In situ construction of A-site high-entropy perovskites with interfacial CeO2 for a high-performance IT-SOFC air-electrode.

Developing an intermediate-temperature solid oxide fuel cell (IT-SOFC) is one of the most promising ways of achieving carbon neutrality, but its air-electrode is restricted by the conflict between the sluggish catalytic activity and durability. Herein, an A-site high-entropy perovskite composite La0.2Ba0.2Sr0.2Ca0.2Ce0.2-xCoO3-δ-xCeO2 (LBSCCC-CeO2) air-electrode material is fabricated via a one-step self-constructing strategy, which shows excellent oxygen reduction activity and stability due to the high-entropy structure and the synergy effect between LBSCCC and interfacial CeO2. This work provides a new way of fabricating high-performance air-electrodes in IT-SOFCs.

Three-dimensional evaluation of condylar morphology after orthodontic treatment in adult patients with Class II malocclusion by cone-beam computed tomography.

BACKGROUND: The aim of this study was to evaluate the condylar morphological changes after orthodontic treatment in adult patients with Class II malocclusion using a Cone-beam computed tomography (CBCT). METHODS: Images of twenty-eight adult patients with Class II malocclusion who have no temporomandibular symptoms were involved in this study. To analyze the post-treatment changes in condylar morphology, mimics 17.0 software was used to measure several values and reconstruct the three-dimensional condyle, including height of the condyle, area and bone mineral density of the maximum axial and sagittal section, volume and bone mineral density of the three-dimensional condyle and condylar head before and after orthodontic treatment. Using SPSS 19.0 software package Paired t-test was applied for comparison of condylar morphology analysis between pre-treatment and post-treatment. RESULTS: Height of condylar head increase significant (P < .05). Bone mineral density showed a decrease in the maximum axial and sagittal section, three-dimensional condyle and condylar head (P < .01). Evaluation of volume revealed that volume of both condyle and condylar head decrease considerably (P < .05). No significant difference was detected in other values ((P > .05). CONCLUSION: Condylar volume decreased and height of condylar head have changed, so we speculated that adaptive bone remodeling of the condyle occurs.

Surface modulation for highly efficient and stable perovskite solar cells.

Defects formed by halide ion escape and wettability of the perovskite absorber are essential limiting factors in achieving high performance of perovskite solar cells (PSCs). Herein, a series of ionic organic modulators are designed to contain halide anions to prevent defect formation and improve the surface tension of the perovskite absorber. It was found that the surface modulator containing Br anions is the most effective one due to its capability in bonding with the undercoordinated Pb2+ ions to reduce charge recombination. Moreover, this surface modulator effectively creates a suitable energy level between the perovskite and hole transport layer to promote carrier transfer. In addition, the surface modulator forms a chemisorbed capping layer on the perovskite surface to improve its hydrophobicity. As a result, the efficiency of PSCs based on surface modulators containing Br anion enhances to 23.32% from 21.08% of the control device. The efficiency of unencapsulated PSCs with a surface modulator retains 75.42% of its initial value under about 35% humidity stored in the air for 28 days, while the control device only maintained 44.49% of its initial efficiency. The excellent stability originates from the hydrophobic perovskite surface after capping the surface modulator.

Dysregulation of MicroRNA-152-3p is Associated with the Pathogenesis of Pulpitis by Modulating SMAD5.

