Development and Evaluation of Docetaxel-Phospholipid Complex Loaded Self-Microemulsifying Drug Delivery System: Optimization and In Vitro/Ex Vivo Studies.

Docetaxel (DTX) has clinical efficacy in the treatment of breast cancer, but it is difficult to develop a product for oral administration, due to low solubility and permeability. This study focused on preparing a self-microemulsifying drug delivery system (SME) loaded with DTX-phospholipid complex (DTX@PLC), to improve the dissolution and gastrointestinal (GI) permeability of DTX. A dual technique combining the phospholipid complexation and SME formulation described as improving upon the disadvantages of DTX has been proposed. We hypothesized that the complexation of DTX with phospholipids can improve the lipophilicity of DTX, thereby increasing the affinity of the drug to the cell lipid membrane, and simultaneously improving permeability through the GI barrier. Meanwhile, DTX@PLC-loaded SME (DTX@PLC-SME) increases the dissolution and surface area of DTX by forming a microemulsion in the intestinal fluid, providing sufficient opportunity for the drug to contact the GI membrane. First, we prepared DTX@PLC-SME by combining dual technologies, which are advantages for oral absorption. Next, we optimized DTX@PLC-SME with nanosized droplets (117.1 nm), low precipitation (8.9%), and high solubility (33.0 mg/g), which formed a homogeneous microemulsion in the aqueous phase. Dissolution and cellular uptake studies demonstrated that DTX@PLC-SME showed 5.6-fold higher dissolution and 2.3-fold higher DTX uptake in Caco-2 cells than raw material. In addition, an ex vivo gut sac study confirmed that DTX@PLC-SME improved GI permeability of DTX by 2.6-fold compared to raw material. These results suggested that DTX@PLC-SME can significantly overcome the disadvantages of anticancer agents, such as low solubility and permeability.

Surface-modified gemcitabine with mucoadhesive polymer for oral delivery.

Gemcitabine microparticles were prepared using chitosan, polyethylene oxide or carbopol as the mucoadhesive polymer and eudragit L100-55 as the enteric polymer by a double emulsion method. The particle size and zeta potential changed from 1338.3 ± 254.1 nm to 2459.4 ± 103.6 nm and -5.16 ± 1.62 mV to 2.84 ± 0.65 mV, respectively, with increasing chitosan to gemcitabine weight ratio from 0.25 to 1. The gemcitabine-loaded microparticles without mucoadhesive polymer (F50) showed the particle size and zeta potential of 671.3 ± 58.3 nm and - 16.7 ± 1.82 mV, respectively. The cellular uptake of gemcitabine into Caco-2 cells from gemcitabine-loaded microparticles with chitosan increased with increasing incubation time in Caco-2 cells compared to that of gemcitabine-loaded microparticles with polyethylene oxide or carbopol, suggesting that chitosan might be the optimal mucoadhesive polymer. Gemcitabine microparticles will be tested to identify whether the oral absorption could be increased in the future.

Preparation and evaluation of polymeric microparticulates for improving cellular uptake of gemcitabine.

BACKGROUND: Gemcitabine must be administered at high doses to elicit the required therapeutic response because of its very short plasma half-life due to rapid metabolism. These high doses can have severe adverse effects. METHODS: In this study, polymeric microparticulate systems of gemcitabine were prepared using chitosan as a mucoadhesive polymer and Eudragit L100-55 as an enteric copolymer. The physicochemical and biopharmaceutical properties of the resulting systems were then evaluated. RESULTS: There was no endothermic peak for gemcitabine in any of the polymeric gemcitabine microparticulate systems, suggesting that gemcitabine was bound to chitosan and Eudragit L100-55 and its crystallinity was changed into an amorphous form. The polymeric gemcitabine microparticulate system showed more than 80% release of gemcitabine in 30 minutes in simulated intestinal fluid. When mucin particles were incubated with gemcitabine polymeric microparticulates, the zeta potential of the mucin particles was increased to 1.57 mV, indicating that the polymeric gemcitabine microparticulates were attached to the mucin particles. Furthermore, the F53 polymeric gemcitabine microparticulates having 150 mg of chitosan showed a 3.8-fold increased uptake of gemcitabine into Caco-2 cells over 72 hours compared with gemcitabine solution alone. CONCLUSION: Overall, these results suggest that polymeric gemcitabine microparticulate systems could be used as carriers to help oral absorption of gemcitabine.

