Osteosynthesis-associated infection in maxillofacial surgery by bacterial biofilms: a retrospective cohort study of 11 years.

OBJECTIVES: The aim of this retrospective cohort study was to determine risk factors for osteosynthesis-associated infections (OAI) with subsequent necessity of implant removal in oral and maxillofacial surgery. MATERIALS AND METHODS: A total of 3937 records of patients who received either orthognathic, trauma, or reconstructive jaw surgery from 2009 to 2021 were screened for osteosynthetic material removal due to infection. Treatment-intervals, volume of applied osteosynthetic material, and respective surgical procedures were also assessed. Moreover, intraoperatively harvested microbial flora was cultured and subsequently identified by MALDI TOF. Bacteria were then screened for antibiotic resistance via VITEK system or, if necessary, via agar diffusion or epsilometer test. Data was analyzed utilizing SPSS statistical software. For statistical analysis of categorical variables, chi-square tests or Fisher exact tests were used. Continuous variables were compared via non-parametric tests. The level of significance for p-values was set at < 0.05. Descriptive analysis was also performed. RESULTS: The lower jaw was more prone to OAI than the mid face region. Larger volumes of osteosynthetic material led to significantly more OAI, resulting in reconstruction plates bearing the highest risk for OAI especially when compared to small-volume mini-plates frequently applied in trauma surgery. Among OAI associated with implant volumes smaller than 1500 mm3, the detection of Streptococcus spp., Prevotella spp., Staphylococcus spp., and Veillonella spp. was significantly elevated, whereas implant volumes larger than 1500 mm3 showed a significant increase of Enterococcus faecalis, Proteus mirabilis and Pseudomonas aeruginosa. High susceptibility rates (87.7-95.7%) were documented for 2nd- and 3rd-generation cephalosporines and piperacillin/tazobactam. CONCLUSION: High material load and lower jaw reconstruction bear the greatest risks for OAI. When working with large volume osteosynthetic implants, gram-negative pathogens must be considered when choosing an appropriate antibiotic regime. Suitable antibiotics include, e.g., piperacillin/tazobactam and 3rd-generation cephalosporines. CLINICAL RELEVANCE: Osteosynthetic material utilized in reconstructive procedures of the lower jaw may be colonized with drug-resistant biofilms.

Long-Term Results After Head Orthosis Therapy for Early Childhood Position-Related Cranial Deformities: Stability of Treatment Outcome and Parental Satisfaction.

ABSTRACT: The purpose of this study was to determine whether different types of position-related cranial deformities show changes after completion of head orthosis therapy. We investigated how children's age at the begin of molding helmet therapy affects the duration and long-term stability of treatment. In addition, parental satisfaction with helmet therapy has been investigated.Between 2012 and 2019, 47 patients have been analyzed after undergoing helmet therapy. At the beginning of treatment different disease pattern were classified. Posterior deformational Plagiocephalus defined by a cranial vault index (CVA) > 1 cm and a cranial index (CI) ≤ 90%. Posterior deformational Brachycephalus defined by CVA ≤ 1 cm and CI > 90%. Posterior deformational combined Plagio- and Brachycephalus defined by CVA > 1 cm and CI > 90%. At the beginning of therapy, the end of therapy and within 5-year-follow-up CI and CVA was measured by three-dimensional photogrammetry for 2 age groups (4-6 and 7-12 months). Additionally, parents completed a standardized questionnaire to evaluate the personal assessment of treatment outcome.During treatment CI and CVA of all children decreased significantly (P < 0.001). Furthermore, CI significantly decreased after ending helmet therapy (P < 0.001). Cranial vault index decreased not significantly in the same period (P = 0.361). For the 4 to 6 months old group treatment time was significantly shorter than for the older group. Before starting helmet therapy nearly half of the parents graded the scull as moderate and one-third as severe deformed. After ending treatment, the majority of parents report satisfaction and compliance. However, one-third of parents noted a slight scull deformation and personal load during therapy.After completion of therapy an improvement of head shape can be expected for the majority of children. This is particularly evident for improvement of the CI and a shorter treatment time until the age of 6 months at the beginning of therapy. Parents reported satisfaction and child compliance. Almost all parents were convinced that treatment was useful and would repeat it again.

A volumetric study of mandibular condyles in orthognathic patients by semiautomatic segmentation.

