A rapid assay provides on-site quantification of tetrahydrocannabinol in oral fluid.

Tetrahydrocannabinol (THC), the primary psychoactive ingredient of cannabis, impairs cognitive and motor function in a concentration-dependent fashion. Drug testing is commonly performed for employment and law enforcement purposes; however, available tests produce low-sensitive binary results (lateral flow assays) or have long turnaround (gas chromatography­mass spectrometry). To enable on-site THC quantification in minutes, we developed a rapid assay for oral THC analysis called EPOCH (express probe for on-site cannabis inhalation). EPOCH features distinctive sensor design such as a radial membrane and transmission optics, all contained in a compact cartridge. This integrated approach permitted assay completion within 5 min with a detection limit of 0.17 ng/ml THC, which is below the regulatory guideline (1 ng/ml). As a proof of concept for field testing, we applied EPOCH to assess oral fluid samples from cannabis users (n = 43) and controls (n = 43). EPOCH detected oral THC in all specimens from cannabis smokers (median concentration, 478 ng/ml) and THC-infused food consumers. Longitudinal monitoring showed a fast drop in THC concentrations within the first 6 hours of cannabis smoking (half-life, 1.4 hours).

Kaleidoscopic fluorescent arrays for machine-learning-based point-of-care chemical sensing.

Multiplexed analysis allows simultaneous measurements of multiple targets, improving the detection sensitivity and accuracy. However, highly multiplexed analysis has been challenging for point-of-care (POC) sensing, which requires a simple, portable, robust, and affordable detection system. In this work, we developed paper-based POC sensing arrays consisting of kaleidoscopic fluorescent compounds. Using an indolizine structure as a fluorescent core skeleton, named Kaleidolizine (KIz), a library of 75 different fluorescent KIz derivatives were designed and synthesized. These KIz derivatives are simultaneously excited by a single ultraviolet (UV) light source and emit diverse fluorescence colors and intensities. For multiplexed POC sensing system, fluorescent compounds array on cellulose paper was prepared and the pattern of fluorescence changes of KIz on array were specific to target chemicals adsorbed on that paper. Furthermore, we developed a machine-learning algorithm for automated, rapid analysis of color and intensity changes of individual sensing arrays. We showed that the paper sensor arrays could differentiate 35 different volatile organic compounds using a smartphone-based handheld detection system. Powered by the custom-developed machine-learning algorithm, we achieved the detection accuracy of 97% in the VOC detection. The highly multiplexed paper sensor could have favorable applications for monitoring a broad-range of environmental toxins, heavy metals, explosives, pathogens.

Fast detection of SARS-CoV-2 RNA via the integration of plasmonic thermocycling and fluorescence detection in a portable device.

The diagnosis of severe acute respiratory syndrome 2 (SARS-CoV-2) infection by quantitative PCR with reverse transcription (RT-qPCR) typically involves bulky instrumentation in centralized laboratories and an assay time of 1-2 h. Here, we show that SARS-CoV-2 RNA can be detected in 17 min via a portable device integrating reverse transcription, fast thermocycling (via plasmonic heating through magneto-plasmonic nanoparticles) and in situ fluorescence detection following magnetic clearance of the nanoparticles. The device correctly classified all nasopharyngeal, oropharyngeal and sputum samples from 75 patients with COVID-19 and 75 healthy controls, with good concordance in fluorescence intensity with standard RT-qPCR (Pearson coefficients > 0.7 for the N1, N2 and RPP30 genes). Fast, portable and automated nucleic acid detection should facilitate testing at the point of care.

Computational Optics Enables Breast Cancer Profiling in Point-of-Care Settings.

The global burden of cancer, severe diagnostic bottlenecks in underserved regions, and underfunded health care systems are fueling the need for inexpensive, rapid, and treatment-informative diagnostics. On the basis of advances in computational optics and deep learning, we have developed a low-cost digital system, termed AIDA (artificial intelligence diffraction analysis), for breast cancer diagnosis of fine needle aspirates. Here, we show high accuracy (>90%) in (i) recognizing cells directly from diffraction patterns and (ii) classifying breast cancer types using deep-learning-based analysis of sample aspirates. The image algorithm is fast, enabling cellular analyses at high throughput (∼3 s per 1000 cells), and the unsupervised processing allows use by lower skill health care workers. AIDA can perform quantitative molecular profiling on individual cells, revealing intratumor molecular heterogeneity, and has the potential to improve cancer diagnosis and treatment. The system could be further developed for other cancers and thus find widespread use in global health.