Xanthohumol inhibits IL-12 production and reduces chronic allergic contact dermatitis.

Xanthohumol (XN) and its related compounds were evaluated for their effects on modulating the production of interleukin (IL)-12, the most important factor driving T helper 1 immune responses. XN showed the strongest inhibitory effect on IL-12 production in macrophages stimulated by lipopolysaccharide (LPS) or LPS/interferon-gamma. Xanthohumol 4'-O-beta-D-glucopyranoside (XNG) inhibited IL-12 production less effectively than XN. Isoxanthohumol and 8-prenylnaringenin showed comparatively lower inhibitory effects on IL-12 production than XNG. (2S)-5-methoxy-8-prenylnaringenin 7-O-beta-D-glucopyranoside did not exert any effect on IL-12 production. We then tested how these compounds affected NF-kappaB binding activity to the kappaB site in the nucleus. The compounds inhibited kappaB binding in macrophages with the same potency order as IL-12 inhibition. Furthermore, we investigated whether XN, which showed the most effective reduction of IL-12 production, attenuated skin inflammation. Chronic allergic contact dermatitis, an experimental model for psoriasis, was used to determine the anti-inflammatory effects of XN in vivo. XN treatment reduced the degree of ear thickening induced by oxazolone. Taken together, XN might be effective as an anti-inflammatory agent to reduce skin inflammation by inhibiting IL-12 production.

Effect of applying modes of the polymer microneedle-roller on the permeation of L-ascorbic acid in rats.

Despite the advantages of drug delivery through skin, transdermal drug delivery is only used with a small subset of drugs because most compounds cannot cross the skin at therapeutically useful rates. Recently, a new concept known as microneedle was introduced and could be used to pierce effectively to deliver drugs using micron-sized needles in a minimally invasive and painless manner. In this study, the polymer microneedle-roller was fabricated so that it can be applied into the permeation of L-ascorbic acid. Moreover, a recent publication suggested the possibility of ascorbic acid 2-phosphate as a hair restorer; hence, this study was carried out to check the effect of L-ascorbic acid itself on the hair growing rate in rats according to the presence of various application frequencies of the polymer microneedle-roller. When the polymer microneedle-roller was applied nine times with four directions into rat's shaved skin, the permeation of L-ascorbic acid increased by 10.54-fold compared to that of the absence of the polymer microneedle-roller. The histological examination revealed that the skin pretreated with various application frequencies of the polymer microneedle-roller had more transport pathways. The faster hair growing phenomenon was observed in the presence of polymer microneedle-roller compared to the absence of the polymer microneedle-roller.

Studies on the formation of hydrophobic ion-pairing complex of alendronate.

A hydrophobic ion-pairing (HIP) concept considering the high dissociation property of alendronate was used as a strategy to improve the bioavailability of alendronate. Alendronate, which has a negative charge, was ion-paired with organic cations, such as tetraheptylammonium bromide (THAB) or tetrabutylammonium iodide (TBAI), to confer hydrophobicity to alendronate, and increase its intestinal permeability. Solutions containing various concentrations (0.5 to 100 mM) of organic cations were combined with an alendronate solution (5 mM) at molar ratios from 0.1:1 to 20:1 under various pHs (pH 2.2, 6.3 and 10.3). Alendronate exhibited high hydrophobicity when coupled with THAB at a molar ratio of 1:10 in pH 2.2. On the other hand, HIP complexes between alendronate and TBAI showed the maximum hydrophobicity at the same molar ratio at pH 10.3. The zeta potentials of alendronate from the aqueous layer of the HIP complex between alendronate and THAB or TBAI increased gradually with increasing alendronate to THAB molar ratio at pH 2.2 or pH 10.3, respectively. This is the first report of the production of hydrophobic ion-paired alendronate.