Effect of 3D printing and traditional molding on phenolic compounds and antioxidant activity in steamed bread.

The production process of fermented black wheat steamed bread is closely related to the overall quality and nutritional content. In this study, we investigated the accuracy, product texture profile and antioxidant activity of fermented black wheat steamed bread samples produced by piston and spiral three-dimensional (3D) printers. The steaming process generally increased the total phenolic content and flavonoid content of the samples. The spiral 3D printer obtained samples with higher accuracy, total phenolic content up to 1960.43 Mg GAE/kg, and higher cellular antioxidant activity (CAA) content. The samples printed by the piston 3D printer showed higher total flavonoid content (575.75 Mg QE/kg), 2, 2'-azobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) values and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) values. This study shows that antioxidant-rich health foods can be prepared using 3D printed black wheat flour. The choice of 3D printing method affects the overall quality and nutritional content of the final product.

Microwave pretreatment effects on the aroma precursors, sensory characteristics and flavor profiles of fragrant rapeseed oil.

Microwave technology offers a rapid and uniform heating method. This study investigated how microwave pretreatment affects the aroma precursors and flavor of fragrant rapeseed oils (FROs). Microwave pretreatment led to decreased levels of polyunsaturated fatty acids, sugars, protein-bound amino acids, and glucosinolates. Using gas chromatography-mass spectrometry, we identified 66 volatile compounds in the oil samples. Among these, based on odor activity values (OAV ≥ 1), we found 9 aldehydes, 1 ketone, 6 pyrazines, 1 isothiocyanate, and 7 nitriles as the key aroma-active compounds, contributing fatty-like, nutty-like, and pungent-like odors, respectively. The electronic nose results highlighted W5S and W1W as primary sensors for determining the flavor profiles of FROs. Notably, aroma-active pyrazines exhibited strong negative correlations with sucrose, cysteine, lysine, and isoleucine. This research provides essential insights for enhancing the aroma of FROs.

Effect of pre-treatments and frying conditions on the formation of starch-lipid complex in potato starch chips during deep-frying process.

This study examined the influence of various pretreatment methods, frying durations, and temperatures, as well as the type of frying oil, on the formation and structure of starch-lipid complexes in fried potato chips. Potato starch was processed into dough, sliced, and subjected to deep frying following various pretreatments. Structural analysis showed that steaming as a pretreatment facilitated the generation of V-type starch-lipid complexes, whereas resistant starch type III (RS3) materialized in the desiccated samples instead of the anticipated complexes. The rate of starch-lipid complex formation initially surged but subsequently declined as treatment time increased. A reduction in treatment temperature from 190 °C to 170 °C was conducive to complex formation. Moreover, the maximum relative crystallinity (19.74 %) and ΔH value (7.76 J/g) were recorded for potato starch slices pretreated by steaming and frying in palm oil. Rapeseed oil, which is rich in unsaturated fatty acids (89.98 %), inhibits complex formation. The study concludes that pretreatment methods exert a substantial effect on the formation of starch-lipid complexes and that extended frying duration and elevated temperature may reduce this formation. Oils with longer-chain fatty acids and a lower degree of unsaturation were favorable for complex formation.

Pickering emulsions stabilized by starch nanocrystals prepared from various crystalline starches by ultrasonic assisted acetic acid: Stability and delivery of curcumin.

Ultrasonic assisted acetic acid hydrolysis was applied to prepare starch nanocrystals (SNCs) from native starches with different crystalline structures (A, B, and C types). The structure properties, morphology, Pickering emulsion stability and curcumin deliver capacity of both SNCs and native starches were investigated and compared. Compared with native starches, SNCs showed smaller size and higher crystallinity. The size of SNCs varied with different crystalline types, with C-type starch exhibiting the smallest SNCs (107.4 nm), followed by A-type (113.8 nm), and B-type displaying the largest particle size (149.0 nm). SNCs-Pickering emulsion showed enhanced stability with smaller emulsion droplets, higher static stability, and denser oil/water interface. SNCs-Pickering emulsions displayed higher curcumin loading efficiency (53.53 %-61.41 %) compared with native starch-Pickering emulsions (13.93 %-19.73 %). During in vitro digestion, SNCs-Pickering emulsions proved to be more proficient in protecting and prolonging the biological activity of curcumin due to their smaller size and better interfacial properties. These findings demonstrated the potential of SNCs for application in Pickering emulsion and delivery of bioactive components.