Quantitative analysis of focal adhesion dynamics using photonic resonator outcoupler microscopy (PROM).

Focal adhesions are critical cell membrane components that regulate adhesion and migration and have cluster dimensions that correlate closely with adhesion engagement and migration speed. We utilized a label-free approach for dynamic, long-term, quantitative imaging of cell-surface interactions called photonic resonator outcoupler microscopy (PROM) in which membrane-associated protein aggregates outcoupled photons from the resonant evanescent field of a photonic crystal biosensor, resulting in a highly localized reduction of the reflected light intensity. By mapping the changes in the resonant reflected peak intensity from the biosensor surface, we demonstrate the ability of PROM to detect focal adhesion dimensions. Similar spatial distributions can be observed between PROM images and fluorescence-labeled images of focal adhesion areas in dental epithelial stem cells. In particular, we demonstrate that cell-surface contacts and focal adhesion formation can be imaged by two orthogonal label-free modalities in PROM simultaneously, providing a general-purpose tool for kinetic, high axial-resolution monitoring of cell interactions with basement membranes.

Mobile Platform for Multiplexed Detection and Differentiation of Disease-Specific Nucleic Acid Sequences, Using Microfluidic Loop-Mediated Isothermal Amplification and Smartphone Detection.

New tools are needed to enable rapid detection, identification, and reporting of infectious viral and microbial pathogens in a wide variety of point-of-care applications that impact human and animal health. We report the design, construction, and characterization of a platform for multiplexed analysis of disease-specific DNA sequences that utilizes a smartphone camera as the sensor in conjunction with a hand-held "cradle" that interfaces the phone with a silicon-based microfluidic chip embedded within a credit-card-sized cartridge. Utilizing specific nucleic acid sequences for four equine respiratory pathogens as representative examples, we demonstrated the ability of the system to utilize a single 15 µL droplet of test sample to perform selective positive/negative determination of target sequences, including integrated experimental controls, in approximately 30 min. Our approach utilizes loop-mediated isothermal amplification (LAMP) reagents predeposited into distinct lanes of the microfluidic chip, which when exposed to target nucleic acid sequences from the test sample, generates fluorescent products that when excited by appropriately selected light emitting diodes (LEDs), are visualized and automatically analyzed by a software application running on the smartphone microprocessor. The system achieves detection limits comparable to those obtained by laboratory-based methods and instruments. Assay information is combined with the information from the cartridge and the patient to populate a cloud-based database for epidemiological reporting of test results.

Solution-Assembled Blends of Regioregularity-Controlled Polythiophenes for Coexistence of Mechanical Resilience and Electronic Performance.

Considering all the potential applications of organic electronics in portable, wearable, and implantable devices, it is of great importance to develop electroactive materials that possess mechanical reliability along with excellent electronic performance. The coexistence of these two attributes, however, is very difficult to achieve because there is an inverse relationship between the electrical properties and the mechanical flexibility, both of which are associated with the conjugation length and intermolecular ordering of the polymers. Herein, we demonstrate a simple and robust approach based on solution assembly of two different poly(3-hexylthiophene)s (P3HTs) with regioregularity (RR) contents of 97% and 66% to impart both electrical and mechanical properties to films for organic electronic applications. The 97% RR P3HT exhibits high electronic performance but poor mechanical resilience, and vice versa for the 66% RR P3HT. Selective crystallization of high RR P3HT induced by solution assembly allows the use of a one-step process to construct percolated networks of high RR P3HT nanowires (NWs) in a low RR P3HT matrix. Only 5 wt % of high RR P3HT NWs in a 95 wt % low RR P3HT matrix was required to produce hole mobilities comparable to that of pure high RR P3HT, and this blend film exhibited improvements by factors of 20 and 60 in elongation at break and toughness, respectively. Selective self-assembly of RR-controlled polymers allowed us to overcome the fragile nature of highly crystalline conjugated polymer films without sacrificing their electronic properties.

