Correction for isotopic interferences between analyte and internal standard in quantitative mass spectrometry by a nonlinear calibration function.

Stable isotope-labeled internal standards are of great utility in providing accurate quantitation in mass spectrometry (MS). An implicit assumption has been that there is no "cross talk" between signals of the internal standard and the target analyte. In some cases, however, naturally occurring isotopes of the analyte do contribute to the signal of the internal standard. This phenomenon becomes more pronounced for isotopically rich compounds, such as those containing sulfur, chlorine, or bromine, higher molecular weight compounds, and those at high analyte/internal standard concentration ratio. This can create nonlinear calibration behavior that may bias quantitative results. Here, we propose the use of a nonlinear but more accurate fitting of data for these situations that incorporates one or two constants determined experimentally for each analyte/internal standard combination and an adjustable calibration parameter. This fitting provides more accurate quantitation in MS-based assays where contributions from analyte to stable labeled internal standard signal exist. It can also correct for the reverse situation where an analyte is present in the internal standard as an impurity. The practical utility of this approach is described, and by using experimental data, the approach is compared to alternative fits.

Liquid chromatography tandem mass spectrometry for analysis of steroids in clinical laboratories.

Liquid chromatography tandem mass spectrometry is one of the most specific techniques available in clinical laboratories. In the past, immunoassays were the primary methodology for analysis of steroids in biological samples because they are rapid and easy to perform. However, these methods were shown to suffer from the lack of specificity for measuring many of the diagnostically important steroids. LC-MS/MS overcomes many of the limitations of immunoassays, enhances diagnostic utility of the testing, and expands diagnostic capabilities in endocrinology. In addition to the superior quality of the measurements, LC-MS/MS allows high throughput testing using small sample volume with minimal sample preparation, and frees the laboratory from dependence on suppliers of assay specific reagents. LC-MS/MS is being widely employed for routine measurement of steroids, and the methodology plays an important role in the standardization and harmonization of measurements among clinical laboratories.

A cellular model to mimic exhaled cigarette smokeinduced lung microvascular endothelial cell injury and death.

Tobacco smoke exhaled from smokers is a key component of secondhand smoke, contributing to lung alveolar wall destruction seen in chronic lung diseases. Although mainstream and sidestream tobacco smoke are cyto-toxic to lung cells, it is unclear whether exhaled smoke induces lung cell injury or even death. We sought to establish an in vitro model to examine the effects of exhaled smoke on lung cells. Phosphate-buffered saline-conditioned cigarette smoke (CCS) derived from a blow-by system was used to mimic exhaled tobacco smoke exposure. Exposure of medium to CCS leads to dose-dependent increases in nicotine/cotinine levels. Scanning spectrophotometric analysis of the CCS-exposed medium reveals an absorption peak at 290 nm wavelength. The OD values at 290 nm are correlated with nicotine levels in the exposed medium, indicating that a simple measurement of OD at 290 nm can be used to monitor CCS exposure. Tobacco smoke contacts the microvascular endothelium located at lung alveoli, before it enters the blood stream. Hence, human lung microvascular endothelial cells (hMVEC) were exposed to CCS and assessed for cell injury and death. Exposure of hMVEC to CCS equivalent to burning 12-16 cigarettes leads to increased LDH release from the cells into the medium. This suggests that CCS can induce lung cell injury. CCS at a low level increases cell growth, whereas the high level of CCS decreases cell viability. In addition, CCS exposure induces cell detachment and morphological changes. Our results demonstrate that exposure of buffer-conditioned mainstream cigarette smoke leads to increased nicotine/cotinine levels and cell injury/death, which may contribute to the pathophysiology of passive smoking-associated lung diseases.

Liquid chromatography-tandem mass spectrometry assay for androstenedione, dehydroepiandrosterone, and testosterone with pediatric and adult reference intervals.

