ABSTRACT
Objective @#To verify the feasibility of using a homemade lung phantom for quality control of Cyberknife by comparing the measurement results of the homemade lung phantom and CIRS dynamic phantom in E2E testing of Cyberknife lung tracking. @*Methods @#The patient treatment process was simulated, including CT positioning, plan design, irra- diation implementation, film scanning, and analysis using the homemade phantom and CIRS phantom. The two phantoms were measured five times using MLC under the S7 generation Cyberknife and five times using Iris under the M6 generation Cyberknife. The differences in measurement results between the two phantoms were analyzed using independent sample t-test.@*Results @#For the S7 generation Cyberknife, the statistical analysis of differences between the two phantoms in the detection values on the X-axis, Y-axis, Z-axis, and total deviation showed P values of 0.236, 0.175, 0.289, and 0.668, respect- ively. For the M6 generation Cyberknife, the statistical analysis showed P values of 0.880, 0.891, 0.573, and 0.433, respect- ively. The P values were all > 0.05. Therefore, there were no statistically significant differences in the detection results between the homemade lung phantom and the CIRS phantom under the S7 and M6 generation Cyberknife. The total deviation values were <1.5 mm.@*Conclusion @#The homemade lung phantom and CIRS phantom have consistent measurement results in the E2E testing of Cyberknife lung tracking and meet the requirements of Report of AAPM TG-135 and WS 667- 2019 standard. Therefore, the homemade lung phantom is feasible for clinical quality control of Cyberknife.
ABSTRACT
Objective To explore the feasibility of quartz glass for radiotherapy dosimetry through the experimental study of the thermoluminescence characteristics of synthetic quartz glass. Methods The thermoluminescence glow curves of quartz glass under different annealing conditions were analyzed, the thermoluminescence characteristics of quartz glass were studied, and the measurement parameters were optimized. Using the Co-60 reference radiation field in the National Secondary Standard Dosimetry Laboratory, the quartz glass samples under different annealing conditions were irradiated following the dose levels of radiotherapy, i.e., 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, and 10.0 Gy, respectively. According to the relationship between the absorbed dose of quartz glass and the relative thermoluminescence signal intensity, the linearity and dispersion of the dose response of quartz glass were obtained, and the feasibility of quartz glass for radiotherapy dosimetry was analyzed. Results The linear correlation coefficient of dose response of quartz glass under annealing condition of 430℃ for 10 min was 0.9984, and the dose response dispersion was 0.97% at the absorbed dose of 2 Gy. The linear correlation coefficient of dose response of quartz glass under annealing condition of 600℃ for 1 h was 0.9911, and the dose response dispersion was 1.4% at the absorbed dose of 2 Gy. Conclusion Preliminary results suggest that quartz glass with annealing condition of 430℃ for 10 min has the potential to be used for radiotherapy dosimetry.
ABSTRACT
BACKGROUND: The rapid spread of the coronavirus disease 2019 (COVID-19) pandemic demonstrates the value of regional cooperation in infectious disease prevention and control. We explored the literature on regional infectious disease control bodies, to identify lessons, barriers and enablers to inform operationalisation of a regional infectious disease control body or network in southeast Asia. METHODS: We conducted a scoping review to examine existing literature on regional infectious disease control bodies and networks, and to identify lessons that can be learned that will be useful for operationalisation of a regional infectious disease control body such as the Association of Southeast Asian Nations (ASEAN) Center for Public Health Emergency and Emerging Diseases. RESULTS: Of the 57 articles included, 53 (93%) were in English, with two (3%) in Spanish and one (2%) each in Dutch and French. Most were commentaries or review articles describing programme initiatives. Sixteen (28%) publications focused on organisations in the Asian continent, with 14 (25%) focused on Africa, and 14 (25%) primarily focused on the European region. Key lessons focused on organisational factors, diagnosis and detection, human resources, communication, accreditation, funding, and sustainability. Enablers and constraints were consistent across regions/ organisations. A clear understanding of the regional context, budgets, cultural or language issues, staffing capacity and governmental priorities, is pivotal. An initial workshop inclusive of the various bodies involved in the design, implementation, monitoring or evaluation of programmes is essential. Clear governance structure, with individual responsibilities clear from the beginning, will reduce friction. Secure, long-term funding is also a key aspect of the success of any programme. CONCLUSION: Operationalisation of regional infectious disease bodies and networks is complicated, but with extensive groundwork, and focus on organisational factors, diagnosis and detection, human resources, communication, accreditation, funding, and sustainability, it is achievable. Ways to promote success are to include as many stakeholders as possible from the beginning, to ensure that context-specific factors are considered, and to encourage employees through capacity building and mentoring, to ensure they feel valued and reduce staff turnover.
Subject(s)
COVID-19 , Communicable Diseases , Humans , COVID-19/prevention & control , Public Health , Communicable Disease Control , Pandemics/prevention & controlABSTRACT
Objective@#To discuss the feasibility of applying home-made auto quality assurance (AQA) phantom in Cyberknife AQA test.@*Methods@#The same treatment plan for AQA test was designed in the Cyberknife treatment planning system. The AQA tests were performed under the same conditions using the home-made AQA phantom and the AQA phantom in the fourth-generation (G4) Cyberknife mode and the fifth-generation (VSI) Cyberknife mode, respectively, and each measurement was repeated five times to analyze and compare the differences in test results between the two phantoms.@*Results@#The total deviations of the home-made AQA phantom and the AQA phantom in the AQA test under the G4 Cy- berknife mode were (0.28 ± 0.12) mm and (0.28 ± 0.15) mm, respectively (P > 0.05); the test results under the VSI Cy- berknife mode were (0.46 ± 0.19) mm and (0.50 ± 0.07) mm, respectively (P > 0.05); the total deviations of all test results were smaller than 1.0 mm, which met the requirements of WS 667—2019 Specification for Testing of Quality Control in Ro- botic Arm Radiotherapy Device.@*Conclusion@#The test results of the home-made AQA phantom and the AQA phantom are consistent in the AQA test, and the home-made AQA phantom can be used for Cyberknife quality control.