PURPOSE: This study was conducted to elucidate volumetric data of mandibular condyles of orthognathic patients by analyzing cone beam computed tomography images based upon semiautomatic segmentation. METHODS: Cone beam computed tomography images of 87 patients with malocclusions were analyzed in this retrospective study. Patients were between 17 and 53 years old and diagnosed with Angle class I, II, or III malocclusion. By using the validated open-source software "ITK-SNAP," the volumetric measurements of 174 mandibular condyles were performed. Volumetric analysis was performed according to intra-subject side differences by paired Student t test. In accordance to inter-subject side, gender, age and type of malocclusion differences bivariate analysis and ANOVA were applied. RESULTS: The mean volume for the right condyle was 1.378 ± 0.447 cm3, with a maximum of 2.379 cm3 and a minimum of 0.121 cm3. The mean volume for the left side was 1.435 ± 0.474 cm3, with a maximum of 3.264 cm3 and a minimum of 0.109 cm3. Bivariate analysis indicated a highly significant inter-subject difference between the volume of the left and right mandibular condyles (p < 0.01). Females had a significantly smaller condyle volume than males (p < 0.05 left condyle; p < 0.01 right condyle). CONCLUSION: The fact that shape and volume of mandibular condyles show a high susceptibility to pathological alterations and particularly malocclusions makes a precise knowledge about volumetric changes indispensable. Our results show that significant inter-subject differences in condyle volume could be found with respect to the side and gender. Larger volumes could be assessed for the left condyle and for male patients.

A retrospective analysis of social media posts pertaining to COVID-19 vaccination side effects.

OBJECTIVES: With an uprising influence of social media platforms like Twitter and Instagram a multitude of worldwide accessible information is available. Since the beginning of COVID-19 pandemic the exchange of medical information about several topics related to this infectious disease and its vaccination has increased rapidly. The purpose of this investigation was to assess the content associated with COVID-19 vaccination and its side effects and evaluate its educational quality. METHODS: We conducted this retrospective study to investigate 600 Twitter and Instagram posts by #covidvaccinesideeffects due to number of 'likes', comments, type of post, language, its purpose and source. In addition, posts were evaluated due to educational quality by three examiners of different educational levels. RESULTS: The majority of posts showed 0 to 50 "likes" and 0 to 5 comments in English language. A comparison between Twitter and Instagram by the influence of application showed significant differences in number of posts and "likes" or comments (p < 0.05). The major post type were texts for Twitter (251; 83.7%) and videos for Instagram (104; 34.7%). While a majority of posts by #covidvaccinesideeffects report about the occurrence of side effects, the majority of them were mild and general COVID-19 vaccination feedback during the first 4 months was positive. But, only 3 to 7% were rated by "excellent" educational and validatable content. Interrater reliability between all three examiners presented a high concordance with 89% (p = 0.001). CONCLUSIONS: This study presents an analysis of quantity and quality of social media content according to COVID-19 vaccinations and its side effects. It supports the deduction that most of the content on Twitter and Instagram is shared by patients and unclear sources and thus is limited informative. Nevertheless, influence of social media on medical information especially during COVID-19 pandemic is increasing and practitioners have to face its effect on their patients.

#facialtraumasurgery: Educational Content of Instagram as a Social Media Source for Facial Trauma Surgery.

ABSTRACT: With an uprising influence of social media platforms like Instagram during the last decade, medical and healthcare related posts have accumulated majorly. In particular the head and face characterizes and signifies each individual's human character, which may be the reason why numerous posts are shared on social media platforms. The purpose of this investigation was to assess the content associated with facial trauma surgery and evaluate its educational quality.The authors performed a retrospective investigation on 550 Instagram posts by #facialtraumasurgery due to number of "likes," comments, type of post, language, its purpose, and source. Furthermore, posts were evaluated due to their educational quality by 3 examiners of different educational levels.The majority of posts showed 0 to 50 "likes" and 0 to 5 comments in English language. The major post type were single photographs (289; 52.5%), multiple photographs (188; 34.2%), videos (73; 13.3%) and predominantly case reports (233; 42.4%). The source was 322 (58.5%) posts by surgeons, followed by 185 (33.6%) clinic posts. Only 10% to 18% of the posts were rated "excellent." Interrater reliability between all 3 examiners presented a high concordance with 89% (P = 0.000).Our study presents an analysis of quantity and quality of social media content according to facial trauma surgery. It supports the deduction that most of the content on Instagram is shared by patients and unclear sources and thus is limited informative. Nevertheless, influence of social media on medical information is increasing and practitioners have to face its effect on their patients.

Comparison of two established 2D staging techniques to their appliance in 3D cone beam computer-tomography for dental age estimation.