BACKGROUND: Measurement of serum androgens is important in adult, geriatric, pediatric endocrinology, and oncology patients. We developed a liquid chromatography-tandem mass spectrometry (LC-MS/MS) assay for simultaneous measurement of androstenedione, dehydroepiandrosterone (DHEA), and testosterone in these patients. METHODS: We spiked 200 muL of serum or plasma with isotope-labeled internal standards and performed extraction with methyl t-butyl ether. We then derivatized the extracts with hydroxylamine and analyzed them by LC-MS/MS using a 2-dimensional chromatographic separation with a 3.5-min analysis time. RESULTS: Total imprecision for each analyte was <11.2%. Limits of quantification were 10, 50, and 10 ng/L for androstenedione, DHEA, and testosterone, respectively. Reference intervals were established for children (age 6 months to 17 years), men, and women. Androstenedione and DHEA concentrations were lowest in 2- to 3-year-old children. Adult concentrations were achieved in girls at Tanner stage 3 and in boys at Tanner stage 4-5. In premenopausal and (postmenopausal) women the median concentrations of androstenedione, DHEA, and testosterone were 810 (360), 3000 (1670), 270 (180) ng/L, respectively. In postmenopausal women, concentrations of testosterone were age independent, whereas androstenedione and DHEA concentrations decreased with age. In men the median concentrations of androstenedione, DHEA, and testosterone were 440, 2000, and 3700 ng/L, respectively. In men older than 40 years, median concentrations decreased at rates of 5%, 10%, and 20% per decade for androstenedione, DHEA, and testosterone, respectively. CONCLUSIONS: This LC-MS/MS method has the required lower limit of quantification and specificity for analysis of endogenous concentrations of androgens in all groups studied. Reference intervals were established for healthy children and adults.

High sensitivity measurement of estrone and estradiol in serum and plasma using LC-MS/MS.

Measurement of low concentrations of estrogens, encountered in pre-pubertal children, men, and postmenopausal women, is important for numerous clinical applications. We describe a method for high sensitivity analysis of estrogens that uses two-dimensional chromatographic separation and tandem mass spectrometry detection. Aliquots of serum or plasma samples are combined with stable isotope-labeled internal standard and estrogens are extracted with methyl t-butyl ether. The solvent is evaporated, estrogens derivatized to form dansyl derivatives, and the samples are analyzed. Quantitation is performed using triple quadrupole mass spectrometer equipped with electrospray ion source using positive ion mode ionization and multiple reaction monitoring acquisition.

Quantitation of nicotine, its metabolites, and other related alkaloids in urine, serum, and plasma using LC-MS-MS.

We describe a method for the quantitative analysis of nicotine, cotinine, trans-3'-hydroxy cotinine, nornicotine, and anabasine in urine, serum, and plasma using liquid chromatography-tandem mass spectrometry. A mix of deuterium-labeled internal standards (IS) is added to a specimen aliquot. The aliquot is extracted using mixed-mode solid phase extraction and eluted into an autosampler vial for injection into an LC-MS-MS system. An Atlantis silica column is used for LC separation in hydrophilic interaction mode. Tandem mass spectrometry detection is performed in positive ion mode with electrospray ionization and two multiple reaction monitoring (MRM) transitions monitored for each analyte and IS.

High-sensitivity tandem mass spectrometry assay for serum estrone and estradiol.

High-sensitivity measurement of serum estrogens is important in adult and pediatric endocrinology and oncology. We developed a high-sensitivity liquid chromatography-tandem mass spectrometry (LC-MS/MS) assay for simultaneous measurement of estrone (E1) and estradiol (E2). Aliquots of 200 muL of serum were spiked with internal standard, extracted, derivatized with dansyl chloride, and analyzed by LC-MS/MS using 2-dimensional chromatographic separation. Total imprecision for the method was less than 11%; the limit of quantitation was 1 pg/mL. Reference intervals were established with samples from more than 900 healthy postmenopausal women, men, girls, and boys. Concentrations of estrogens in children reached adult levels by Tanner stage 3. In men and postmenopausal women, the median concentrations of total estrogens (E1 + E2) were 39 and 22 pg/mL, and the median E2/E1 ratios were 0.98 and 0.55, respectively. The method requires a small sample volume and has adequate sensitivity and specificity for analyzing estrogens in samples from postmenopausal women, men, and children.

