ABSTRACT
Narrowband thermal emission at high temperatures is required for various thermal energy systems. However, the large lossy energy of refractory metals induces a broad bandwidth emission. Here, we demonstrated a two-dimensional (2D) superlattice microcavity array on refractory metals to control the emission bandwidth. A hybrid resonance mode was obtained by coupling the standing-wave modes and propagating surface-wave modes. The bandwidth emission was controlled by varying the superlattice microcavity array resulting from the change in electric field (E-field) concentration. The quality factor (Q-factor) improved by more than 3 times compared to that of a single-lattice array. A narrower band emission originating from the hybrid mode was observed and analyzed experimentally. This novel surface-relief microstructure method can be used to control the emission bandwidth of thermal emitters used in thermophotovoltaic (TPV) systems and other high-temperature thermal energy systems.
ABSTRACT
Thermal radiation management remains a challenge because of the incoherent and isotropic nature of electromagnetic waves. In this study, a multiband and angular-selective infrared emitter, consisting of a simple one-dimensional (1D) metal-dielectric-metal metamaterial, is demonstrated. Although this structure has been well known as spectrally selective emitters, we analytically reveal that when the dielectric layer thickness is much smaller than the wavelength of interest (< 1/10), directive emission at nearly equal to the grazing angles (> 80°) can be obtained at multiple resonant wavelengths. As the absorption peaks can be entirely characterized by geometrical parameters, this angular selective technology offers flexible control of thermal radiation and can be adjusted to specific applications.
ABSTRACT
For effective photon conversion in solar-thermophotovoltaic (TPV) systems, an enclosed-space confined emitter system is proposed, and its power generation potential is demonstrated. A cuboid monolithic absorber/emitter is applied for higher extraction efficiency without dead areas. An analysis using an enclosed space shows a 4.1% higher absolute system efficiency than that using a planar absorber/emitter system. In the experiment, system efficiency reaches 7.0%, which is obtained after multiplying the power measured from one cell by five. A system efficiency more than 20% is achievable by further improvement with a back surface reflecting TPV cells and a perfectly enclosed space.
ABSTRACT
Metamaterials are intriguing candidates for energy conversion systems, and contribute to the control of thermal radiation spectra. Large-scale devices are required to provide high energy flux transfer. However, the surface microstructure of large-scale metamaterials suffers from fabrication defects, inducing optical property degradation. We develop a novel approach to quantitatively evaluate the optical properties of defective 2D metamaterials based on diffraction imaging. The surrogate surface structure is reconstructed from diffraction pattern, and analyzed geometrical features to evaluate the optical properties. This approach shows potential for in-line and real-time continuous diagnosis during industrial fabrication, and high-throughput for large-scale 2D metamaterial.
ABSTRACT
Optical rectennas are expected to be applied as power sources for energy harvesting because they can convert a wide range of electromagnetic waves, from visible light to infrared. The critical element in these systems is a diode, which can respond to the changes in electrical polarity in the optical frequency. By considering trade-off relationship between current density and asymmetry of IV characteristic, we reveal the efficiency limitations of MIM diodes for the optical rectenna and suggest a novel tunnel diode using a double insulator with an oxygen-non-stoichiometry controlled homointerface structure (MOx/MOx-y). A double-insulator diode composed of Pt/TiO2/TiO1.4/Ti, in which a natural oxide layer of TiO1.4 is formed by annealing under atmosphere. The diode has as high-current-density of 4.6 × 106 A/m2, which is 400 times higher than the theoretical one obtained using Pt/TiO2/Ti MIM diodes. In addition, a high-asymmetry of 7.3 is realized simultaneously. These are expected to increase the optical rectenna efficiency by more than 1,000 times, compared to the state-of-the art system. Further, by optimizing the thickness of the double insulator layer, it is demonstrated that this diode can attain a current density of 108 A/m2 and asymmetry of 9.0, which are expected to increase the optical rectenna efficiency by 10,000.
ABSTRACT
We present a comprehensive approach for tailoring the spectral and angular properties of infrared thermal radiation by using a polymer resonator with molecular vibrational modes, consisting of a polymer thin film on a back-reflective substrate. To precisely design the resonator, we derived the infrared dielectric function of a poly(methyl methacrylate) (PMMA) thin film from the measured reflectance spectrum by fitting it with a Gaussian-convoluted Drude-Lorentz model while accounting for the inhomogeneous broadening caused by the disordered structure of polymers. Our experimental and numerical characterization confirms that the polymer resonator exhibits spectral shaping from quasi-broadband to narrowband due to the intrinsic molecular vibrational absorption of the polymer. The frequency-isolated and strong molecular vibrational absorption of the carbonyl stretching mode at 1730 cm-1 enables the narrowband shaping of the PMMA resonator. In addition, we confirm that the angular-shaping characteristics of this polymer resonator can be tuned, from omnidirectional to strongly angular selective, by changing its polymer film thickness. Modal dispersion analysis reveals that the angle-selectivity of the polymer resonator at an angle of incidence of 80° comes from coupling between the molecular vibrational mode and leaky mode. The proposed infrared radiation management strategy based on molecular vibrational modes of polymers is cost-effective, scalable, and works well with terrestrial matter, including organic compounds and gas molecules, showing promise for applications such as optical gas sensing and radiative thermal management.
ABSTRACT
Easy-to-fabricate, high-temperature, thermally-stable radiators are critical elements for developing efficient and sustainable thermophotovoltaic energy conversion devices. In this frame, a trilayer-on-substrate structure is selected. It is composed of a refractory metal -molybdenum - constituting the substrate and an intermediate thin film sandwiched between two hafnia transparent layers. An in-depth analysis shows that two spectrally distinct interference regimes take place in the hafnia layer-molybdenum thin film substructure, and that backward and forward thermally-emitted waves by the thin film are selected in two distinct interferential resonating cavities. The interference regimes within and between these cavities are key to the spectral shaping of thermal emission. The radiative performances of the structures are evaluated by introducing a figure of merit. Using the example of a GaSb cell, it is shown that the structure can be optimized for providing the broadband large emission with a steep cutoff required for mitigating photoconversion losses.
ABSTRACT
Proton transport properties of a partially protonated poly(aspartic acid)/sodium polyaspartate (P-Asp) were investigated. A remarkable enhancement of proton conductivity has been achieved in the thin film. Proton conductivity of 60-nm-thick thin film prepared on MgO(100) substrate was 3.4 × 10(-3) S cm(-1) at 298 K. The electrical conductivity of the oriented thin film was 1 order of magnitude higher than the bulk specimen, and the activation energies for the proton conductivity were 0.34 eV for the oriented thin film and 0.65 eV for the pelletized sample, respectively. This enhancement of the proton transport is attributable to the highly oriented structure on MgO(100) substrate. This result proposes great potential for a new strategy to produce a highly proton-conductive material using the concept of an oriented thin film structure without strong acid groups.
Subject(s)
Peptides/chemistry , Protons , Molecular Structure , Peptides/chemical synthesisABSTRACT
Spectral properties of one-dimensional tungsten gratings with various depths and widths of grooves were investigated by means of finite-difference time-domain simulation with a multi-Lorentz model. Shallow gratings showed a strong absorption peak due to surface plasmon polaritons when the oscillation of the electric field was parallel to the grating vector. On the other hand, deep gratings with wide grooves showed a different absorption attributed to the microcavity effect when the oscillation of the electric field was perpendicular to the grating vector. With narrowed grooves, another absorption with d-dependence occurred, which was probably due to vertically oscillating surface plasmons to the grooves.