PURPOSE: To research the role of microRNA (miR)-152 in the pathogenesis of pulpitis using a cell model based on human dental pulp cells (HDPCs) treated with lipopolysaccharides (LPS). MATERIALS AND METHODS: The biological activity of HDPCs infected by LPS was measured using a cell counting kit (CCK-8), Transwell test, flow cytometry, and fluorescent quantitative PCR. The concentration of superoxide dismutase (SOD) and malondialdehyde (MDA) was evaluated using an assay kit, the levels of interleukin (IL)-1ß and IL-6 were measured by enzyme-linked immunosorbent assay (ELISA), and the targeting relationship between SMAD5 and miR-152 was measured by the double-luciferase report test. The expression of cell cycle-related CyclinD1 and BAX was assessed by PCR. By plotting a receiver operating characteristic (ROC) curve, the diagnostic value of miR-152 was shown. RESULTS: The level of miR-152 in HDPCs induced by LPS decreased, while the level of SMAD5 increased. After overexpressing miR-152 in LPS-induced HDPCs, the viability was elevated, the apoptosis rate decreased, CyclinD1 was elevated, BAX diminished, the inflammatory cytokines (IL-6 and IL-1ß) were inhibited, the activity of SOD increased, and the MDA content decreased. miR-152 targeted regulation of SMAD5, and SMAD5 modulated the effects of miR-152 on cell viability, apoptosis, inflammation, and the oxidative response of HDPCs. Reduced miR-152 expression was verified in patients with pulpitis, which could be a biomarker for pulpitis. CONCLUSION: miR-152 was found to be a biomarker correlated with the pathogenesis of pulpitis and the biological behaviour of HDPCs.

d-NH2-MIL-125 doped with Cu NPs for light-driven hydrogen evolution.

Herein, we created defects on NH2-MIL-125 to form more nodes of grafted metals, and synthesized a series of hybrid materials (Cu/d-NH2-MIL-125 and CuNPs/d-NH2-MIL-125 with 1,2, and 4 wt % of Cu nanoparticles) that were used as photocatalysts of the hydrogen evolution reaction and dehydrogenation of tetrahydroisoquinoline. At the optimal relative amount of Cu, namely 2 wt %, the hydrogen evolution reaction and dehydrogenation of tetrahydroisoquinoline showed rates of 1326.55 µmol g-1 h-1 and 427.15 µmol g-1 h-1, respectively. This new photocatalyst could effectively improve the e-/h+ separation efficiency, enriching the investigation of MOFs in the field of photocatalytic hydrogen evolution.

Surface Engineering of TiO2 Nanosheets to Boost Photocatalytic Methanol Dehydrogenation for Hydrogen Evolution.

Low-cost high-efficiency H2 evolution is indispensable for its large-scale applications in the future. In the research, we expect to build high active photocatalysts for sunlight-driven H2 production by surface engineering to adjust the work function of photocatalyst surfaces, adsorption/desorption ability of substrates and products, and reaction activation energy barrier. Single-atom Pt-doped TiO2-x nanosheets (NSs), mainly including two facets of (001) and (101), with loading of Pt nanoparticles (NPs) at their edges (Pt/TiO2-x-SAP) are successfully prepared by an oxygen vacancy-engaged synthetic strategy. According to the theoretical simulation, the implanted single-atom Pt can change the surface work function of TiO2, which benefits electron transfer, and electrons tend to gather at Pt NPs adsorbed at (101) facet-related edges of TiO2 NSs for H2 evolution. Pt/TiO2-x-SAP exhibits ultrahigh photocatalytic performance of hydrogen evolution from dry methanol with a quantum yield of 90.8% that is ∼1385 times higher than pure TiO2-x NSs upon 365 nm light irradiation. The high H2 generation rate (607 mmol gcata-1 h-1) of Pt/TiO2-x-SAP is the basis for its potential applications in the transportation field with irradiation of UV-visible light (100 mW cm-2). Finally, lower adsorption energy for HCHO on Ti sites originated from TiO2 (001) doping single-atom Pt is responsible for high selective dehydrogenation of methanol to HCHO, and H tends to favorably gather at Pt NPs on the TiO2 (101) surface to produce H2.

Deep learning-based prediction of mandibular growth trend in children with anterior crossbite using cephalometric radiographs.

BACKGROUND: It is difficult for orthodontists to accurately predict the growth trend of the mandible in children with anterior crossbite. This study aims to develop a deep learning model to automatically predict the mandibular growth result into normal or overdeveloped using cephalometric radiographs. METHODS: A deep convolutional neural network (CNN) model was constructed based on the algorithm ResNet50 and trained on the basis of 256 cephalometric radiographs. The prediction behavior of the model was tested on 40 cephalograms and visualized by equipped with Grad-CAM. The prediction performance of the CNN model was compared with that of three junior orthodontists. RESULTS: The deep-learning model showed a good prediction accuracy about 85%, much higher when compared with the 54.2% of the junior orthodontists. The sensitivity and specificity of the model was 0.95 and 0.75 respectively, higher than that of the junior orthodontists (0.62 and 0.47 respectively). The area under the curve value of the deep-learning model was 0.9775. Visual inspection showed that the model mainly focused on the characteristics of special regions including chin, lower edge of the mandible, incisor teeth, airway and condyle to conduct the prediction. CONCLUSIONS: The deep-learning CNN model could predict the growth trend of the mandible in anterior crossbite children with relatively high accuracy using cephalometric images. The deep learning model made the prediction decision mainly by identifying the characteristics of the regions of chin, lower edge of the mandible, incisor teeth area, airway and condyle in cephalometric images.

