Surface Modification of Polyimide Aerogel by Thermoplastic Polyurethane for Enhanced Mechanical Strength and Thermal Insulation Performance.

Polyimide (PI) aerogel is a good thermal insulation material with the highest temperature resistance in practical application. But the mechanical strength of PI aerogels prepared by freeze-drying or thermoimide methods is weak. In this research, TPU was selected as an aging solution to solve the problem of the low mechanical strength of PI aerogel prepared by the freeze-drying method. Previous work has certified that the coupling of PI and thermoplastic polyurethane (TPU) can enhance the mechanical strength of PI aerogel to a certain extent due to the flexibility of TPU. But excessive TPU will change the PI structure in the cross-linking process and decrease the mechanical strength of the aerogel. Thus, a new kind of PI gel modification method was provided by using TPU as an aging solution, and the mechanical strength of PI aerogel is improved to 3.06 MPa. Furthermore, the shrinkage, specific surface area, waterproof angle, and thermal conductivity all show good performance, thus enabling PI aerogel to be used in many aspects. Specially, the method is simple and can be used to prepare some other high-strength aerogels.

Carboxymethyl cellulose/polyvinyl alcohol composite aerogel supported beta molecular sieve for CH4 adsorption and storage.

Biomass aerogel is attractive in various applications due to their renewable, biodegradable and eco-friendly advantages. Herein, a novel beta molecular sieve/carboxymethyl cellulose/polyvinyl alcohol composite aerogel (beta/CP) is prepared by direct mixing and directional freeze-drying as an efficient gas adsorbent with hierarchical porosity. The beta molecular sieve is uniformly dispersed in the three-dimensional skeleton of the aerogel. By adjusting the loading mass of the beta molecular sieve to constitute a reasonable porosity and pore size distribution, the synergistic effect between pore structures of different scales improves the adsorption performance. The experiment results of beta/CP-4 show that the CH4 adsorption capacity can reach 60.33 cm3/g at 298 K and 100 bar, which is almost the same as that of the pure beta molecular sieve (62.09 cm3/g). The strong interaction between the aerogel and it prevents the molecular sieve agglomeration, improves the pore utilization, and also reduces the cost of using molecular sieve adsorbent. The above results indicate that the composite has good potential for application in the field of CH4 storage.

A multifunctional PAN/PVP nanofiber sponge wound dressing loaded with ZIF-8-derived carbon nanoparticles with adjustable wetness for rapid wound disinfection and exudate management.

Rapid and safe disinfection and exudate management are two major challenges in infected wound care. Therefore, in this work, we developed a novel wound dressing via encapsulating ZIF-8-derived carbon nanoparticles in a hydrophilic nanofiber sponge to address severe wound infection and heavy exudate problems. The dressing can effectively kill bacteria through chemo-photothermal synergistic therapy. Meanwhile, the hydrophilic nanofiber sponge can quickly absorb wound exudate around the wound and accelerate the evaporation rate of liquid through the photothermal effect and its own structure; therefore, it is possible to remove excess liquid and regulate its wetness. In this way, it prevents the problem of wound overhydration often caused by hydrophilic dressings. In our experiment, the dressing showed good antibacterial performance and biocompatibility in vitro and could effectively control wound infection, absorb wound exudate and promote skin wound healing in vivo. Its good therapeutic effect is not only due to effective infection control and wound exudate management, but also because the structure of nanofibers similar to an extracellular matrix provides basic physical support and structural  signals conducive to skin tissue regeneration.

Fabrication and Characterization of a High-Strength Polyimide/Thermoplastic Polyurethane Composite Aerogel with Hydrophobicity and Low Thermal Conductivity.