Differential metabolic networks in three energy substances of flaxseed (Linum usitatissimum L.) during germination.

Germinated flaxseed (Linum usitatissimum L.) is an essential potential food ingredient, but the major energy substances (proteins, lipids, and carbohydrates) metabolites and metabolic pathways are unknown. Comprehensive metabolomic analyses were performed using Fourier transform infrared spectroscopy and high-performance liquid chromatography mass spectrometry on flaxseed from 0 to 7 d. Additionally, the critical metabolites pathways networks of three energy substances metabolites during flaxseed germination were exhibited. The results showed that arginine was the most active metabolite during germination, strongly associated with the arginine biosynthesis and arginine and proline metabolism pathways. Carbohydrates predominantly comprised sucrose on 0-3 d, which participated in galactose metabolism and starch and sucrose metabolism. The main flaxseed phospholipid molecules were phosphatidic acid, phosphatidylethanolamine, lysophosphatidic acid, and lysophosphatidylcholine during germination. This study underscores the paramount metabolic pathways in proteins, lipids and carbohydrates were arginine and proline metabolism, linoleic acid metabolism, arachidonic acid metabolism, and ascorbate and aldarate metabolism during germination.

High-efficiency preparation of starch nanocrystals with small size and high crystallinity by ethanol-acid penetration and dry-heating pretreatment.

Ethanol-acid penetration and drying-heating treatment was developed to shorten the preparation time and improve the quality of starch nanocrystals (SNCs). After treatment by optimized parameters, including 40 % ethanol solution, 10.6 mM chloric acid, and heating time of 1.5 h or 2.0 h, the starches exhibited weakened internal structure and relatively complete crystalline structure. Compared with the regular preparation of only acid hydrolysis, the regular final yield (8.5 % after 5 days) was reached in 48 h and 12 h of the starch heated at 1.5 h and 2.0 h, respectively. The micromorphology, molecular weight, and crystalline structure evaluation demonstrated that the collected nanoparticles were indeed SNCs with smaller size and higher relative crystallinity than regular SNCs. Further analysis found that the SNCs had better crystalline lamellae, higher thermal stability, and lower proportion of phosphorus and sulfur atoms than regular SNCs. This provided a potential method for the high-efficiency preparation of SNCs.

Indication of the color change on the oxidation properties of fragrant rapeseed oil during shelf storage.

The cause and trend of color change and their links to oxidative properties were investigated by simulating shelf storage conditions for fragrant rapeseed oils (FROs). Under illumination, the L* value gradually increased with the storage time. The a* and b* values showed different trends depending on brands. The photodegradation rates of chlorophylls were 8.6 âˆ¼ 15 times higher than those of carotenoids. The change in color of FROs was mainly caused by the light-induced photodegradation of chlorophyll. Compared with the hydroperoxides, the contents of some secondary oxidation products [i.e., 2-butenal, octane, (Z)-2-octene, 2,4-octadiene, (Z)-2-heptenal, (E, E)-2,4-heptadienal, and (E)-2-decenal] were more closely associated with the color variation with correlation coefficients of 0.6 âˆ¼ 0.94. Significant negative correlation was found between α-tocopherol content and oil color difference. Therefore, illumination was the main reason for the color degradation of the FROs. The varying degree of color difference was strongly linked to the quality deterioration caused by oxidation.

A new sight separation for collecting starch nanocrystals with small size and high crystallinity based on the hydrolysis mechanism.

To prevent starch nanocrystals (SNCs) that are generated at an early stage from being hydrolyzed excessively, this study proposed a new separation method, named "neutral dispersion and acidic precipitation." SNCs were prepared from waxy potato starch by sulfuric acid hydrolysis. Based on the results of kinetics and molecular weight, the hydrolysis was divided into three stages, e.g., rapid (initial 1 day), medium (subsequent 1 day) and slow stage (2-5 days). The rapid and medium stages were related to the degradation of amorphous region in starch, and the slow stage mainly referred to SNC release. Therefore, the method was developed to separate SNCs at the slow stage. After centrifugation at 6000 rpm, large particles were removed from the SNC suspension under pH 7. The SNCs with small average size and crystallite size, high relative crystallinity (RC), and high dispersion stability in the supernatant were retained and were then precipitated entirely under pH 5, because pH 5 led to the reduction of dispersion stability of SNCs. Meanwhile, the hydrothermal and dry-thermal stability of separated SNCs were significantly promoted. The separation method has the potential in SNC preparation for increasing the yield and collecting products with small size and high RC.

