ABSTRACT
Erysolin and its two metabolites which were found in blood, ERY-GSH and ERY-NAC, were synthesized by alkylation, amination, isothiocyanation and oxidation reactions from 1-bromo-4-chlorobutane and sodium methyl mercaptide. The reaction temperature, time, feed ratios and purification method were also optimized. The synthesis method was simple, green, safe and low-cost. Erysolin, ERY-GSH and ERY-NAC showed good antitumor activities against MCF-7, HeLa, HepG2, A549 and SW480 cells, which suggested that the antitumor mechanism of erysolin can also be clarified from its metabolites in addition to itself.
Subject(s)
Antineoplastic Agents , Thiocyanates , Humans , Thiocyanates/pharmacology , HeLa Cells , Sulfones/pharmacology , Drug Screening Assays, Antitumor , Antineoplastic Agents/pharmacology , Cell ProliferationABSTRACT
Treatment of ventilation air methane (VAM) with cost-effective technologies has been an ongoing challenge due to its high volumetric flow rate with low and variable methane concentrations. In this work, honeycomb monolithic carbon fiber composites were developed and employed to capture VAM with a large-scale test unit at various conditions such as VAM concentration, ventilation air (VA) flow rate, temperature, and purging fluids. Regardless of inlet VAM concentrations, methane was captured at almost 100%. To regenerate the composites, the initial vacuum swing followed by combined temperature and vacuum swing adsorption (TVSA) was applied. It was found that initial vacuum swing is a control step for the final methane concentration having 5 or 11 times the VAM enrichment by one-step adsorption, which is, to our knowledge, the best performance achieved in VAM enrichment technologies worldwide. Five-time enriched VAM can be utilized as a principle fuel for lean burn turbine. Also, it can be further enriched by second step adsorption to more than 25% which then can be used for commercially available gas engines. In this way, the final product can be out of the methane explosive range (5-15%).
Subject(s)
Air , Carbon/chemistry , Methane/analysis , Ventilation , Adsorption , Carbon Dioxide/chemistry , Carbon Fiber , Nitrogen/chemistry , Porosity , Rheology , Temperature , VacuumABSTRACT
Coal mine methane (CMM) is not only a hazardous greenhouse gas but is also a wasted energy resource, if not utilised. This paper evaluates a novel adsorbent material developed for capturing methane from ventilation air methane (VAM) gas in underground coal mines. The adsorbent material is a honeycomb monolithic carbon fibre composite (HMCFC) consisting of multiple parallel flow-through channels and the material exhibits unique features including low pressure drop, good mechanical properties, ability to handle dust-containing gas streams, good thermal and electrical conductivity and selective adsorption of gases. During this study, a series of HMCFC adsorbents (using different types of carbon fibres) were successfully fabricated. Experimental data demonstrated the proof-of-concept of using the HMCFC adsorbent to capture methane from VAM gas. The adsorption capacity of the HMCFC adsorbent was twice that of commercial activated carbon. Methane concentration of 0.56% in the inlet VAM gas stream is reduced to about 0.011% after it passes through the novel carbon fibre composite adsorbent material at ambient temperature and atmospheric pressure. This amounts to a maximum capture efficiency of 98%. These encouraging laboratory scale studies have prompted further large scale trials and economic assessment.