Choline in whole blood and plasma: sample preparation and stability.

BACKGROUND: Choline is critical for a variety of biological functions and has been investigated as a biomarker for various pathological conditions including acute coronary syndrome. METHODS: A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was used to quantify choline in whole blood and plasma in freshly collected samples prepared with ultrafiltration or protein precipitation. We investigated the effects of preanalytical variables including types of anticoagulants and storage temperature and time. RESULTS: We observed no significant differences in whole-blood choline concentration in EDTA-anticoagulated vs heparin-anticoagulated samples: mean (SD) difference 0.9% (3.2%), P = 0.80. For plasma, choline concentrations with heparin in 5 of 12 volunteers were >10% higher than with EDTA, P = 0.01. One freeze-thaw cycle led to significant mean (SD) increases in choline concentrations in heparin whole blood, 19.3% (11.4%), P <0.01, and the effect was not significant for other sample types studied (P >0.33). For freshly collected samples stored at ambient temperature, choline concentrations in all types of samples increased with storage time. For EDTA whole blood, EDTA plasma, and heparin plasma, the choline concentration increased for the first 60 min and then stabilized. For heparin whole blood, the choline concentration continued to increase linearly with storage time for >4 h, at which time the choline concentrations were increased by approximately 50%. CONCLUSIONS: Sample collection, storage, and sample preparation procedures are critical for clinical measurements of choline in whole blood and plasma.

Free thyroid hormones in serum by direct equilibrium dialysis and online solid-phase extraction--liquid chromatography/tandem mass spectrometry.

BACKGROUND: Measurements of free thyroxine (FT4) and free triiodothyronine (FT3) are important for the diagnosis and monitoring of thyroid diseases. Considerable differences among methods limit their clinical utility, however, and accurate methods are needed for various clinical specimens. We describe a direct equilibrium dialysis (ED)-liquid chromatography (LC)/tandem mass spectrometry (MS/MS) method for FT4 and FT3. METHODS: ED was selected as the separation step. Serum samples were dialyzed 1:1 against a simple protein-free buffer for 20 h at 37 degrees C. Thyroid hormones in dialysates were purified by online solid-phase extraction (SPE), then chromatographically separated and quantified in positive ion and multiple reaction monitoring modes. RESULTS: For FT4 and FT3, the lower and upper limits of quantification were 1 ng/L (pg/mL) and 400 ng/L with total imprecision <10%. The method correlated well with an ED-RIA, 2 direct immunoassay methods for FT4, and 1 direct immunoassay and 1 tracer dialysis method for FT3. The adult reference intervals were 12.8-22.2 ng/L for FT4 and 3.62-6.75 ng/L for FT3. Reference intervals for the second trimester of pregnancy (14-20 weeks of gestation) were also established. CONCLUSIONS: We developed a simple protein-free buffer and ED procedure. The performance characteristics and high throughput of the LC-MS/MS method with online SPE for FT4 and FT3 (also reverse T3) are sufficient for the intended clinical use.

New interface plate for microspray ionization mass spectrometry.

A new interface plate was employed in microspray ionization mass spectrometry (microESI-MS) to improve ion transmission from the sprayer into the sampling nozzle of the mass spectrometer at atmospheric pressure. Using a time-of-flight mass spectrometer (TOFMS), a fivefold increase in ion intensity and a sevenfold reduction in method detection limit were observed. The interface plate attenuated the dependence of the ion intensity on the sprayer position. Even when the distance between the sprayer tip and sampling nozzle was 15.0 mm, ion signals were still stronger than when the sprayer tip was positioned 3.0 mm in front of the sampling nozzle with the original interface plate. This enhancement in the performance of microESI-MS was due to the improved shapes of the equipotential lines near the sprayer tip and the long desolvation distance between the sprayer and the sampling nozzle of the MS.

Electron ionization in superimposed magnetic and radio frequency quadrupolar electric fields.