Boosting the Performance of Organic Optoelectronic Devices Using Multiple-Patterned Plasmonic Nanostructures.

Multiple-patterned nanostructures prepared by synergistically combining block-copolymer lithography with nano-imprinting lithography have been used as back reflectors for enhancing light absorption in organic optoelectronic devices. The multiple-patterned electrodes have significantly boosted the performance of organic photovoltaics and photo-transistors, owed to the highly effective light scattering and plasmonic effects, extending the range of their practical applications.

Characterization of drug authenticity using thin-layer chromatography imaging with a mobile phone.

Thin-layer chromatography (TLC) has a myriad of separation applications in chemistry, biology, and pharmacology due to its simplicity and low cost. While benchtop laboratory sample application and detection systems for TLC provide accurate quantitation of TLC spot positions and densities, there are many applications where inexpensive and portable instruments would greatly expand the applicability of the technology. In this work, we demonstrate identity verification and concentration determination of pharmaceutical compounds via TLC using a custom 3D-printed cradle that interfaces with an ordinary mobile phone. The cradle holds the mobile phone's internal, rear-facing camera in a fixed position relative to a UV lamp and a TLC plate that includes a phosphor in the stationary phase. Analysis of photographs thus reveals the locations and intensities of principal spots of UV--absorbing drugs. Automated image analysis software determines the center location and density of dark spots, which, using integrated calibration spots of known drug compounds and concentrations, can be used to determine if a drug has been diluted or substituted. Two independent image processing approaches have been developed that may be selected based upon the processing capabilities of the smartphone. Each approach is able to discern 5% drug concentration differences. Using single-component solutions of nevirapine, amodiaquine, and paracetamol that have been manually applied, the mobile phone-based detection instrument provides measurements that are equivalent to those obtained with a commercially available lab-based desktop TLC densitometer.

Flexible Organic Phototransistor Array with Enhanced Responsivity via Metal-Ligand Charge Transfer.

Phototransistors based on organic photoactive materials combine tunable light absorption in the spectral region from ultraviolet to near-infrared with low-temperature processability over large areas on flexible substrates. However, they often exhibit low photoresponsivity because of low molar extinction coefficient of photoactive components. We report a simple, yet highly efficient solution method for enhancing the performance of organic phototransistors using ruthenium complex 1 (Ru-complex 1). An air-stable n-type organic semiconductor, N,N'-bis(2-phenylethyl)-perylene-3,4:9,10-tetracarboxylic diimide (BPE-PTCDI), has been deposited on a silicon wafer and a transparent polyimide (PI) substrate via thermal evaporation under vacuum. The BPE-PTCDI phototransistors functionalized with Ru-complex 1 exhibit ∼5000 times higher external quantum efficiency (EQE) than that of pristine BPE-PTCDI phototransistors, owing to the metal-ligand charge transfer (MLCT) from Ru-complex 1 to the active component of the device. In addition, a large 10 × 10 phototransistor array (2.5 × 2.5 cm(2)) has been prepared on a transparent PI substrate, showing distinct light mapping. The fabricated phototransistor array is highly flexible and twistable and works well under tensile and compressive strains. We believe that our simple method will pave a viable way for improvements in the photoresponsivity of organic semiconductors for applications in wearable organic optoelectronic devices.

Quantitative Imaging of Cell Membrane-associated Effective Mass Density Using Photonic Crystal Enhanced Microscopy (PCEM).

Adhesion is a critical cellular process that contributes to migration, apoptosis, differentiation, and division. It is followed by the redistribution of cellular materials at the cell membrane or at the cell-surface interface for cells interacting with surfaces, such as basement membranes. Dynamic and quantitative tracking of changes in cell adhesion mass redistribution is challenging because cells are rapidly moving, inhomogeneous, and nonequilibrium objects, whose physical and mechanical properties are difficult to measure or predict. Here, we report a novel biosensor based microscopy approach termed Photonic Crystal Enhanced Microscopy (PCEM) that enables the movement of cellular materials at the plasma membrane of individual live cells to be dynamically monitored and quantitatively imaged. PCEM utilizes a photonic crystal biosensor surface, which can be coated with arbitrary extracellular matrix materials to facilitate cellular interactions, within a modified brightfield microscope with a low intensity non-coherent light source. Benefiting from the high sensitivity, narrow resonance peak, and tight spatial confinement of the evanescent field atop the photonic crystal biosensor, PCEM enables label-free live cell imaging with high sensitivity and high lateral and axial spatial-resolution, thereby allowing dynamic adhesion phenotyping of single cells without the use of fluorescent tags or stains. We apply PCEM to investigate adhesion and the early stage migration of different types of stem cells and cancer cells. By applying image processing algorithms to analyze the complex spatiotemporal information generated by PCEM, we offer insight into how the plasma membrane of anchorage dependent cells is dynamically organized during cell adhesion. The imaging and analysis results presented here provide a new tool for biologists to gain a deeper understanding of the fundamental mechanisms involved with cell adhesion and concurrent or subsequent migration events.