For medicolegal purposes, orthodontic or orthognathic treatment various stomatological staging technique for age estimation with appliance of conventional radiographic images have been published. It remains uninvestigated if cone beam computer-tomography delivers comparable staging results to the conventional radiographic stages of third molar analysis. We conducted a retrospective cross-sectional study of 312 patients aged 13-21 years. Dental age estimation staging technique, introduced by Nolla and Demirjian, were applied on the left lower third molar imaged by conventional panoramic radiographs and cone beam computer-tomography. It was investigated if 2D and 3D imaging presented different staging results for dental age estimation. In 21% the Demirjian's staging differed by a single stage between 2 and 3D images. The greatest congruence (87%) between 2 and 3D images was revealed for stage 7 (G). In contrary, stage 5 (E) presented the lowest level of congruence with 47.4%. The categorization of Nolla revealed divergences in staging for than two categorical variables in Nolla's stages 3, 4, 5 and 6. In general, the analysis of the data displayed the divergence for Nolla's stages 4-8. The staging results for 2D and 3D imaging in accordance to the rules of Nolla and Demirjian showed significant differences. Individuals of 18 years may present immature third molars, thus merely an immature third molar cannot reject legal majority. Nolla's and Demirjian's 2D and 3D imaging present significantly different staging results.

Cefazolin versus ampicillin/sulbactam as an empiric antibiosis in severe odontogenic neck infection descending from the lower jaw-retrospective analysis of 350 cases.

OBJECTIVES: Odontogenic infections descending from the lower jaw may lead to severe health conditions. Commonly, a biphasic treatment of surgical drainage and antibiotic therapy is conducted. The choice of the administered empiric antibiotic agent remains debatable. MATERIAL AND METHODS: Retrospectively, we analyzed 350 medical records of patients who were consecutively treated with odontogenic infections descending from the lower jaw. All patients received surgical drainage and either cefazolin or ampicillin/sulbactam as empiric antibiosis. In particular, the number of secondary operations, infectious parameters, and length of in-hospital stay were investigated. RESULTS: The most frequently infected space was the perimandibular/buccal space for both groups followed by the submandibular space. Number of revision procedures, early recurrence, and length of stay presented no significant difference between both groups (p > 0.05). Inflammatory parameters (c-reactive protein, leukocytes) similarly decreased in both groups. CONCLUSION: Cefazolin targets the majority of the pathogens detected in severe odontogenic neck infections descending from the lower jaw and reveals comparable results to AMP/S in regard to the inflammatory parameters and in-hospital stay. CLINICAL RELEVANCE: Cefazolin is a feasible empiric antibiosis for odontogenic neck infections descending from the lower jaw if surgical drainage is performed.

Systematic three-dimensional analysis of wafer-based maxillary repositioning procedures in orthognathic surgery.

PURPOSE: Little is known about the three-dimensional (3D) transfer accuracy in maxillary repositioning procedures based on conventionally manufactured dental-mounted wafers. The purpose of the present study was a systematic 3D analysis for wafer-based maxillary positioning in orthognathic surgery. MATERIALS AND METHODS: A total of 92 patients underwent Le Fort I in addition to mandibular bilateral sagittal split osteotomies (BSSO). Alignment of the pre- and postsurgical CBCT data sets allowed measuring maxillary position changes in axial, sagittal and transversal directions. RESULTS: The highest achieved absolute transfer inaccuracies were 1.37 mm, ±0.84 in the sagittal direction, followed by 1.15 mm, ±0.69 in the axial, as well as 1.05 mm, ±0.79 in the transversal direction. The largest relative deviations could be found for repositions in the transversal plane (109.4%, ±4.5), followed by the axial (66.2%, ±51.5) and sagittal plane (49.3%, ±2.2). Significant transfer accuracy differences of repositioning procedures in the sagittal direction, mainly advancement procedures, could be detected if performed with (1.75 mm, ±0.90) or without (1.18 mm, ±0.78) additional rotational correction component. No significant differences were found between unidirectional and multidirectional maxillary correction procedures. CONCLUSION: The present study for the first time delivers systematic 3D accuracy data of wafer-based maxillary positioning procedures, attesting to its feasibility but also further encouraging the search for improvement strategies.

Autofluorescence imaging in recurrent oral squamous cell carcinoma.

