Origin of Panchromaticity in Multichromophore-Tetrapyrrole Arrays.

Panchromatic absorbers that have robust photophysical properties enable new designs for molecular-based light-harvesting systems. Herein, we report experimental and theoretical studies of the spectral, redox, and excited-state properties of a series of perylene-monoimide-ethyne-porphyrin arrays wherein the number of perylene-monoimide units is stepped from one to four. In the arrays, a profound shift of absorption intensity from the strong violet-blue (B y and B x) bands of typical porphyrins into the green, red, and near-infrared (Q x and Q y) regions stems from mixing of chromophore and tetrapyrrole molecular orbitals (MOs), which gives multiplets of MOs having electron density spread over the entire array. This reduces the extensive mixing between porphyrin excited-state configurations and the transition-dipole addition and subtraction that normally leads to intense B and weak Q bands. Reduced configurational mixing derives from moderate effects of the ethyne and perylene on the MO energies and a more substantial effect of electron-density delocalization to reduce the configuration-interaction energy. Quantitative oscillator-strength analysis shows that porphyrin intensity is also shifted into the perylene-like green-region absorption and that the ethyne linkers lend absorption intensity. The reduced porphyrin configurational mixing also endows the S1 state with bacteriochlorin-like properties, including a 1-5 ns lifetime.

Repurposing a photosynthetic antenna protein as a super-resolution microscopy label.

Techniques such as Stochastic Optical Reconstruction Microscopy (STORM) and Structured Illumination Microscopy (SIM) have increased the achievable resolution of optical imaging, but few fluorescent proteins are suitable for super-resolution microscopy, particularly in the far-red and near-infrared emission range. Here we demonstrate the applicability of CpcA, a subunit of the photosynthetic antenna complex in cyanobacteria, for STORM and SIM imaging. The periodicity and width of fabricated nanoarrays of CpcA, with a covalently attached phycoerythrobilin (PEB) or phycocyanobilin (PCB) chromophore, matched the lines in reconstructed STORM images. SIM and STORM reconstructions of Escherichia coli cells harbouring CpcA-labelled cytochrome bd 1 ubiquinol oxidase in the cytoplasmic membrane show that CpcA-PEB and CpcA-PCB are suitable for super-resolution imaging in vivo. The stability, ease of production, small size and brightness of CpcA-PEB and CpcA-PCB demonstrate the potential of this largely unexplored protein family as novel probes for super-resolution microscopy.

Augmenting light coverage for photosynthesis through YFP-enhanced charge separation at the Rhodobacter sphaeroides reaction centre.

Photosynthesis uses a limited range of the solar spectrum, so enhancing spectral coverage could improve the efficiency of light capture. Here, we show that a hybrid reaction centre (RC)/yellow fluorescent protein (YFP) complex accelerates photosynthetic growth in the bacterium Rhodobacter sphaeroides. The structure of the RC/YFP-light-harvesting 1 (LH1) complex shows the position of YFP attachment to the RC-H subunit, on the cytoplasmic side of the RC complex. Fluorescence lifetime microscopy of whole cells and ultrafast transient absorption spectroscopy of purified RC/YFP complexes show that the YFP-RC intermolecular distance and spectral overlap between the emission of YFP and the visible-region (QX) absorption bands of the RC allow energy transfer via a Förster mechanism, with an efficiency of 40±10%. This proof-of-principle study demonstrates the feasibility of increasing spectral coverage for harvesting light using non-native genetically-encoded light-absorbers, thereby augmenting energy transfer and trapping in photosynthesis.

Tuning the Electronic Structure and Properties of Perylene-Porphyrin-Perylene Panchromatic Absorbers.

Light-harvesting architectures that afford strong absorption across the near-ultraviolet to near-infrared region, namely, panchromatic absorptivity, are potentially valuable for capturing the broad spectral distribution of sunlight. One previously reported triad consisting of two perylene monoimides strongly coupled to a free base porphyrin via ethyne linkers (FbT) shows panchromatic absorption together with a porphyrin-like S1 excited state albeit at lower energy than that of a typical monomeric porphyrin. Here, two new porphyrin-bis(perylene) triads have been prepared wherein the porphyrin bears two pentafluorophenyl substituents. The porphyrin is in the free base (FbT-F) or zinc chelate (ZnT-F) forms. The zinc chelate (ZnT) of the original triad bearing nonfluorinated aryl rings also was prepared. The triads were characterized using static and time-resolved optical spectroscopy. The results were analyzed with the aid of molecular-orbital characteristics obtained using density functional theory calculations. Of the four triads, FbT is the most panchromatic in affording the most even distribution of absorption spectral intensity as well as exhibiting the largest wavelength span (380-750 nm). The triads exhibit fluorescence yields (0.35 for FbT-F in toluene) that are substantially greater than for the porphyrin benchmarks (0.049 for FbP-F). The singlet excited-state lifetimes (τS) for the triads in toluene decrease in the order FbT-F (2.7 ns) > FbT (2.0 ns) > ZnT (1.2 ns) ∼ ZnT-F (1.1 ns). The τS values in benzonitrile are FbT (1.3 ns) > FbT-F (1.2 ns) > ZnT-F (0.6 ns) > ZnT (0.2 ns). Thus, the free base triads exhibit relatively long (1.2-2.7 ns) excited-state lifetimes in both polar and nonpolar media. The combined photophysical characteristics indicate that FbT and FbT-F are the best choices for panchromatic light-harvesting systems. Collectively, the findings afford insights into the effects of electronic structure on the panchromatic behavior of ethynyl-linked porphyrin-perylene architectures that can help guide next-generation designs and utilization of these systems.