Structural, rheological, pasting, and digestive properties of wheat A-starch: Effect of outshell removal combined with annealing.

Wheat A- starch was subjected to single and combined CaCl2 and annealing (ANN) treatments. The influence of the treatment on wheat A- starch's structural, rheological, pasting, and digestive characteristics were studied. The results indicated that the application of CaCl2 treatment caused the removal of the outer layer of wheat A-starch, disrupted the integrity of the growth ring structure, and lowered the molecular weight of amylopectin and relative crystallinity. Meanwhile, the application of outshell removal combined with ANN treatment led to significant damage to the starch granules, resulting in a marked reduction in relative crystallinity, as well as the molecular weight of amylopectin and amylose. However, no changes were found in the non-Newtonian pseudoplastic behavior of starch after single or combined treatments. Furthermore, the combination of outshell removal and annealing treatment resulted in a decreased peak viscosity as well as trough viscosity of starch. Moreover, long-time ANN treatment had the potential to improve the resistant starch (RS) content of deshell starch.

Characterization of quinoa starch nanoparticles as a stabilizer for oil in water Pickering emulsion.

Quinoa starch nanoparticles (QSNPs) prepared by nanoprecipitation had a uniform particle size of 191.20 nm. QSNPs with amorphous crystalline structure had greater contact angle than QS with orthorhombic crystalline structure, which can therefore be utilized to stabilize Pickering emulsions. QSNPs-based Pickering emulsions prepared by suitable formulations (QSNPs concentration of 2.0-2.5 %, oil volume fraction of 0.33-0.67) exhibited good stability against pH of 3-9 and ionic strength of 0-200 mM. The oxidative stability of the emulsions increased with increasing starch concentration and ionic strength. Microstructural and rheological results indicated that the structure of the starch interfacial film and the thickening effect of the water phase affected the emulsion stability. The emulsion had excellent freeze-thaw stability and can be produced as a re-dispersible dry emulsion using the freeze-drying technique. These results implied that the QSNPs had great potential for application in the preparation of Pickering emulsions.

Antioxidant properties of lipid concomitants in edible oils: A review.

Edible oils are indispensable for human life, providing energy and necessary fatty acids. Nevertheless, they are vulnerable to oxidation via a number of different mechanisms. Essential nutrients deteriorate as well as toxic substances are produced when edible oils are oxidized; thus, they should be retarded wherever possible. Lipid concomitants have a strong antioxidant capacity and are a large class of biologically active chemical substances in edible oils. They have shown remarkable antioxidant properties and were documented to improve the quality of edible oils in varied ways. An overview of the antioxidant properties of the polar, non-polar, and amphiphilic lipid concomitants present in edible oils is provided in this review. Interactions among various lipid concomitants and the probable mechanisms are also elucidated. This review may provide a theoretical basis and practical reference for food industry practitioners and researchers to understand the underlying cause of variations in the quality of edible oils.

Physicochemical, Structural Structural and Functional Properties of Non-Waxy and Waxy Proso Millet Protein.

The physicochemical, structural and functional properties of proso millet protein from waxy and non-waxy proso millet were investigated. The secondary structures of proso millet proteins consisted mainly of a ß-sheet and ɑ-helix. The two diffraction peaks of proso millet protein appeared at around 9° and 20°. The solubility of non-waxy proso millet protein was higher than that of waxy proso millet protein at different pH values. Non-waxy proso millet protein had a relatively better emulsion stability index (ESI), whereas waxy proso millet protein had a better emulsification activity index (EAI). Non-waxy proso millet protein showed a higher maximum denaturation temperature (Td) and enthalpy change (ΔH) than its waxy counterpart, indicating a more ordered conformation. Waxy proso millet exhibited higher surface hydrophobicity and oil absorption capacity (OAC) than non-waxy proso millet, suggesting that the former may have potential applications as a functional ingredient in the food industry. There was no significant difference in the intrinsic fluorescence spectra of different waxy and non-waxy proso millet proteins at pH 7.0.

Effect of germination pretreatment on the physicochemical properties and lipid concomitants of flaxseed oil.