A double perovskite participation for promoting stability and performance of Carbon-Based CsPbI2Br perovskite solar cells.

All-inorganic perovskite materials (Typically: CsPbI2Br) have attracted enormous attention due to their illustrious thermal stability and appropriate bandgap, and their use in perovskite solar cells (PSCs) has been extensively investigated. However, the inevitable defects of the perovskite layer, energy level mismatch between perovskite and carbon electrodes, and the phase instability of CsPbI2Br limit the power conversion efficiency (PCE) and stability of carbon-based CsPbI2Br PSCs. Herein, we demonstrate a simple and effective strategy for regulating energy level, inhibiting carrier recombination, and delaying the degradation of perovskite by modifying the surface of CsPbI2Br with a new type of 2D perovskite Cs2PtI6. The carbon-based CsPbI2Br PSCs achieve a higher PCE (13.69 %) than the control device (11.10 %). The excellent matching of the energy level and suppression of charge carrier recombination should be responsible for the improvement in efficiency. Furthermore, the excellent hydrophobic performance of Cs2PtI6 enhances the moisture resistance of the device. This study provides a potential strategy for improving the performance and stability of all-inorganic CsPbI2Br PSCs.

Hierarchically Porous Metal-Organic Framework/MoS2 Interface for Selective Photocatalytic Conversion of CO2 with H2 O into CH3 COOH.

Metal-organic frameworks (MOFs) provide a platform to design new heterogeneous catalysts for catalytic CO2 reduction, but selective formation of C2 valuable liquid fuel products remains a challenge. Herein, we propose a strategy to synthesize composites by integrating MoS2 nanosheets into hierarchically porous defective UiO-66 (d-UiO-66) to form Mo-O-Zr bimetallic sites on the interfaces between UiO-66 and MoS2 . The active interfaces are favorable for the efficient transfer of photo-generated charge carriers and for promoting the activity, whereas, the synergy of the components at the interfaces achieves selectivity for C2 production. The d-UiO-66/MoS2 composite facilitates the photo-catalytic conversion of gas phase CO2 and H2 O to CH3 COOH under visible light irradiation without any other adducts. The evolution rate and selectivity of CH3 COOH reached 39.0 µmol g-1 h-1 and 94 %, respectively, without any C1 products, suggesting a new approach for the design of highly efficient photocatalysts of CO2 for C2 production. Theoretical calculations demonstrate the charge-polarized Zr-O-Mo aided the C-C coupling process with the largely reduced energy barrier.

Carrier Transport Layer-Free Perovskite Solar Cells.

Power conversion efficiencies (PCEs) of up to 25.5 % have been reported for perovskite solar cells (PSCs). Thus, they have shown great potential for commercial applications. Therefore, simplifying technological process and reducing production costs have been a widespread concern among scientific and industrial communities. In this study, PSCs are prepared with the simplest device architecture (FTO/MAPbI3 /carbon). A high-quality perovskite film with few interface defects and good carrier transport is obtained by tuning the p-n properties, matching energy levels, and enhancing carrier collection and transport. A PCE of 12.01 % is achieved, which is the best reported to date for this device structure. The device also shows excellent long-term stability, owing to the elimination of charge transport layers and the usage of hydrophobic materials. This study provides a new approach to reduce production costs and simplify production of PSCs.

Cu Nanocluster-Loaded TiO2 Nanosheets for Highly Efficient Generation of CO-Free Hydrogen by Selective Photocatalytic Dehydrogenation of Methanol to Formaldehyde.

