Tuning Octahedron Sites of CoV2O4 via Cationic Competition for Efficient Oxygen Evolution Reaction.

Doping transition metal oxide spinels with metal ions represents a significant strategy for optimizing the electronic structure of electrocatalysts. Herein, a bimetallic Fe and Ru doping strategy to fine-tune the crystal structure of CoV2O4 spinel for highly enhanced oxygen evolution reaction (OER) is presented performance. The incorporation of Fe and Ru is observed at octahedral sites within the CoV2O4 structure, effectively modulating the electronic configuration of Co. Density functional theory calculations have confirmed that Fe acts as a novel reactive site, replacing V. Additionally, the synergistic effect of Fe, Co, and Ru effectively optimizes the Gibbs free energy of the intermediate species, reduces the reaction energy barrier, and accelerates the kinetics toward OER. As expected, the best-performing CoVFe0.5Ru0.5O4 displays a low overpotential of 240 mV (@10 mA cm-2) and a remarkably low Tafel slope of 38.9 mV dec-1, surpassing that of commercial RuO2. Moreover, it demonstrates outstanding long-term durability lasting for 72 h. This study provides valuable insights for the design of highly active polymetallic spinel electrocatalysts for energy conversion applications.

Altering electronic structure of nickel foam supported CoNi-based oxide through Al ions modulation for efficient oxygen evolution reaction.

Developing highly active and durable non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER) is crucial in achieving efficient energy conversion. Herein, we reported a CoNiAl0.5O/NF nanofilament that exhibits higher OER activity than previously reported IrO2-based catalysts in alkaline solution. The as-synthesized CoNiAl0.5O/NF catalyst demonstrates a low overpotential of 230 mV at a current density of 100 mA cm-2, indicating its high catalytic efficiency. Furthermore, the catalyst exhibits a Tafel slope of 26 mV dec-1, suggesting favorable reaction kinetics. The CoNiAl0.5O/NF catalyst exhibits impressive stability, ensuring its potential for practical applications. Detailed characterizations reveal that the enhanced activity of CoNiAl0.5O/NF can be attributed to the electronic modulation achieved through Al3+ incorporation, which promotes the emergence of higher-valence Ni metal, facilitating nanofilament formation and improving mass transport and charge transfer processes. The synergistic effect between nanofilaments and porous nickel foam (NF) substrate significantly enhances the electrical conductivity of this catalyst material. This study highlights the significance of electronic structures for improving the activity of cost-effective and non-precious metal-based electrocatalysts for the OER.

Visible-Light-Driven Inactivation of Bacteria and H2 Generation Catalyzed by Oxygen-Vacancy-Rich One-Dimensional/Two-Dimensional W18O49/g-C3N4 Z-Scheme Heterostructures.

Z-scheme heterostructure-based photocatalysts consist of a reduction photocatalyst and an oxidation photocatalyst, enabling them to possess a high capacity for both reduction and oxidation. However, the coupling reaction between photocatalytic H2 generation through water reduction and sterilization using Z-scheme systems has been rarely reported. Herein, 1D W18O49 nanowires embedded over 2D g-C3N4 nanosheets are well-constructed as an integrated Z-scheme heterojunction. Experimental results and density functional theory calculations not only demonstrate the achievement of efficient interfacial charge separation and transport, leading to prolonged lifetime of photogenerated charge carriers, but also directly confirm the mechanism of Z-scheme charge transfer. As expected, the optimized W18O49/g-C3N4 nanostructure exhibits superior photocatalytic sterilization activity against Staphylococcus aureus as well as excellent H2 generation performance under visible-light irradiation (λ ≥ 420 nm). Due to its nontoxic nature, W18O49/g-C3N4 holds great potential in eradicating bacterial infections in living organisms.

Functions of metal-phenolic networks and polyphenol derivatives in photo(electro)catalysis.

Phenolic compounds are ubiquitous in nature because of their unique physical and chemical properties and wide applications, which have received extensive research attention. Phenolic compounds represented by tannic acid (TA) play an important role at the nanoscale. TA with a polyphenol hydroxyl structure can chemically react with organic or inorganic materials, among which metal-phenolic networks (MPNs) formed by coordination with metal ions and polyphenol derivatives formed by interactions with organic matter, exhibit specific properties and functions, and play key roles in photo(electro)catalysis. In this paper, we first introduce the fundamental properties of TA, then summarize the factors influencing the properties of MPNs and structural transformation of polyphenol-derived materials. Subsequently, the functions of MPNs and polyphenol derivatives in photo(electro)catalysis reactions are summarized, encompassing improving interfacial charge carrier separation, accelerating surface reaction kinetics, and enhancing light absorption. Finally, this article provides a comprehensive overview of the challenges and outlook associated with MPNs. Additionally, it presents novel insights into their stability, mechanistic analysis, synthesis, and applications in photo(electro)catalysis.

