ABSTRACT
A beam scanning antenna based on an all-metal lens is presented for high-power microwave (HPM) application in this paper. This design includes a feed antenna and two layers of different all-metal lenses, whose prototypes operating at 14.25 GHz have been successfully designed and fabricated with an aperture radius of 300 mm. A full transmission phase range of 360° can be achieved with a transmission efficiency of over 99% by rotating the cross-slot on the lens elements. The results of the low-power tests depict that the designed antenna can realize a beam scanning range of 120° revolving cone angle with the side lobe below -10 dB and the reflection coefficient less than -16 dB. The high-power tests demonstrate that the power handling capacity of the antenna is higher than 350 MW in sulfur hexafluoride (SF6). In addition, both the designed lenses have a bandwidth of more than 100 MHz. All the merits show that our designed all-metal lens antenna has a great potential to be applied in HPM systems.
ABSTRACT
To solve the problem of the large axial size of high-power microwave (HPM) reflectarray antenna and difficulty in vacuum packaging, a dielectric is introduced in the design of the antenna element. On this basis, a dielectric embedded metasurface reflectarray antenna (DEMRA) with high power handling capacity and wide-range beam scanning capability is proposed and fabricated. Compared with traditional HPM antennas, the DEMRA does not need to be sealed and can work directly in open-air conditions. The DEMRA can realize free regulation of the radiation beam within a cone angle of 90° and has a power handling capacity of 1 GW/m2. As verification, a protype working at 10 GHz is fabricated and low-power experiments are carried out. Experimental results are consistent with the simulation, proving that the DEMRA has a bandwidth exceeding 600 MHz. During the scanning process, the aperture efficiency is always higher than 48.98%, and the side lobe level remains below -15 dB. At the same time, the cross-polarization component is less than -15 dB, while the main lobe-axis ratio remains within 4.5 dB, confirming its beam scanning capability.
ABSTRACT
In circular waveguides, the TE01 mode has the lowest transmission loss, which is very suitable for long-distance transmission of high-power microwaves (HPMs). The output mode of HPM sources is mainly the TM01 mode; however, there are few research studies on mode converters of TM01-TE01. In this paper, a high efficiency HPM TM01-TE01 mode converter is designed; compared with the traditional TM01-TE01 mode converters, the structure of the mode converter is compact and easier to process. It is mainly composed of an input circular waveguide, a tapered rectangular waveguide, a 90° bent rectangular waveguide, and an output circular waveguide. A prototype with a center frequency of 2.4 GHz is fabricated and HPM experiments are carried out. The transmission efficiency of this device reaches 99.8% in the simulation, and the measured transmission efficiency is more than 98%. Additionally, the measured power handling capacity is more than 1 GW, which is consistent with simulation. This design has important reference significance for the design of long-distance power transmission devices and HPM mode converters.
ABSTRACT
A compact double-layer wideband 1:60 power divider/combiner based on a radial-line waveguide is designed and investigated for high-power microwave (HPM) applications. Compared with other HPM radial-line power dividers, the proposed power divider is smaller and more compact. The power divider is miniaturized by the double-layer method, and the wideband characteristic is realized by a specially designed wavy disk. Moreover, it can divide the microwave energy into 60 output ports equally by symmetrical design. As for simulation, in the range of 1.64-3.6 GHz, the voltage standing-wave ratio is below 2 (the relative bandwidth is 76%) and the return loss reaches -44 dB at 2.1 GHz. Additionally, a prototype is fabricated and the wideband performance from 1.6 to 2.6 GHz is verified by an existing wideband antenna array. Furthermore, filled with SF6 (0.3 MPa), the theoretical power handling capacity is more than 200 MW and the device works steadily in HPM tests under the condition of 140 MW. To sum up, the compact power divider/combiner has important application potentials in HPM fields.
ABSTRACT
A novel all-metal phase shifter with continuous linear phase adjustment for high-power microwave applications is presented and tested in this paper. The phase adjustment is achieved through the rotation of a phase reverser for a circularly polarized wave, and the output phase accomplishes a phase adjustment range of 360° by rotating the phase reverser for 180°. Due to the symmetrical characteristics, its position after rotating 180° is the same as the initial position, which can achieve continuous phase adjustment and avoid phase mutation. Simulation results indicate that the phase shifter achieves the transmission efficiency greater than 99.90% at a center frequency of 8.4 GHz, and the bandwidth of transmission efficiency greater than 98.00% is up to 50 MHz. Experiments are carried out and the measured results are in good agreement with simulation. To sum up, the power capacity of this phase shifter is estimated to be more than 80 MW under vacuum conditions (<10-3 Pa), and it can be applied to fast continuous high-power beam-steerable antenna arrays or mode conversion systems.