The survival of patients with oral cancer is decreased by locoregional recurrence after an initial multimodal treatment. In order to identify lesions in the oral cavity for a possible recurrence, clinical evaluation as well as MRI or CT scanning is advised. The evaluation of mucosa lesions is hampered by changes related to radio- and chemotherapy as well as reconstruction with tissue flaps. Several techniques for easier identification of tissue abnormalities in the oral cavity have been advocated as adjuncts in order to facilitate identification. Especially methods using altered tissue fluorescence have gained much interest during the last decade. The aim of our prospective study was to evaluate fluorescence properties of undiagnosed mucosa lesions with the VELscope device in patients with multimodal treated oral cancer prior to histological confirmation. In total, 41 patients with a history of oral squamous cell carcinomas (OSCC) (19 females and 22 males) with undiagnosed mucosa lesions where included in the study. After clinical evaluation, examination and documentation using the VELscope® device were performed. Then, an incisional biopsy was performed. An autofluorescence loss indicating a malignant or dysplastic mucosa condition could be detected in six patients (14.6 %); however, only one OSCC and one SIN revealed a complete autofluorescence loss. In four patients, OSCC was present in lesions with retained autofluorescence. Sensitivity and specificity for the VELscope® examination to identify malignant oral lesions by autofluorescence were 33.3 and 88.6 %, respectively. The positive and negative predictive values were 33.3 and 88.6 %, respectively. No statistical correlation between gender and lesion appearance versus autofluorescence loss could be detected. In contrast to mucosa lesions in patients with no prior treatment, the autofluorescence evaluation with the VELscope reveals no additional information in our analysis. Accordingly, invasive biopsies as gold standard are still needed to get sufficient evidence regarding potential malignancy in patients after multimodal treatment for oral cancer.

Comparison of design and torque measurements of various manual wrenches.

PURPOSE: Accurate torque application and determination of the applied torque during surgical and prosthetic treatment is important to reduce complications. A study was performed to determine and compare the accuracy of manual wrenches, which are available in different designs with a large range of preset torques. MATERIALS AND METHODS: Thirteen different wrench systems with a variety of preset torques ranging from 10 to 75 Ncm were evaluated. Three different designs were available, with a spring-in-coil or toggle design as an active mechanism or a beam as a passive mechanism, to select the preset torque. To provide a clinically relevant analysis, a total of 1,170 torque measurements in the range of 10 to 45 Ncm were made in vitro using an electronic torque measurement device. RESULTS: The absolute deviations in Ncm and percent deviations across all wrenches were small, with a mean of -0.24 ± 2.15 Ncm and -0.84% ± 11.72% as a shortfall relative to the preset value. The greatest overage was 8.2 Ncm (82.5%), and the greatest shortfall was 8.47 Ncm (46%). However, extreme values were rare, with 95th-percentile values of -1.5% (lower value) and -0.16% (upper value). A comparison with respect to wrench design revealed significantly higher deviations for coil and toggle-style wrenches than for beam wrenches. CONCLUSION: Beam wrenches were associated with a lower risk of rare extreme values thanks to their passive mechanism of achieving the selected preset torque, which minimizes the risk of harming screw connections.

Autofluorescence imaging of potentially malignant mucosa lesions.

OBJECTIVE AND STUDY DESIGN: Several noninvasive adjunctive methods have been proposed for identification of potentially malignant mucosa lesions. The VELscope is an optical device for detecting spatial changes in mucosa autofluorescence caused by premalignant lesions in conjunction with an intraoral exam. The aim of our prospective study was to correlate loss of autofluorescence from undiagnosed mucosa lesions with histology. RESULTS: In total 64 patients considered at risk for squamous cell carcinoma (20 had previous OSCC) were included in the study. Regions with fluorescence visualization loss were considered as malignant or dysplastic. All patients underwent biopsy after VELscope examination. In 22 patients (34.4%) a loss of autofluorescence indicating a squamous intraepithelial neoplasia (SIN) or malignant mucosal lesion was detected. The sensitivity of identification of malignant and dysplastic areas with the VELscope was 100% and the specificity was 80.8%, respectively, compared with histology as gold standard. The positive predictive value was 54.5% and the negative predictive value was 100% respectively. CONCLUSION: Evaluation of autofluorescence imaging with VELscope can assist in the identification of malignant and potentially malignant oral lesions from normal mucosa in high-risk patients but does not help discriminating benign lesions from malignant or premalignant mucosal conditions.

Comparison of torque measurements and clinical handling of various surgical motors.