Al-Incorporated Cobalt-Layered Double Hydroxides for Enhanced Oxygen Evolution through Morphology and Electronic Structure Regulation.

Layered double hydroxides (LDHs) are promising electrocatalytic materials for the oxygen evolution reaction (OER) due to their tunable composition and low cost. Here, we construct ultrathin Al-incorporated Co LDH nanosheets on carbon cloth (CC) by a facile hydrothermal strategy. Compared to Co LDH/CC, the optimized Co2Al1 LDH/CC displays significantly improved OER performance, characterized by low overpotentials of only 171 and 200 mV to reach current densities of 10 mA cm-2 in alkaline and neutral media, respectively, as well as good stability over an extended period. The introduced Al3+ and CC support play a synergistic role in steering the morphology of Co2Al1 LDH/CC while also increasing the electrochemical active sites. X-ray absorption fine spectra (XAFS) analyses uncover the critical role of Al in regulating the coordination environment of Co atoms, with evidence affording highly active Co oxidation states. Moreover, density functional theory (DFT) calculations confirmed that the Al3+ incorporated into Co LDH/CC can efficaciously modulate the electronic density of states of the d-band center of Co atoms, optimize the Gibbs free energies of intermediates toward OER, and thus accelerate the O2 evolution rate.

Facet modulation of nickel-ruthenium nanocrystals for efficient electrocatalytic hydrogen evolution.

Constructing highly active electrocatalysts towards hydrogen evolution reaction (HER) in both alkaline and acidic media is essential for achieving a sustainable energy economy. Here, a facile ethylene glycol reduction strategy was employed to design the nickel-ruthenium nanocrystals (Ni-Ru NC) with an exposed highly active Ru (101) facet as an efficient electrocatalyst for HER. Testings show Ni-Ru NC outperforms the benchmark catalyst Pt/C by delivering extraordinarily low overpotentials of 21.1 and 70.9 mV to drive 10 mA cm-2 in acidic and alkaline solutions, respectively. The results of experimental and theoretical studies suggest that Ni can modulate the electronic structure of the Ru NC and optimize the hydrogen adsorption free energy on Ru's surface, which accelerates the charge transfer kinetics and enhances the HER performance. The study support the potential application of facet-modulated Ru-based HER eleccatalyst in an alkaline environment.

Structural Engineering of BiVO4 /CoFe MOF Heterostructures Boosting Charge Transfer for Efficient Photoelectrochemical Water Splitting.

Boosting charge separation and transfer of photoanodes is crucial for providing high viability of photoelectrochemical hydrogen (H2 ) generation. Here, a structural engineering strategy is designed and synthesized for uniformly coating an ultrathin CoFe bimetal-organic framework (CoFe MOF) layer over a BiVO4 photoanode for boosted charge separation and transfer. The photocurrent density of the optimized BiVO4 /CoFe MOF(NA) photoanode reaches a value of 3.92 mA cm-2 at 1.23 V versus reversible hydrogen electrode (RHE), up to 6.03 times that of pristine BiVO4 , due to the greatly increased efficiency of charge transfer and separation. In addition, this photoanode records one onset potential that is considerably shifted negatively when compared to BiVO4 . Transient absorption spectroscopy reveals that the CoFe MOF(NA) prolongs charge recombination lifetime by blocking the hole-transfer pathway from the BiVO4 to its surface trap states. This work sheds light on boosting charge separation and transfer through structural engineering to enhance the photocurrent of photoanodes for solar H2 production.

Solid-Phase Synthesis of Titanium Dioxide Micro-Nanostructures.

Titanium dioxide (TiO2) micro-nanostructures are widely utilized in photochemical applications due to their unique band gaps and are of huge demand in scientific research and industrial manufacture. Herein, this work reports a controllable, facile, economical, and green solid-phase synthesis strategy to prepare TiO2 with governable morphologies containing 1D nanorods, 3D microbulks, and irregular thick plates. Specifically, Ti powders are transformed into TiO2 micro-nanostructures through dispersing them into a solid NaOH/KOH mixture with a low eutectic point, followed by grinding, heating, ion exchange, and calcination. As no solvents are utilized in the alkali treatment process, the usage of solvents is decreased and high vapor pressure is avoided. Moreover, the band gaps of TiO2 micro-nanostructures can be regulated from 3.02 to 3.34 eV through altering the synthetic parameters. Notably, the as-prepared TiO2 micro-nanostructures exhibit high photocatalytic activities in the degradation of rhodamine B and methylene blue under simulated solar light illumination. It is believed that the solid-phase synthesis strategy will be of huge demand for the synthesis of TiO2 micro-nanostructures.

