreatment that expands the use of Ca(ClO)2 and FNA in anaerobic fermentation, with implications for sludge disposal and energy recovery.
Subject(s)
Nitrous Acid , Sewage , Sewage/chemistry , Nitrous Acid/analysis , Fatty Acids, Volatile/analysis , Fermentation , Hydrogen/analysis , AnaerobiosisABSTRACT
The pollutants in soils with different physicochemical properties usually exhibit various phytotoxicity due to their diverse environmental behavior. However, it is not clear that some components of dissolved organic matter (DOM) in soil affect the bioavailability of pollutants. In this study, the different phytotoxicity of atrazine in two different soils, black soil (BS) and yellow brown earth (YBE), to soybeen seedlings was investigated, and the potential mechanism were further discussed by examining the adsorption properties of atrazine with BS and YBE as well as the fluorescent characteristic variation of these two kinds of DOM extracted from BS and YBE during binding with atrazine. The results suggest that atrazine showed different phytotoxicity to soybean seedlings grown in BS and YBE. Specifically, the EC50 of atrazine on plant height and root length of soybean seedling in BS were 23.44 mg kg-1 and 54.29 mg kg-1, while those in YBE were 12.79 mg kg-1 and 21.48 mg kg-1. The adsorption amounts of BS and YBE was 41.56 mg kg-1 and 32.95 mg kg-1. In addition, 3D-EEM showed that humic acid-like substances were the main components of DOM in the two soils. With the increase of atrazine concentration, the fluorescence of these two kind of DOM was gradually quenched, but DOM-BS had a faster quenching rate. FT-IR showed that DOM-BS contained more polysaccharides and richer lipophilic groups. Meanwhile, the results of PARAFAC found that DOM-BS was easier to combine with atrazine. The findings of this study are significant to reveal phytotoxicity of atrazine in BS and YBE. The above results are helpful to better understand the components of DOM in different soils and their different role in regulating the environmental behavior and phytotoxicity of organic pollutants.
Subject(s)
Atrazine , Soil Pollutants , Adsorption , Atrazine/toxicity , Humic Substances/analysis , Soil , Soil Pollutants/analysis , Soil Pollutants/toxicity , Glycine max , Spectroscopy, Fourier Transform InfraredABSTRACT
Objective: To evaluate the effectiveness of distal femoral osteotomy aided by three-dimensional (3D) printing cutting block for correction of vaglus knee with osteoarthritis. Methods: Between January 2014 and January 2016, 12 patients (15 knees) with vaglus deformity and lateral osteoarhritis underwent medial closing wedge distal femoral osteotomy. There were 5 males and 7 females, aged 30-60 years (mean, 43.8 years). The mean disease duration was 6.6 years (range, 1-12 years). The unilateral knee was involved in 9 cases and bilateral knees in 3 cases. According to Koshino's staging system, 1 knee was classified as stage I, 9 knees as stage II, and 5 knees as stage III. The X-ray films of bilateral lower extremities showed that the femorotibial angle (FTA) and anatomical lateral distal femoral angle (aLDFA) were (160.40±2.69)° and (64.20±2.11)° respectively. Mimics software was used to design and print the cutting block by 3D printing technique. During operation, the best location of distal femoral osteotomy was determined according to the cutting block. After osteotomy, internal fixation was performed using a steel plate and screws. Results: All incisions healed primarily; no complication of infection or deep vein thrombosis was observed. All patients were followed up 6-18 month (mean, 12.2 months). At 6 months after operation, the hospital for special surgery (HSS) score for knee was significantly improved to 89.07±2.49 when compared with preoperative score (65.27±1.49, t=-28.31, P=0.00); the results were excellent in 10 knees, good in 4 knees, and fair in 1 knee with an excellent and good rate of 93.3%. The bony union time was 2.9-4.8 months (mean, 3.3 months). Bone delayed union occurred in 1 case (1 knee). The postoperative FTA and aLDFA were (174.00±1.41)° and (81.87±1.06)° respectively, showing significant differences when compared with preoperative ones ( t=-18.26ï¼ P=0.00; t=-25.19, P=0.00). The percentage of medial tibial plateau in whole tibial plateau was 49.78%±0.59%, showing no significant difference when compared with intraoperative measurement (49.82%±0.77%, t=0.14, P=0.89). Conclusion: 3D printing cutting block can greatly improve the accuracy of distal femoral osteotomy, and ensure better effectiveness for correction of vaglus knee with osteoarthritis.