Polyimide (PI) aerogel has surfaced in research and development as a result of its heat resistance, flame retardancy, and low dielectric constant. However, it is still a challenge to reduce the thermal conductivity while improving its mechanical strength and retaining hydrophobicity. Herein, the PI/thermoplastic polyurethane (TPU) composite aerogel was synthesized by coupling TPU with PI via a novel method of chemical imidization combined with freeze-drying technology. With this technique, PI aerogel with excellent comprehensive performance is produced. Interestingly, the volume shrinkage of the composite aerogel decreased from 24.14 to 5.47%, which leads to low density (0.095 g/cm3) and elevated porosity (92.4%). In addition, strong mechanical strength (1.29 MPa) and high hydrophobicity (123.6°) were achieved. More importantly, PI/TPU composite aerogel demonstrated a low thermal conductivity of 29.51 mW m-1 K-1 at ambient temperature. Therefore, PI/TPU composite aerogel can be a promising material for hydrophobic and thermal insulation applications.

Sodium Alginate-Based Carbon Aerogel-Supported ZIF-8-Derived Porous Carbon as an Effective Adsorbent for Methane Gas.

Adsorption natural gas (ANG) is a technology in which natural gas is stored on the surface of porous materials at relatively low pressures, which are promising candidates for adsorption of natural gas. Adsorbent materials with a large surface area and porous structure plays a significant role in the ANG technology, which holds promise in increasing the storage density for natural gas while decreasing the operating pressure. Here, we demonstrate a facile synthetic method for rational construction of a sodium alginate (SA)/ZIF-8 composite carbon aerogel (AZSCA) by incorporating ZIF-8 particles into SA aerogel through a directional freeze-drying method followed by the carbonization process. The structure characterization shows that AZSCA has a hierarchical porous structure, in which the micropores originated from MOF while the mesopores are derived from the three-dimensional network of the aerogel. The experimental results show that AZSCA achieved high methane adsorption of 181 cm3·g-1 at 65 bar and 298 K, along with higher isosteric heat of adsorption (Qst) throughout the adsorption range. Thus, the combination of MOF powders with aerogel can find potential applications in other gas adsorption.

Konjac glucomannan/cellulose nanofibers composite aerogel supported HKUST-1 for CO2 adsorption.

Biomass aerogels are attractive in various applications owing to their inherent advantages of renewability, biodegradability and eco-friendly. Herein, a novel composite aerogel of konjac glucomannan (KGM)/TEMPO-oxidized cellulose nanofibers (TOCNF)@HKUST-1 (KTA@HKUST-1) is prepared through a facile vacuum impregnation method combined with the directional freeze-drying process, which using KGM and TOCNF as raw materials. The structural analyses disclose that the KTA@HKUST-1 has a hierarchical porosity, in which HKUST-1 can provide micropores for adsorption, while the meso-/macropores from KTA act as high-speed channels to improve diffusion and mass transfer rate to transport CO2 components into the micropores of HKUST-1. The experiment results of KTA@HKUST-1-10 (KTA@H10) show that the CO2 adsorption capacity can reach 3.50 mmol·g-1 at 1 bar and 298 K, and the adsorption capacity retention rate as high as 91.43% after 7 cycles. In addition, the CO2/N2 adsorption selectivity of KTA@H10 can reach 18.42, which has an excellent potential for selective CO2 adsorption.

A single dual-targeting fluorescent probe enables exploration of the correlation between the plasma membrane and lysosomes.

The interactions between organelles can maintain normal cell activity. Lysosomes, as waste disposal systems of cells, have many important interactions with the plasma membrane, especially in the repair of cracked plasma membrane. Unfortunately, a way to study the relationship between them synchronously is still lacking. Therefore, in this work, we constructed a dual-targeting probe (Mem-Lyso) to simultaneously visualize the plasma membrane and lysosomes for the first time. Taking advantage of dual-targeting, the probe Mem-Lyso could successfully track and analyze the dynamic changes of the plasma membrane and lysosomes in different bioprocesses. The experimental results demonstrated that, compared to the normal status, there was obvious fusion between the plasma membrane and lysosomes in the apoptosis process. Furthermore, because of the sensitivity to polarity, Mem-Lyso could label the plasma membrane and lysosomes with red and yellow colors in cells, respectively. Moreover, the skeleton and gastrointestinal wall of zebrafish were visualized by dual-color imaging, respectively. More importantly, the dual-targeting property endowed Mem-Lyso with the ability to spatially distinguish the cholesterol (CL) content in the plasma membrane, which provided a potential detection tool for biological research and diagnosis of related diseases.