This study investigated the effects of germination pretreatment on the physicochemical properties, lipid concomitants, and antioxidant activity of flaxseed oil in three varieties. The results indicated that the oil content of flaxseed decreased by 2.29-7.40% during the 5 days germination period. Germinated flaxseed oil showed a significantly higher acid value and lower peroxide value. The unsaturated fatty acid content was slightly increased by germination. Germination pretreatment resulted in significant increases in the α-tocopherol, stigmasterol, pigments, total phenols, and antioxidant activity. As germination time progressed to 5 days, α-tocopherol which was traditionally recognized as having the highest antioxidant activity form of vitamin E in humans increased from 3.07-6.82 mg kg-1 to 258.11-389.78 mg kg-1. Germinated oil had 1.63 to 2.05 times higher stigmasterol content than non-germinated oil. The chlorophyll and carotenoid also increased exponentially. The total phenol content of flaxseed oil increased from 64.29-75.85 mg kg-1 to 236.30-297.78 mg kg-1. Germinated flaxseed oil showed important antioxidant activity. Compared with other varieties during germination, the oil from Gansu showed a higher level of α-linolenic acid, tocopherols, and carotenoid, and a maximum increase level of tocopherols and phytosterols. The comprehensive evaluation of germination time by correlation and principal component analysis showed that when germination time exceeded 2 days, the lipid concomitants and antioxidant capacity of flaxseed oil were significantly improved.

Comparison of properties and application of starch nanoparticles optimized prepared from different crystalline starches.

Starch nanoparticles (SNPs) were produced by nanoprecipitation combined with ultrasonication with the use of different starches (corn, potato and sago starch) and used to stabilize Pickering emulsions. The orthogonal experiment was used to optimize preparation conditions of gelatinization pretreatment duration of 30 min, ultrasonic power of 600 W, and ultrasonic time of 40 min. Compared with native starch, the SNPs were spherical in shape and displayed a V-type crystalline structure with low relative crystallinity and higher degree of double-helix. Compared with native starch-Pickering emulsion, the SNP-Pickering emulsion had a smaller droplet size, more uniform distribution, clearer oil/water interface, and higher static stability of droplets. The sago SNP-Pickering emulsion had the great gelatinous structure and emulsion stability. In addition, the SNP-Pickering emulsion had the better loading efficiency and controlled release performance of curcumin. Meanwhile, the bioavailability of curcumin in sago SNP-Pickering emulsion was highest.

Synthesized alkyl ferulates with different chain lengths inhibited the formation of lipid oxidation products in soybean oil during deep frying.

The hydrophilic nature of ferulic acid limits its applications under lipophilic conditions. This study set out to evaluate the antioxidant efficacy of alkyl ferulates with different chain lengths in soybean oil under frying conditions. Ferulic acid was esterified with four unbranched fatty alcohols (C4:0-C16:0), and tert-butylhydroquinone (TBHQ) served as a standard for comparison. The antioxidant effect of alkyl ferulates increased with the alkyl chain length. The addition of antioxidants could inhibit increases in the levels of p-anisidine, total polar compounds, conjugated dienes, conjugated trienes, oxidized triglyceride monomers, triglyceride dimers, triglyceride oligomers, and glycerol core aldehydes efficiently, and the inhibitory effects of hexadecyl ferulate was the strongest. Moreover, hexadecyl ferulate and TBHQ exhibited better inhibitory effects on the generation of n-alkanals, (E)-2-alkenals, and 4-oxo-alkanals determined by 1H nuclear magnetic resonance than others. Hence, the long-chain alkyl ferulates meet the industrial demands for ideal antioxidants with strong antioxidant capacity at high temperatures.

Dynamics of composition, structure, and metabolism of three energy substances in flaxseed (Linum usitatissimum L.) during germination.

The composition and structure changes of three energy substances (protein, lipid, and sugar) and minerals during flaxseed germination were investigated. Na, Ca, Fe, and total free amino acids fluctuating increased and peaked at 7 d. Oil and ɑ-linolenic acid contents increased initially and reached the maximal increment by 14.8 % and 1.4 % (p < 0.05) at 2 d, after which it declined. Soluble sugar mainly consisted of sucrose (50.47 %-72.77 %), glucose, and fructose during germination. Semi-cylindrical depression was enhanced on flaxseed granule surface, and oil bodies distribution from relatively uniform toward cell wall during 0-2 d. Protein order and stability were varied firstly, then grew steadily at 4-7 d and peaked at 7 d. Metabolic sequence (sugar, protein, and lipid) and related tricarboxylic acid pathway were proposed. Conclusively, germinated flaxseed at 2 and 4 d had higher physicochemical and structural properties, which could serve as high-quality resources for lipid and protein processing respectively.

Formation mechanism of starch nanocrystals from waxy rice starch and their separation by differential centrifugation.