Safe storage and transportation of H2 is a fundamental requirement for its wide applications in the future. Controllable release of high-purity H2 from a stable storage medium such as CH3OH before use offers an efficient way of achieving this purpose. In our case, Cu nanoclusters uniformly dispersed onto (001) surfaces of TiO2 nanosheets (TiO2/Cu) are selectively prepared by thermal treatment of HKUST-1 loaded TiO2 nanosheets. One of the TiO2/Cu composites, TiO2/Cu_50, exhibits remarkably high activity toward the selective dehydrogenation of CH3OH to HCHO with a H2 evolution rate of 17.8 mmol h-1 per gram of catalyst within a 16-h photocatalytic reaction (quantum efficiency at 365 nm: 16.4%). Theoretical calculations reveal that interactions of Cu nanoclusters with TiO2 could affect their electronic structures, leading to higher adsorption energy of CH3OH at Ti sites and a lower barrier for the dehydrogenation of CH3OH by the synergistic effect of Cu nanoclusters and TiO2, and lower Gibbs free energy for desorption HCHO and H2 as well.

A new natural hybrid of Iris (Iridaceae) from Chongqing, China.

A newly discovered natural hybrid, Iris×ampliflora Y.E. Xiao, F.Y. Yu & X.F. Chen (Iridaceae: subgenus LimnirissectionLophiris) from Chongqing, China, is described and illustrated. This hybrid is morphologically similar to I.japonica Thunb. and I.wattii Baker, but can be distinguished by its giant leaves and large purple flowers. Phylogenetic trees based on cpDNA data support the separation of I.×ampliflora from other closely related species in the section Lophiris. According to its morphological features, molecular systematic evidence and chromosome data, we speculate that I.×ampliflora [31 chromosomes] likely is a new hybrid between I.japonica [2n = 32] and I.wattii [2n = 30].

Comparison of the effects of rapid maxillary expansion versus Twin Block appliance on mandibular growth in skeletal Class II patients.

BACKGROUND: This is a retrospective study that compares mandibular growth changes in skeletal Class II patients treated by rapid maxillary expansion (RME) and following fixed appliance with those patients treated by Twin-Block (TB) and following fixed appliance. METHODS: Fourteen patients treated by RME and following fixed appliance were included into the RME group. Fifteen patients treated by Twin-Block and following fixed appliance were included into the TB group. Lateral cephalometric radiographs taken before treatment and immediately after fixed appliance treatment were used to evaluate mandibular growth effects. RESULTS: The starting forms of the patients in the two groups were examined to be of good comparability. The mandibular length increased significantly in both groups as measured by Co-Gn, Go-Gn and Ar-Gn, but the TB group didn't show more mandibular growth than the RME group (P > 0.05). Skeletal changes of the mandible in vertical dimension were different in the two groups. The change in FMA was 0.35° in the RME group, while the change was 2.65° in the TB group (P < 0.001). The change in LAFH was 5.14 mm in the RME group, significantly smaller than the change of 10.19 mm in the TB group (P < 0.001). CONCLUSION: The investigated Phase I treatment with RME followed by Phase II treatment of fixed appliance achieved the same increases in sagittal mandibular growth and facial profile improvements as the Twin-Block therapy. The treatment with RME followed by fixed appliance was better for vertical control, while the treatment with Twin-Block followed by fixed appliance significantly increased the mandibular plane angle.

Novel Lead-Free Material Cs2PtI6 with Narrow Bandgap and Ultra-Stability for Its Photovoltaic Application.

Lead halide perovskite has in recent years gained widespread interest due to its excellent physical and chemical properties, as well as superior optoelectronic performance. However, some restrictions still preclude full industrialization of the material, in particular toxicity issues and instability as a result to sensitivity to humidity. Lead-free all-inorganic double perovskite materials have thus recently become a focus of research. Herein, a new narrow bandgap lead-free double perovskite solar cell with a high-quality Cs2PtI6 film is proposed. It exhibits an optical bandgap of 1.37 eV, absorption within a wide range of wavelengths, and a high absorption coefficient. Following optimization, the device displays a best power conversion efficiency of 0.72% with an open-circuit voltage of 0.73 V, a short-circuit current of 1.2 mA/cm2, and a fill factor of 0.82. Crucially, it also demonstrates excellent stability when exposed to extreme conditions such as high humidity, high temperature, and UV-light irradiation. Stability tests show that the PSCs can retain almost 80% of the original efficiency over 60 days stored in ambient temperature without any encapsulation, boosting prospects for applications of lead-free perovskite solar cells.