ABSTRACT
A three-layer aperture coupled microstrip antenna array (ACMA) is designed and fabricated for wideband high-power microwave (HPM) application, which has not been reported in the field of HPM. In this paper, the proposed antenna array overcomes the disadvantage of low power capacity of traditional microstrip antenna arrays. Moreover, based on the H-shaped aperture coupled structure, it enhances the relative bandwidth up to more than 50%. Compared with traditional HPM antennas, it has advantages of being low-profile (less than 0.2λ), wideband, lightweight, and easy to manufacture. The proposed antenna array consists of 60 elements; each element has four aperture coupled patch antennas fed by a four-way microstrip line power divider. In order to realize the modular design, the antenna array is divided into 10 identical modules; benefiting from this design, machining and assembling become easier. Additionally, cold tests and high-power tests are carried out, and the experimental results show that the ACMA achieves a relative bandwidth of 51.2% for voltage standing-wave ratio < 2 from 1.52 to 2.57 GHz. Consistent with simulation results, the measured gain is more than 28.8 dB in the whole bandwidth and it reaches a maximum of 32.1 dB. Finally, the high-power tests show that the power capacity of the proposed ACMA is greater than 140 MW, which proves the feasibility of the design in wideband HPM application.
ABSTRACT
A novel compact E-shaped wideband planar antenna array (CEWPA) is designed and fabricated for high-power microwave (HPM) application. The CEWPA is a kind of planar antenna and it has a lot of advantages such as low profile, wideband, high efficiency, easy to manufacture, and light weight. Compared with traditional planar antenna arrays, it overcomes the disadvantage of low power capacity through special metal structure designs. The CEWPA consists of 60 antenna elements and achieved miniaturization by an innovative array layout. In addition, it has reached a relative bandwidth of 33% (VSWR < 2) at a center frequency of 2.1 GHz in simulation and over 20% in experiment. On the other hand, the measured gain at the cold test is greater than 20 dB in the whole bandwidth while the radiation patterns are in agreement with the simulation. In addition, excited by nanosecond level pulses, the power capacity of the whole system is more than 140 MW in a high-power test.
ABSTRACT
Experimental investigation of the transparent cathode used in a relativistic magnetron with axial radiation is reported in this paper. The transparent cathode is composed of six separate stalks with the diameter of 6 mm. Under the working condition of 549 kV and â¼0.38 T, the relativistic magnetron with the transparent cathode experimentally produces a 550 MW microwave. The radiation mode is TE(11) at the frequency of 2.35 GHz. The total efficiency is 16.7%. The variations of the relative positions between the separate stalks and the anode blocks can perform the maximum difference of 4 ns in microwave duration. Compared with the conventional solid cathode, the transparent cathode provides faster startup time of 12 ns, relatively wider pulse duration of 35% and relatively higher efficiency of 10.6%.
ABSTRACT
The improved magnetically insulated transmission line oscillator (MILO) is a gigawatt-class L-band high power microwave tube driven by a 550 kV, 57 kA, 50 ns electron beam. It has allowed us to generate 2.4 GW pulse of 22 ns duration. The recent progress of the improved MILO is presented in this paper. First, a field shaper cathode is introduced into the improved MILO to avoid the cathode flares in the triple point region. The experimental results show that the cathode flares are avoided, so the lifetime of the velvet cathode is longer than that of the taper cathode. Furthermore, the shot-to-shot reproducibility is better than that of the taper cathode. Second, In order to prolong the pulse duration and increase the radiated microwave power, a self-built 600 kV, 10 Omega, 80 ns pulser: SPARK-03 is employed to drive the improved MILO. Simulation and experimental investigation are performed. In simulation, when the improved MILO is driven by a 600 kV, 57 kA electron beam, high-power microwave is generated with output power of 4.15 GW, frequency of 1.76 GHz, and relevant power conversion efficiency of 12.0%. In experiments, when the diode voltage is 550 kV and current is 54 kA, the measured results are that the radiated microwave power is above 3.1 GW, the pulse duration is above 40 ns, the microwave frequency is about 1.755 GHz, and the power conversion efficiency is about 10.4%.