Effects of substituents on synthetic analogs of chlorophylls. Part 4: How formyl group location dictates the spectral properties of chlorophylls b, d and f.

Photosynthetic organisms are adapted to light characteristics in their habitat in part via the spectral characteristics of the associated chlorophyll pigments, which differ in the position of a formyl group around the chlorin macrocycle (chlorophylls b, d, f) or no formyl group (chlorophyll a). To probe the origin of this spectral tuning, the photophysical and electronic structural properties of a new set of synthetic chlorins are reported. The zinc and free base chlorins have a formyl group at either the 2- or 3-position. The four compounds have fluorescence yields in the range 0.19-0.28 and singlet excited-state lifetimes of ca 4 ns for zinc chelates and ca 8 ns for the free base forms. The photophysical properties of the 2- and 3-formyl zinc chlorins are similar to those observed previously for 13-formyl or 3,13-diformyl chlorins, but differ markedly from those for 7-formyl analogs. Molecular-orbital characteristics obtained from density functional theory (DFT) calculations were used as input to spectral simulations employing the four-orbital model. The analysis has uncovered the key changes in electronic structure engendered by the presence/location of a formyl group at various macrocycle positions, which is relevant to understanding the distinct spectral properties of the natural chlorophylls a, b, d and f.

Panchromatic absorbers for solar light-harvesting.

A set of panchromatic absorbers exhibiting long excited-state lifetimes in both polar and nonpolar media has been prepared. The architectures are based on a porphyrin strongly coupled electronically to 1-4 perylene-monoimides via ethyne linkers. The constructs should find utility in molecular solar-conversion systems.

In vivo, transcutaneous glucose sensing using surface-enhanced spatially offset Raman spectroscopy: multiple rats, improved hypoglycemic accuracy, low incident power, and continuous monitoring for greater than 17 days.

This paper presents the latest progress on quantitative, in vivo, transcutaneous glucose sensing using surface enhanced spatially offset Raman spectroscopy (SESORS). Silver film over nanosphere (AgFON) surfaces were functionalized with a mixed self-assembled monolayer (SAM) and implanted subcutaneously in Sprague-Dawley rats. The glucose concentration was monitored in the interstitial fluid of six separate rats. The results demonstrated excellent accuracy and consistency. Remarkably, the root-mean-square error of calibration (RMSEC) (3.6 mg/dL) and the root-mean-square error of prediction (RMSEP) (13.7 mg/dL) for low glucose concentration (<80 mg/dL) is lower than the current International Organization Standard (ISO/DIS 15197) requirements. Additionally, our sensor demonstrated functionality up 17 days after implantation, including 12 days under the laser safety level for human skin exposure with only one time calibration. Therefore, our SERS based sensor shows promise for the challenge of reliable continuous glucose sensing systems for optimal glycemic control.

Transcutaneous glucose sensing by surface-enhanced spatially offset Raman spectroscopy in a rat model.

This letter presents the first quantitative, in vivo, transcutaneous glucose measurements using surface enhanced Raman spectroscopy (SERS). Silver film over nanosphere (AgFON) surfaces were functionalized with a mixed self-assembled monolayer (SAM) and implanted subcutaneously in a Sprague-Dawley rat. The glucose concentration was monitored in the interstitial fluid. SER spectra were collected from the sensor chip through the skin using spatially offset Raman spectroscopy (SORS). The combination of SERS and SORS is a powerful new approach to the challenging problem of in vivo metabolite and drug sensing.

Progress toward an in vivo surface-enhanced Raman spectroscopy glucose sensor.

BACKGROUND: In this report, we detail our current work towards developing a surface-enhanced Raman spectroscopy (SERS) based sensor for in vivo glucose detection. Despite years of innovations in the development of blood glucose monitors, there remains a need for accurate continuous glucose sensors to provide care to rising numbers of diagnosed diabetes patients and mitigate secondary health complications associated with this metabolic disorder. METHODS: SERS is a highly specific and sensitive optical technique suitable for direct detection of glucose. The SERS effect is highly distance dependent, thus the glucose molecules need to be within a few nanometers or adsorbed to an SERS-active surface. In our sensor, this is achieved with a self-assembled monolayer (SAM) that facilitates reversible interactions between glucose molecules and the surface. The amount of glucose near the surface is proportional to its concentration in the surrounding environment. RESULTS: We determined that the SAM-functionalized surface is stable for at least 10 days and provides rapid, reversible partitioning. In vitro experiments in bovine plasma as well as in vivo experiments in rats demonstrated quantitative detection. CONCLUSIONS: We show successful use of the SERS glucose sensor in rats, making it the first in vivo SERS sensor. Furthermore, we demonstrate free space transdermal detection of a SERS signal through the rat's skin as an initial step toward developing a transcutaneous sensor.

In vivo glucose measurement by surface-enhanced Raman spectroscopy.

This paper presents the first in vivo application of surface-enhanced Raman scattering (SERS). SERS was used to obtain quantitative in vivo glucose measurements from an animal model. Silver film over nanosphere surfaces were functionalized with a two-component self-assembled monolayer, and subcutaneously implanted in a Sprague-Dawley rat such that the glucose concentration of the interstitial fluid could be measured by spectroscopically addressing the sensor through an optical window. The sensor had relatively low error (RMSEC = 7.46 mg/dL (0.41 mM) and RMSEP = 53.42 mg/dL (2.97 mM).