Water Processable Polythiophene Nanowires by Photo-Cross-Linking and Click-Functionalization.

Replacing or minimizing the use of halogenated organic solvents in the processing and manufacturing of conjugated polymer-based organic electronics has emerged as an important issue due to concerns regarding toxicity, environmental impact, and high cost. To date, however, the processing of well-ordered conjugated polymer nanostructures has been difficult to achieve using environmentally benign solvents. In this work, we report the development of water and alcohol processable nanowires (NWs) with well-defined crystalline nanostructure based on the solution assembly of azide functionalized poly(3-hexylthiophene) (P3HT-azide) and subsequent photo-cross-linking and functionalization of these NWs. The solution-assembled P3HT-azide NWs were successfully cross-linked by exposure to UV light, yielding good thermal and chemical stability. Residual azide units on the photo-cross-linked NWs were then functionalized with alkyne terminated polyethylene glycol (PEG-alkyne) using copper catalyzed azide-alkyne cycloaddition chemistry. PEG functionalization of the cross-linked P3HT-azide NWs allowed for stable dispersion in alcohols and water, while maintaining well-ordered NW structures with electronic properties suitable for the fabrication of organic field effect transistors (OFETs).

Planar Photonic Crystal Biosensor for Quantitative Label-Free Cell Attachment Microscopy.

In this study, a planar-surface photonic crystal (PC) biosensor for quantitative, kinetic, label-free imaging of cell-surface interactions is demonstrated. The planar biosensor surface eliminates external stimuli to the cells caused by substrate topography to more accurately reflect smooth surface environment encountered by many cell types in vitro. Here, a fabrication approach that combines nanoreplica molding and a horizontal dipping process is used to planarize the surface of the PC biosensor. The planar PC biosensor maintains a high detection sensitivity that enables the monitoring of live cell-substrate interactions with spatial resolution sufficient for observing intracellular attachment strength gradients and the extensions of filopodia from the cell body. The evolution of cell morphology during the attachment and spreading process of 3T3 fibroblast cells is compared between planar and grating-structured PC biosensors. The planar surface effectively eliminates the directionally biased cellular attachment behaviors that are observed on the grating-structured surface. This work represents an important step forward in the development of label-free techniques for observing cellular processes without unintended external environmental modulation.

Smartphone instrument for portable enzyme-linked immunosorbent assays.

We demonstrate the utilization of a smartphone camera as a spectrometer that is capable of measuring Enzyme Linked Immunosorbent Assays (ELISA) at biologically-relevant concentrations with the aid of a custom cradle that aligns a diffraction grating and a collimating lens between a light source and the imaging sensor. Two example biomarkers are assayed using conventional ELISA protocols: IL-6, a protein used diagnostically for several types of cancer, and Ara h 1, one of the principle peanut allergens. In addition to the demonstration of limits of detection at medically-relevant concentrations, a screening of various cookies was completed to measure levels of peanut cross-contamination in local bakeries. The results demonstrate the utility of the instrument for quantitatively performing broad classes of homogeneous colorimetric assays, in which the endpoint readout is the color change of a liquid sample.

Enhanced live cell imaging via photonic crystal enhanced fluorescence microscopy.