Starch nanocrystals (SNCs) were prepared from waxy rice starch via sulfuric acid hydrolysis. The objective focused on the following: i) the hydrolysis kinetics and structural properties of SNCs; ii) the effects of differential centrifugation on the yield and size distribution of SNCs. The hydrolysis was divided into a rapid hydrolysis stage in the initial two days and a slow hydrolysis stage after two days. During the two-day hydrolysis, the average diameter of SNCs reached 244 nm. After two days of hydrolysis, the degree of crystallinity, crystallite size, and melting temperature and enthalpy increased. The proportion of A-branched chains decreased, whereas the proportion of B1-branched chains and molecular weight did not change considerably. Thus, the reaction in the slow hydrolysis stage could be considered as the surface modification and gradual release of SNCs. Furthermore, SNCs with a small size and high charge density could be used for differential centrifugation.

Effects of various microwave intensities collaborated with different cold plasma duration time on structural, physicochemical, and digestive properties of lotus root starch.

Lotus root starch was treated with single and combined microwave (300 and 700 W) and cold plasma (60, 90, and 120 s) treatments. Effects of treatments on multi-structural, physicochemical, and digestive properties of lotus root starch were investigated. The results revealed that a combination of cold plasma and microwave treatments significantly affected the morphology of starch granules and reduced the relative crystallinity of starch compared with a single treatment. However, no changes were found in the chemical functional groups of starch after single or combined treatments. Additionally, the amylose content, amylopectin branch chain length distribution, solubility, and swelling power of the starch significantly varied depending on cold plasma treatment duration and microwave power. Furthermore, the treated starch showed lower peak viscosity and higher pasting temperature than the native one. Moreover, the resistant starch content significantly decreased as cold plasma treatment was prolonged and microwave power increased.

Structure, physicochemical, functional and in vitro digestibility properties of non-waxy and waxy proso millet starches.

The structural, physicochemical, gel textural, rheological, and in vitro digestibility properties as well as their relationships of non-waxy proso millet starch (NPMS) and waxy proso millet starch (WPMS) were evaluated by taking normal corn starch (CS) and potato starch (PS) as controls. Proso millet starch was mostly polygonal or spherical, with an A-type crystalline structure. Proso millet starch contained more short-branched chains (DP 6-24) compared with CS and PS. WPMS possessed higher crystallinity and more short-range ordered structures than NPMS. NPMS displayed higher pasting temperature, retrogradation rate and shear thinning degree, and lower gelatinization temperature and enthalpy than WPMS. The hardness and chewiness of starch gel formed by NPMS were higher than those of WPMS. All starch samples exhibited shear thinning behavior in the steady-flow test and typical elastic solid behavior in the dynamic rheological test. Moreover, NPMS was considered a potential formula for functional foods, with its lower rapidly digestible starch (RDS) and higher resistant starch (RS) contents than WPMS, CS, and PS. This paper revealed the influence of amylose content and structure on the physicochemical properties of different proso millet starch.

Mechanism, indexes, methods, challenges, and perspectives of edible oil oxidation analysis.

Edible oils are indispensable food components, because they are used for cooking or frying. However, during processing, transport, storage, and consumption, edible oils are susceptible to oxidation, during which various primary and secondary oxidative products are generated. These products may reduce the nutritional value and safety of edible oils and even harm human health. Therefore, analyzing the oxidation of edible oil is essential to ensure the quality and safety of oil. Oxidation is a complex process with various oxidative products, and the content of these products can be evaluated by corresponding indexes. According to the structure and properties of the oxidative products, analytical methods have been employed to quantify these products to analyze the oxidation of oil. Combined with proper chemometric analytical methods, qualitative identification has been performed to discriminate oxidized and nonoxidized oils. Oxidative products are complex and diverse. Thus, proper indexes and analytical methods should be selected depending on specific research objectives. Expanding the mechanism of the correspondence between oxidative products and analytical methods is crucial. The underlying mechanism, conventional indexes, and applications of analytical methods are summarized in this review. The challenges and perspectives for future applications of several methods in determining oxidation are also discussed. This review may serve as a reference in the selection, establishment, and improvement of methods for analyzing the oxidation of edible oil.HighlightsThe mechanism of edible oil oxidation analysis was elaborated.Conventional oxidation indexes and their limited values were discussed.Analytical methods for the determination of oxidative products and qualitative identification of oxidized and non-oxidized oils were reviewed.