Constructing Direct Z-Scheme Heterostructure by Enwrapping ZnIn2 S4 on CdS Hollow Cube for Efficient Photocatalytic H2 Generation.

Rational design hybrid nanostructure photocatalysts with efficient charge separation and transfer, and good solar light harvesting ability have critical significance for achieving high solar-to-chemical conversion efficiency. Here a highly active and stable composite photocatalyst is reported by integrating ultrathin ZnIn2 S4 nanosheets on surface of hollow CdS cube to form the cube-in-cube structure. Experimental results combined with density functional theory calculations confirm that the Z-scheme ZnIn2 S4 /CdS heterojunction is formed, which highly boosts the charge separation and transfer under the local-electric-field at semiconductor/semiconductor interface, and thus prolongs their lifetimes. Moreover, such a structure affords the highly enhanced light-harvesting property. The optimized ZnIn2 S4 /CdS nanohybrids exhibit superior H2 generation rate under visible-light irradiation (λ ≥ 420 nm) with excellent photochemical stability during 20 h continuous operation.

In Situ Construction of Bifunctional N-Doped Carbon-Anchored Co Nanoparticles for OER and ORR.

Designing highly active and more durable oxygen electrocatalysts for regenerative metal-air batteries and water splitting is of practical significance. Herein, an advanced Co/N-C-800 catalyst composed of abundant Co-Nx structures and carbon defects derived from cobalt phthalocyanine is synthesized. Remarkably, this catalyst exhibits favorable catalytic performance toward the oxygen evolution reaction (OER) with a receivable overpotential of 274 mV in an alkaline medium achieving a current density of 10 mA cm-2 and a Tafel slope of 43.6 mV decade-1, outperforming the commercial RuO2 catalyst. It further displays a high half-wave potential (0.82 V) for the oxygen reduction reaction in 0.1 M KOH. Theoretical calculations reveal that the Co-Nx active sites along with the carbon defects can decrease the adsorption energy of intermediates (OH*, O*, and OOH*) and enhance the electron-transfer ability, thus boosting the OER process.

Engineering Bimodal Oxygen Vacancies and Pt to Boost the Activity Toward Water Dissociation.

Water dissociation is the rate-limiting step of several energy-related reactions due to the high energy barrier required for breaking the oxygen-hydrogen bond. In this work, a bimodal oxygen vacancy (VO ) catalysis strategy is adopted to boost the efficient water dissociation on Pt nanoparticles. The single facet-exposed TiO2 surface and NiOx nanocluster possess two modes of VO different from each other. In ammonia borane hydrolysis, the highest catalytic activity among Pt-based materials is achieved with the turnover frequency of 618 min-1 under alkaline-free conditions at 298 K. Theoretical simulation and characterization analyses reveal that the bimodal VO significantly promotes the water dissociation in two ways. First, an ensemble-inducing effect of Pt and VO in TiO2 drives the activation of water molecules. Second, an electron promoter effect induced by the electron transfer from VO in NiOx to Pt further enhances the ability of Pt to dissociate water and ammonia borane. This insight into bimodal VO catalysis establishes a new avenue to rationally design heterogeneous catalytic materials in the energy chemistry field.

Hydrogen-Etched Bifunctional Sulfur-Defect-Rich ReS2 /CC Electrocatalyst for Highly Efficient HER and OER.

The design on synthesizing a sturdy, low-cost, clean, and sustainable electrocatalyst, as well as achieving high performance with low overpotential and good durability toward water splitting, is fairly vital in environmental and energy-related subject. Herein, for the first time the growth of sulfur (S) defect engineered self-supporting array electrode composed of metallic Re and ReS2 nanosheets on carbon cloth (referred as Re/ReS2 /CC) via a facile hydrothermal method and the following thermal treatment with H2 /N2 flow is reported. It is expected that, for example, the as-prepared Re/ReS2 -7H/CC for the electrocatalytic hydrogen evolution reaction (HER) under acidic medium affords a quite low overpotential of 42 mV to achieve a current density of 10 mA cm-2 and a very small Tafel slope of 36 mV decade-1 , which are comparable to some of the promising HER catalysts. Furthermore, in the two-electrode system, a small cell voltage of 1.30 V is recorded under alkaline condition. Characterizations and density functional theory results expound that the introduced S defects in Re/ReS2 -7H/CC can offer abundant active sites to advantageously capture electron, enhance the electron transport capacity, and weaken the adsorption free energy of H* at the active sites, being responsible for its superior electrocatalytic performance.