Z-scheme polyimide/tungsten trioxide aerogel photocatalyst for enhanced photocatalytic CO2reduction under visible light.

Developing highly efficient and stable photocatalysts is an effective method to achieve CO2photocatalytic reduction. Herein, PI/WO3aerogel photocatalyst was prepared by chemical amide reaction coupled with an ethanol supercritical drying technique. The novel aerogel photocatalysts exhibit excellent photocatalytic performance for reducing CO2into CO. In particular, PI/WO3-10 aerogel photocatalyst shows the highest yield of CO (5.72µmol g-1h-1), which is ca 11-fold higher than that of the pristine PI aerogel. The high CO2reduction activity can be attributed to the Z-scheme structure, which enhances the separation of photo-generated electron-holes, and induces H2O oxidation on WO3nanosheets and CO2reduction on PI aerogel. The photocatalytic reaction mechanism of CO2when using PI/WO3aerogel photocatalyst is proposed.

Nitrogen-doped carbon composite derived from ZIF-8/polyaniline@cellulose-derived carbon aerogel for high-performance symmetric supercapacitors.

Cellulose derived carbon aerogel (CA) with unique three-dimensional network coated with polyaniline (PANI) on its surface is used as a scaffolding framework to anchor ZIF-8. The designed ZIF-8 derived porous carbon (ZC)/PANI@CA (ZPCA) hybrid carbon composite through a facile solution immersion chemical route and subsequent carbonization process is employed as electrode for supercapacitor, which has contributed a large specific surface area, a hierarchical porous structure and reasonable N content (up to 6.27 at.%). The synthesized ZPCA electrode achieves an outstanding capacitance of 388 F g-1 at 0.5 A g-1 as well as an excellent cycling performance. More inspiringly, the symmetric supercapacitor based ZPCA achieves a high energy density of 13.4 Wh kg-1 at a power density of 250 W kg-1 using 2 M KOH aqueous solution, and an ultrahigh energy density of 81.8 Wh kg-1 at a power density of 950 W kg-1 is realized using Et4NBF4/AN electrolyte.

Ultrathin Photonic Polymer Gel Films Templated by Non-Close-Packed Monolayer Colloidal Crystals to Enhance Colorimetric Sensing.

Responsive polymer-based sensors have attracted considerable attention due to their ability to detect the presence of analytes and convert the detected signal into a physical and/or chemical change. High responsiveness, fast response speed, good linearity, strong stability, and small hysteresis are ideal, but to gain these properties at the same time remains challenging. This paper presents a facile and efficient method to improve the photonic sensing properties of polymeric gels by using non-close-packed monolayer colloidal crystals (ncp MCCs) as the template. Poly-(2-vinyl pyridine) (P2VP), a weak electrolyte, was selected to form the pH-responsive gel material, which was deposited onto ncp MCCs obtained by controlled O2 plasma etching of close-packed (cp) MCCs. The resultant ultrathin photonic polymer gel film (UPPGF) exhibited significant improvement in responsiveness and linearity towards pH sensing compared to those prepared using cp MCCs template, achieving fast visualized monitoring of pH changes with excellent cyclic stability and small hysteresis loop. The responsiveness and linearity were found to depend on the volume and filling fraction of the polymer gel. Based on a simple geometric model, we established that the volume increased first and then decreased with the decrease of template size, but the filling fraction increased all the time, which was verified by microscopy observations. Therefore, the responsiveness and linearity of UPPGF to pH can be improved by simply adjusting the etching time of oxygen plasma. The well-designed UPPGF is reliable for visualized monitoring of analytes and their concentrations, and can easily be combined in sensor arrays for more accurate detection.