PURPOSE: Modern implant dentistry requires the application of torque during various treatment steps. This study investigated seven different surgical motors for the accuracy of the applied torque and their reliability. MATERIALS AND METHODS: The following surgical motors were evaluated: Chiropro 980 (Bienair), INTRAsurg 300 and INTRAsurg 500 (KaVo), Osseocare (Nobel Biocare), Surgic XT (NSK), Elcomed SA-200 C (W and H), and Osseo System (XO Dentalcare). The torque was measured during typical surgical and prosthetic procedures using a special load transfer mechanism for a torque gauge. For each setting, 30 measurements were made and means were calculated. RESULTS: The highest percentage shortfall was 20.5% at a set torque of 11.4 Ncm (absolute deviation of -2.4 Ncm). The highest percentage by which a torque was exceeded was 54.6% (absolute deviation of 5.5 Ncm). The lowest value for absolute shortfall was found to be -5.6 Ncm at a set torque of 45 Ncm. The highest absolute exceeded was 15 Ncm at a set torque of 40 Ncm. Potentially problematic torque values were identified in the low-torque-value setting, as the implant position may be changed if a machine driver applies excessive torque to the first-stage healing screw. In addition, in the indication of immediate loading in the high-set-torque group, torque values above the critical value of 50 Ncm may be unwittingly applied while working with a set torque of 40 Ncm. CONCLUSION: For most of the clinically relevant torque settings, precise values were measured, although a few devices delivered potentially problematic torque values for some of the indications.

Experimental immediate loading of dental implants in conjunction with grafting procedures.

The aim of this study was to evaluate immediate loading (IL) of dental implants in conjunction with grafting procedures. A total of 107 IL implants were inserted in six mini pigs. Before implant placement, crestal or apical defects were created, which were treated with bone chips, phycogene hydroxyapatite (HA), bovine HA, or bovine HA enhanced with a synthetic peptide. Crestal grafts were stabilized with titanium membranes. All bridges were in function and showed signs of chewing wear after 4-month loading. Three out of 107 implants showed no osseointegration (2.7%). Most of the crestal defects showed incomplete regeneration, due to an infection of the membranes (74.3%) The difference in height between surgical and remaining defect was calculated as defect development, which was 2.3 +/- 2.08 mm for bone chips with an area of regenerated bone of 22.8 +/- 3.34% and 0.7 +/- 2.22 mm for phycogene HA with 11.3 +/- 4.36% regenerated bone. Bovine HA showed an increase of defects 1.3 +/- 2.47 mm with only 7.9 +/- 1.7% bone regeneration. Bovine HA enhanced with a peptide showed a defect development of 1.1 +/- 1.42 mm with an area of regenerated bone of 18.2 +/- 2.38%. In conclusion, local grafting procedures did not disturb the course of osseointegration for immediate loaded implants if primary stability was reached. The regeneration of apical defects was uneventful even with immediate loading. Crestal defects required membrane fixation with a careful flap elevation to avoid membrane exposure and loss of the graft.

Mechanical stability of immediately loaded implants with various surfaces and designs: a pilot study in dogs.

PURPOSE: Immediate loading is among the most innovative techniques in implant therapy today. This pilot study investigates the biomechanical outcome of various designs and surfaces that claim to shorten implant treatment. MATERIALS AND METHODS: In each quadrant of two mongrel dogs, four different implants were used for immediate loading. The following implants were placed 3 months after tooth extraction: screw with low thread profile and anodic oxidized surface (LPAOS), solid screw with wide thread profile and titanium plasma spray coating (WPTPS), screw with low profile and hybrid design of double-etched and machined surface (LPHES), and screw with two thread profiles and a sandblasted and acid-etched surface (DTSAE). The insertion torque of each implant was above 35 Ncm. Resonance frequency analysis was performed after implant placement and again after sacrifice. Additionally, the removal torque and the amount of embedded titanium particles in the peri-implant bone were measured. RESULTS: All 16 prostheses were functional after a 5-month loading period. The highest mean removal torque values were recorded with WPTPS implants (24.4 Ncm/mm), followed by DTSAE implants (22.3 Ncm/mm) and LPAOS implants (18.7 Ncm/mm); the lowest score was obtained by LPHES (12.0 Ncm/mm). The ISQ values increased between the time of surgery and recall for all systems on average, but a significant positive correlation was found for DTSAE only. Significantly higher amounts of titanium were found in the surrounding bone with WPTPS (0.76%) and LPAOS (0.41%) in comparison with DTSAE (0.10%) and LPHES (0.03%). CONCLUSION: Immediate loading is possible with various designs and surfaces if high primary stability can be achieved during implant placement.