Insights into the interface effect in Pt@BiOI/ZnO ternary hybrid composite for efficient photodegradation of phenol and photogenerated charge transfer properties.

In this work, the ternary hybrid photocatalyst composed of ZnO nanorods with BiOI and Pt NPs (denoted as Pt@BiOI/ZnO) was fabricated by a simple three-step method. The as-prepared samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectrometry (DRS) and X-ray photoelectron spectroscopy (XPS), which proved the strong interaction has occurred among the Pt, BiOI and ZnO. The phenol degradation test showed that the Pt@BiOI/ZnO ternary hybrid composite exhibited the maximum photodegradation efficiency of phenol (99.9%) under UV irradiation within 30 min compared to Pt/BiOI, BiOI/ZnO binary composites as well as Pt/ZnO. Additionally, the transient photovoltage (TPV), steady-state PL spectra and time-resolved PL spectra were used to investigate the possible mechanism for photocatalytic performance. Our results elaborated that the enhanced photocatalyticactivity was mainly attributed to the synergetic effect of Pt/ZnO and BiOI/ZnO interfaces. Conversely, the interfacial interaction of Pt/BiOI is little contribution, indicating that the effective interfaces design is very important for the degradation of phenol in the preparation process of ternary hybrid photocatalyst. These findings will contribute to developing high efficiency photocatalysts for application in environmental remediation.

Cobalt Phosphide Modified Titanium Oxide Nanophotocatalysts with Significantly Enhanced Photocatalytic Hydrogen Evolution from Water Splitting.

Production of hydrogen from photocatalytic water splitting holds promise as an alternative energy source with superiority of cleanliness, environment friendliness, low price, and sustainability. Perfectly constructing the noble-metal-free and stable hybrid structure photocatalyst is quite essential; herein, for the first time the authors aim to use cobalt phosphide as the cocatalyst on titanium oxide to form a novel hybrid structure to enhance the utilization of the photoexcited electrons in redox reactions for improved photocatalytic H2 evolution activity. Thus, the achieved significantly increased photocatalytic H2 -evolution rate on the optimized CoP/TiO2 (8350 µmol h-1 g-1 ) is 11 times higher than that of the pristine TiO2 . Moreover, this work is expected to spur more insight into synthesizing such novel photofunctional systems, achieving high photocatalytic H2 evolution activity and sufficient stability for solar-to-chemical conversion and utilization.

A novel and highly efficient earth-abundant Cu3P with TiO2 "P-N" heterojunction nanophotocatalyst for hydrogen evolution from water.

Semiconductor-based photocatalytic hydrogen (H2) evolution from water is of great importance for solar-to-chemical conversion processes to boost and promote the future hydrogen economy. Here, for the first time, we demonstrate that p-Cu3P coupled with n-TiO2 forms a novel hybrid structure which accelerates electron-hole pair separation and transfer for improved photocatalytic H2-evolution activity. The rate of H2 evolution of the optimized Cu3P/TiO2 (7940 µmol h-1 g-1) is 11 times higher than that of bare TiO2, with an apparent quantum efficiency (AQE) of 4.6%. This work may provide more insight into the synthesis of novel phosphide-based hybrid materials with high photocatalytic H2-evolution activity and sufficient stability for solar-to-chemical conversion and utilization.

Cadmium Sulfide and Nickel Synergetic Co-catalysts Supported on Graphitic Carbon Nitride for Visible-Light-Driven Photocatalytic Hydrogen Evolution.

Design and preparation of noble-metal-free photocatalysts is of great importance for photocatalytic water splitting harvesting solar energy. Here, we report the high visible-light-driven hydrogen evolution upon the hybrid photocatalyst system consisting of CdS nanocrystals and Ni@NiO nanoparticles grown on the surface of g-C3N4. The hybrid system shows a high H2-production rate of 1258.7 µmol h(-1) g(-1) in the presence of triethanolamine as a sacrificial electron donor under visible light irradiation. The synergetic catalytic mechanism has been studied and the results of photovoltaic and photoluminescence properties show that efficient electron transfer could be achieved from g-C3N4 to CdS nanocrystals and subsequently to Ni@NiO hybrid.