We demonstrate photonic crystal enhanced fluorescence (PCEF) microscopy as a surface-specific fluorescence imaging technique to study the adhesion of live cells by visualizing variations in cell-substrate gap distance. This approach utilizes a photonic crystal surface incorporated into a standard microscope slide as the substrate for cell adhesion, and a microscope integrated with a custom illumination source as the detection instrument. When illuminated with a monochromatic light source, angle-specific optical resonances supported by the photonic crystal enable efficient excitation of surface-confined and amplified electromagnetic fields when excited at an on-resonance condition, while no field enhancement occurs when the same photonic crystal is illuminated in an off-resonance state. By mapping the fluorescence enhancement factor for fluorophore-tagged cellular components between on- and off-resonance states and comparing the results to numerical calculations, the vertical distance of labelled cellular components from the photonic crystal substrate can be estimated, providing critical and quantitative information regarding the spatial distribution of the specific components of cells attaching to a surface. As an initial demonstration of the concept, 3T3 fibroblast cells were grown on fibronectin-coated photonic crystals with fluorophore-labelled plasma membrane or nucleus. We demonstrate that PCEF microscopy is capable of providing information about the spatial distribution of cell-surface interactions at the single-cell level that is not available from other existing forms of microscopy, and that the approach is amenable to large fields of view, without the need for coupling prisms, coupling fluids, or special microscope objectives.

Smartphone fluorescence spectroscopy.

We demonstrate the first use of smartphone spectrophotometry for readout of fluorescence-based biological assays. We evaluated the smartphone fluorimeter in the context of a fluorescent molecular beacon (MB) assay for detection of specific nucleic acid sequences in a liquid test sample and compared performance against a conventional laboratory fluorimeter. The capability of distinguishing a one-point mismatch is also demonstrated by detecting single-base mutation in target nucleic acids. Our approach offers a route toward portable biomolecular assays for viral/bacterial pathogens, disease biomarkers, and toxins.

Fabrication of one-dimensional organic nanomaterials and their optoelectronic applications.

This paper reviews the recent research and development of one-dimensional (1D) organic nanomaterials synthesized from organic semiconductors or conducting polymers and their applications to optoelectronics. We introduce synthetic methodologies for the fabrication of 1D single-crystalline organic nanomaterials and 1D multi-component organic nanostructures, and discuss their optical and electrical properties. In addition, their versatile applications in optoelectronics are highlighted. The fabrication of highly crystalline organic nanomaterials combined with their integration into nanoelectronic devices is recognized as one of the most promising strategies to enhance charge transport properties and achieve device miniaturization. In the last part of this review, we discuss the challenges and the perspectives of organic nanomaterials for applications in the next generation soft electronics, in terms of fabrication, processing, device integration, and investigation on the fundamental mechanisms governing the charge transport behaviors of these advanced materials.

Single nanoparticle detection using photonic crystal enhanced microscopy.

We demonstrate a label-free biosensor imaging approach that utilizes a photonic crystal (PC) surface to detect surface attachment of individual dielectric and metal nanoparticles through measurement of localized shifts in the resonant wavelength and resonant reflection magnitude from the PC. Using a microscopy-based approach to scan the PC resonant reflection properties with 0.6 µm spatial resolution, we show that metal nanoparticles attached to the biosensor surface with strong absorption at the resonant wavelength induce a highly localized reduction in reflection efficiency and are able to be detected by modulation of the resonant wavelength. Experimental demonstrations of single-nanoparticle imaging are supported by finite-difference time-domain computer simulations. The ability to image surface-adsorption of individual nanoparticles offers a route to single molecule biosensing, in which the particles can be functionalized with specific recognition molecules and utilized as tags.

Protein-protein binding detection with nanoparticle photonic crystal enhanced microscopy (NP-PCEM).

We demonstrate a novel microscopy-based biosensing approach that utilizes a photonic crystal (PC) surface to detect protein-protein binding with the functionalized nanoparticles as tags. This imaging approach utilizes the measurement of localized shifts in the resonant wavelength and resonant reflection magnitude from the PC biosensor in the presence of individual nanoparticles. Moreover, it substantially increases the sensitivity of the imaging approach through tunable localized surface plasmon resonant frequency of the nanoparticle matching with the resonance of the PC biosensor. Experimental demonstrations of photonic crystal enhanced microscopy (PCEM) imaging with single nanoparticle resolution are supported by Finite-Difference Time-Domain (FDTD) computer simulations. The ability to detect the surface adsorption of individual nanoparticles as tags offers a route to single molecule biosensing with photonic crystal biosensor in the future.