An improved design of a novel electron ionization source for orthogonal acceleration time-of-flight mass spectrometry is described, based on the superimposition of an axial magnetic field with cylindrical symmetry around a radio frequency-only quadrupole. A tubular permanent magnet was designed to generate the required strong magnetic field and field profile. An axial electric field along the ion guide for efficient ion extraction was introduced using segmented quadrupole rods. Details of the source design and the effects of various operating parameters are described. The source produces high-quality mass spectra with regard to fragmentation, relative abundances, and isotopic ratios. Preliminary results have shown excellent sensitivity, with limits of detection in the subfemtogram range (octafluoronaphthalene, full spectrum acquisition) in gas chromatography/mass spectrometry operation.

Superimposition of a magnetic field around an ion guide for electron ionization time-of-flight mass spectrometry.

A new electron ionization source was developed for orthogonal acceleration time-of-flight mass spectrometry (TOFMS) based on the superimposition of a magnetic field around a radio frequency-only (rf-only) ion guide. The cylindrically symmetric magnetic field compresses the electron beam from the electron source into a long narrow volume along the ion guide axis. The magnetic field also helps to maintain a narrow energy distribution of electrons that penetrate the full length of the ion guide despite the influence of the radial rf field. Ionization occurs inside the ion guide with improved efficiency resulting from efficient use of electrons, prolonged interaction time, and nontraditionally large ionization volume. At the same time, the rf field effectively focuses ions radially and confines them to the axis of the ion guide by collisional focusing, leading to high ion transmission efficiency. Furthermore, the source can also be operated in a trap-and-pulse mode to improve the ion sampling duty cycle of orthogonal acceleration TOFMS. To validate the design concept of this new ion source, a simple prototype using a single set of cylindrical rods was constructed and retrofitted to an orthogonal acceleration TOFMS. A significant increase in ion signal intensity was observed by operating the source in a pulsed ion extraction mode. Low detection limits (for example, 12 fg for toluene) were determined at 12.5 spectra s(-1) in the full spectrum mode.

Assessing analytical specificity in quantitative analysis using tandem mass spectrometry.

OBJECTIVES: The necessity of confirmation of compound identity in quantitative analysis is well recognized for methods utilizing single mass spectrometry detection but is not commonly addressed for applications utilizing multiple-stage mass spectrometry (MSn). For MSn detection, no commonly accepted rules for assessment of analytical specificity in quantitative analyses have been established to date. METHODS: To assure compound identity, we evaluated approaches based on monitoring multiple mass transitions of a target compound followed by comparison of the branching ratios of the mass transitions. RESULTS: Monitoring multiple mass transitions along with evaluation of the ratio of their relative intensities allows the analyst to distinguish the target analyte from interferences in quantitative analysis. The strategy and the acceptance criteria are compound and method specific and should be established during the method development and validation. CONCLUSIONS: The certainty of analyte identity is very important in quantitative analysis using MSn detection; methods to verify analyte identity should be used in all critical applications.

Mobility-based selective on-line preconcentration of proteins in capillary electrophoresis by controlling electroosmotic flow.

A simple method to perform selective on-line preconcentration of protein samples in capillary electrophoresis (CE) is described. The selectivity, based on protein electrophoretic mobility, was achieved by controlling electroosmotic flow (EOF). A short section of dialysis hollow fiber, serving as a porous joint, was connected between two lengths of fused silica capillary. High voltage was applied separately to each capillary, and the EOF in the system was controlled independently of the local electric field intensity by controlling the total voltage drop. An equation relating the EOF with the total voltage drop was derived and evaluated experimentally. On-line preconcentration of both positively charged and negatively charged model proteins was demonstrated without using discontinuous background electrolytes, and protein analytes were concentrated by approximately 60-200-fold under various conditions. For positively charged proteins, positive voltages of the same magnitude were applied at the free ends of the connected capillaries while the porous joint was grounded. This provided a zero EOF in the system and a non-zero local electric field in each capillary to drive the positively charged analytes to the porous joint. CE separation was then initiated by switching the polarity of the high voltage over the second capillary. For negatively charged proteins, the procedure was the same except negative voltages were applied at the free ends of the capillaries. Mobility-based selective on-line preconcentration was also demonstrated with two negatively charged proteins, i.e. beta-lactoglobulin B and myoglobin. In this case, negative voltages of different values were applied at the free ends of the capillaries with different values, which provided a non-zero EOF in the system. The direction of EOF was the same as that of the electrophoretic migration velocities of the protein analytes in the first capillary and opposite in the second capillary. By controlling the EOF, beta-lactoglobulin B, which has a higher mobility, could be concentrated over 150-fold with a 15 min injection while myoglobin, which has a lower mobility, was eliminated from the system.

