ABSTRACT
We investigated the bipolar resistive switching (BRS) properties of Mn-doped NiO thin films by sol-gel spin-coating. As the Mn doping concentration increased, lattice constant, grain size and band gap were found to decrease simultaneously. Moreover, the electroforming voltages and threshold voltages were gradually reduced. It can be ascribed to the increase in the density of grain boundaries, and the defects caused by doping Mn and lower formation energy of Mn-O. They would be helpful for the formation of oxygen vacancies and conductive filaments. It is worth mentioning that excellent BRS behaviors can be obtained at a low Mn-doped concentration including enlarged ON/OFF ratio, good uniformity and stability. Compared with other samples, the 1% Mn-doped NiO showed the highest ON/OFF ratio (>106), stable endurance of >100 cycles and a retention time of >104 s. The mechanism should be determined by bulk properties rather than the dual-oxygen reservoir structure. These results indicate that appropriate Mn doping can be applied to improve the BRS characteristics of NiO thin films, and provide stable, low-power-consumption memory devices.
ABSTRACT
This paper reports an abnormal coexistence of different resistive switching behaviors including unipolar (URS), bipolar (BRS), and threshold switching (TRS) in an Al/NiO/indium tin oxide (ITO) structure fabricated by chemical solution deposition. The switching behaviors have been strongly dependent on compliance current (CC) and switching processes. It shows reproducible URS and BRS after electroforming with low and high CC of 1 and 3 mA, respectively, which is contrary to previous reports. Furthermore, in the case of high-forming CC, TRS is observed after several switching cycles with a low-switching CC. Analysis of current-voltage relationship demonstrates that Poole-Frenkel conduction controlled by localized traps should be responsible for the resistance switching. The unique behaviors can be dominated by Joule heating filament mechanism in the dual-oxygen reservoir structure composed of Al/NiO interfacial layer and ITO. The tunable switching properties can render it flexible for device applications.
