Biochar integrated reactive filtration of wastewater for P removal and recovery, micropollutant catalytic oxidation, and negative CO2 e: Process operation and mechanism.

Biochar (BC) use in water treatment is a promising approach that can simultaneously help address societal needs of clean water, food security, and climate change mitigation. However, novel BC water treatment technology approaches require operational testing in field pilot-scale scenarios to advance their technology readiness assessment. Therefore, the objective of this study is to evaluate the system performance of BC integrated into hydrous ferric oxide reactive filtration (Fe-BC-RF) with and without catalytic ozonation (CatOx) process in laboratory and field pilot-scale scenarios. For this investigation, Fe-BC-RF and Fe-CatOx-BC-RF pilot-scale trials were conducted on synthetic lake water variants and at three municipal water resource recovery facilities (WRRFs) at process flows of 0.05 and 0.6 L/s, respectively. Three native and two iron-modified BCs were used in these studies. The commercially available reactive filtration process (Fe-RF without BC) had 96%-98% total phosphorus (TP) removal from 0.075- and 0.22-mg/L TP, as orthophosphate process influent in these trials. With BC integration, phosphorus removal yielded 94%-98% with the same process-influent conditions. In WRRF field pilot-scale studies, the Fe-CatOx-BC-RF process removed 84%-99% of influent total phosphorus concentrations that varied from 0.12 to 8.1 mg/L. Nutrient analysis on BC showed that the recovered BC used in the pilot-scale studies had an increase in TP from its native concentration, with the Fe-amended BC showing better P recovery at 110% than its unmodified state, which was 16%. Lastly, the field WRRF Fe-CatOx-BC-RF process studies showed successful destructive removals at >90% for more than 20 detected micropollutants, thus addressing a critical human health and environmental water quality concern. The research demonstrated that integration of BC into Fe-CatOx-RF for micropollutant removal, disinfection, and nutrient recovery is an encouraging tertiary water treatment technology that can address sustainable phosphorus recycling needs and the potential for carbon-negative operation. PRACTITIONER POINTS: A pilot-scale hydrous ferric oxide reactive sand filtration process integrating biochar injection typically yields >90% total phosphorus removal to ultralow levels. Biochar, modified with iron, recovers phosphorus from wastewater, creating a P/N nutrient upcycled soil amendment. Addition of ozone to the process stream enables biochar-iron-ozone catalytic oxidation demonstrating typically excellent (>90%) micropollutant destructive removals for the compounds tested. A companion paper to this work explores life cycle assessment (LCA) and techno-economic analysis (TEA) to explore biochar water treatment integrated reactive filtration impacts, costs, and readiness. Biochar use can aid in long-term carbon sequestration by reducing the carbon footprint of advanced water treatment in a dose-dependent manner, including enabling an overall carbon-negative process.

Application of Dynamic Mode Decomposition to Study Temporal Flow Behavior in a Saccular Aneurysm.

Aneurysms are abnormal expansion of weakened blood vessels which can cause mortality or long-term disability upon rupture. Several studies have shown that inflow conditions spatially and temporally influence aneurysm flow behavior. The objective of this investigation is to identify impact of inflow conditions on spatio-temporal flow behavior in an aneurysm using dynamic mode decomposition (DMD). For this purpose, low-frame rate velocity field measurements are performed in an idealized aneurysm model using particle image velocimetry (PIV). The inflow conditions are precisely controlled using a ViVitro SuperPump system where nondimensional fluid parameters such as peak Reynolds number (Rep) and Womersely number (α) are varied from 50-270 and 2-5, respectively. The results show the ability of DMD to identify the spatial flow structures and their frequency content. Furthermore, DMD captured the impact of inflow conditions, and change in mode shapes, amplitudes, frequency, and growth rate information is observed. The DMD low-order flow reconstruction also showed the complex interplay of flow features for each inflow scenario. Furthermore, the low-order reconstruction results provided a mathematical description of the flow behavior in the aneurysm which captured the vortex formation, evolution, and convection in detail. These results indicated that the vortical structure behavior varied with the change in α while its strength and presence of secondary structures are influenced by the change in Rep.

Application of Proper Orthogonal Decomposition to Study Coherent Flow Structures in a Saccular Aneurysm.

Aneurysms are localized expansions of weakened blood vessels that can be debilitating or fatal upon rupture. Previous studies have shown that flow in an aneurysm exhibits complex flow structures that are correlated with its inflow conditions. Therefore, the objective of this study was to demonstrate the application of proper orthogonal decomposition (POD) to study the impact of different inflow conditions on energetic flow structures and their temporal behavior in an aneurysm. To achieve this objective, experiments were performed on an idealized rigid sidewall aneurysm model. A piston pump system was used for precise inflow control, i.e., peak Reynolds number (Rep) and Womersley number (α) were varied from 50 to 270 and 2 to 5, respectively. The velocity flow field measurements at the midplane location of the idealized aneurysm model were performed using particle image velocimetry (PIV). The results demonstrate the efficacy of POD in decomposing complex data, and POD was able to capture the energetic flow structures unique to each studied inflow condition. Furthermore, the time-varying coefficient results highlighted the interplay between the coefficients and their corresponding POD modes, which in turn helped explain how POD modes impact certain flow features. The low-order reconstruction results were able to capture the flow evolution and provide information on complex flow in an aneurysm. The POD and low-order reconstruction results also indicated that vortex formation, evolution, and convection varied with an increase in α, while vortex strength and formation of secondary structures were correlated with an increase in Rep.