Incorporation of a venturi device in electrospray ionization.

Electrospray ionization has grown to be one of the most commonly used ionization techniques for mass spectrometry, and efforts continue to improve its performance. Typically, the sprayer tip must be very close to the entrance orifice of the mass spectrometer in order to maximize the conduction of ions from the sprayer into the mass spectrometer. However, because of space-charge repulsion, most ions never reach the sampling orifice. In this work, an industrial air amplifier, for which the working mechanism is based on venturi and coanda effects, was added between an electrospray ionization source and a time-of-flight mass spectrometer. When a series of reserpine solutions (0.5, 1.0, 5.0, and 10.0 microM) were monitored using mass spectrometry, an over 5-fold increase in m/z 609.3 ion intensity was measured for a separation distance of 14 mm between the electrospray tip and interface capillary inlet, as compared to when the electrospray tip was in its normal position 1 mm in front of the inlet without the amplifier. When a voltage was applied to the air amplifier to further assist in focusing the electrosprayed ions, an approximately 18-fold increase in m/z 609.3 ion intensity was obtained. In addition, a 34-fold reduction in method detection limit was observed.

Application of diaza-18-crown-6-capped beta-cyclodextrin bonded silica particles as chiral stationary phases for ultrahigh pressure capillary liquid chromatography.

Two bonded chiral stationary phases (CSPs), 8-aminoquinoline-2-ylmethyl- and 8-aminoquinoline-7-ylmethyl-diaza-18-crown-6-capped [3-(2-O-beta-cyclodextrin)-2-hydroxypropoxy]propylsilyl silica particles (non-porous, 1.5 microm), have been prepared and evaluated using capillary liquid chromatography at high pressures (> or = 8000 p.s.i.). High column efficiency (up to 400 000 plates m(-1)) was achieved for chiral separations. These CSPs with two recognition sites, i.e. substituted-diaza-18-crown-6 and beta-cyclodextrin combined with high chromatographic efficiency provide good resolution of a variety of enantiomers and positional isomers in relatively short times under reversed-phase conditions. After inclusion of a Ni (II) ion from the mobile phase, the positively charged crown ether-capped beta-cyclodextrin facilitates specific static, dipolar, and host-guest complexation interactions with solutes.

Elevated-temperature ultrahigh-pressure liquid chromatography using very small polybutadiene-coated nonporous zirconia particles.

Capillary columns packed with small diameter particles typically lead to low permeability and long separation times in high-performance liquid chromatography. Ultrahigh pressures (>10,000 p.s.i.; 1 p.s.i. is identical with 6,894.76 Pa) can be used to overcome the limitations that small particles impose. Ultrahigh-pressure liquid chromatography (UHPLC) has demonstrated great potential for high-speed and high-efficiency separations. Decreasing the viscosity of the mobile phase by elevating the temperature could additionally reduce the pressure drop and facilitate the use of longer columns or smaller particles to achieve even higher total plate numbers. For this reason, we investigated the use of elevated temperatures in UHPLC. Water-resistant, flexible heater tape covered with insulation was used to provide the desired heat to the column. Polybutadiene-coated 1 microm nonporous zirconia particles were used because of their chemical stability at elevated temperature. A column efficiency as high as 420,000 plates m(-1) was obtained. The effects of temperature and pressure on the separation of parabens were investigated. Separation of five herbicides was completed in 60 s using 26,000 p.s.i. and 90 degrees C.