Excellent Moisture Stability and Efficiency of Inverted All-Inorganic CsPbIBr2 Perovskite Solar Cells through Molecule Interface Engineering.

All-inorganic lead halide perovskite solar cells (PSCs) have drawn widespread interest because of its excellent thermal stability compared to its organic-inorganic hybrid counterpart. Poor phase stability caused by moisture, however, has thus far limited their commercial application. Herein, by modifying the interface between the hole-transport layer (HTL) and the perovskite light absorption layer, and by optimizing the HTL for better energy alignment, we controlled the growth of perovskite, reduced carrier recombination, facilitated carrier injection and transport, and improved the PSC's power conversion efficiency (PCE) and moisture stability. When testing using a positive bias scan, we obtained a significant improvement in PCE, 9.49%, which is the champion efficiency of CsPbIBr2-based inverted PSC at present. The stability measurement shows that the passivated CsPbIBr2-based inverted PSCs can retain 86% of its initial efficiency after 1000 h preserved in ambient air with 65% relative humidity. This study paves a new way for enhancing the moisture stability and power conversion efficiency of CsPbIBr2-based PSCs.

N-CND modified NH2-UiO-66 for photocatalytic CO2 conversion under visible light by a photo-induced electron transfer process.

A N-CNDs/NH2-UiO-66 composite is successfully prepared by introducing N-CNDs into the synthetic system of NH2-UiO-66. Excited electrons in the LUMO of the N-CNDs are smoothly transferred to Zr4+ of NH2-UiO-66 upon visible light irradiation. The composite exhibits enhanced photocatalytic performance for CO2 reduction in an acetonitrile/ethanol mixture via the PET process.

Induced ankylosis of primary canines for absolute anchorage in the treatment of a patient with Class III malocclusion and cleft soft palate.

This case report describes the induced ankylosis of the primary canines for use as absolute anchorage for maxillary protraction. The patient was a young boy with Class III malocclusion and cleft soft palate. The final occlusion was esthetic, functional, healthy, and stable 4 years after treatment.

Effectiveness of oral appliances versus continuous positive airway pressure in treatment of OSA patients: An updated meta-analysis.

Objective: To update the meta-analysis comparing the effectiveness of oral appliance (OA) with continuous positive airway pressure (CPAP) in treating patients with obstructive sleep apnea (OSA). Methods: PubMed, ISI Web of Knowledge, Ovid, EBSCO Dentistry & Oral Science Source, The Cochrane Library, and Embase database were searched for RCTs until 23 May 2017. Meta-analyses were performed using RevMan 5.3. Results: Sixteen RCTs were included. Compared with OA, CPAP significantly decreased AHI, min SaO2, ARI, ESS (p < 0.05), with no significant difference in REM%, FOSQ, BP (p ≥ 0.05). OA significantly improved REM% in the severe groups and ESS in the adjustable OA group (p < 0.05). OA shared greater preference. Conclusion: Even though CPAP can better decrease the severity of OSA, more patients opted for OA, which showed better results in severe patients, especially adjustable OA.

Fabrication of a High-Quality Cu2ZnSn(S,Se)4 Absorber Layer via an Aqueous Solution Process and Application in Solar Cells.

The development of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells determines the prospect of thin-film photovoltaic devices because of some of their strengths. However, the usual solution fabrication processes of CZTSSe absorbing layers are either too tedious or highly toxic. Here, we have developed an alternative strategy to prepare kesterite CZTSSe absorber films with a simple and low-toxicity solution process by replacing the commonly employed thiol-based compounds using the glycolic acid aqueous solution, which significantly reduces the environment pollution and toxicity, providing a possibility toward the green solvent process. The power conversion efficiency of 6.81% has been acquired based the aqueous solution-processed CZTSSe thin film via optimizing the fabrication technology.