Bacterial reservoir in deeper skin is a potential source for surgical site and biomaterial-associated infections.

BACKGROUND: The origin of surgical site and biomaterial-associated infection is still elusive. Micro-organisms contaminating the wound may come from the air in the operating theatre, the surgical team or the skin of the patient. The skin of patients is disinfected prior to surgery, but bacteria deeper in the skin (e.g. in sweat glands or sebaceous glands) may not be reached. METHODS: A preliminary cohort study was performed to study the origin of surgical site and biomaterial-associated infection between May 2020 and February 2021. In order to investigate whether cutaneous microbiota colonize the wound when released from the skin upon cutting, aerobic and anaerobic bacteria were isolated, quantified and identified from the skin of 99 patients undergoing trauma surgery, before and after skin disinfection, from knife blades and from the wound directly after the first cut. RESULTS: Ninety-nine percent of the patients were culture-positive before disinfection with chlorhexidine. Of these, 40% were still culture-positive after disinfection. Of these, 54% had a positive culture of the wound after cutting the skin. Twenty percent of the patients with a negative culture after disinfection had a positive wound culture after cutting the skin. Staphylococcus epidermidis and Cutibacterium acnes were the most commonly cultured bacterial species. In 9% of cases, more than 100 bacterial colonies were cultured from the wound; this may cause biomaterial-associated infection. CONCLUSION: Bacteria residing in the skin and not eradicated by disinfection may enter the surgical wound upon cutting, resulting in contamination which may cause biomaterial-associated infection.

Effects of sterilization on the mechanical properties of poly(methyl methacrylate) based personalized medical devices.

BACKGROUND: Nowadays, personalized medical devices are frequently used for patients. Due to the manufacturing procedure sterilization is required. How different sterilization methods affect the mechanical behavior of these devices is largely unknown. MATERIALS AND METHODS: Three poly(methyl methacrylate) (PMMA) based materials (Vertex Self-Curing, Palacos R+G, and NextDent C&B MFH) were sterilized with different sterilization methods: ethylene oxide, hydrogen peroxide gas plasma, autoclavation, and γ-irradiation. Mechanical properties were determined by testing the flexural strength, flexural modulus, fracture toughness, and impact strength. RESULTS: The flexural strength of all materials was significantly higher after γ-irradiation compared to the control and other sterilization methods, as tested in a wet environment. NextDent C&B MFH showed the highest flexural and impact strength, Palacos R+G showed the highest maximum stress intensity factor and total fracture work. CONCLUSION: Autoclave sterilization is not suitable for the sterilization of PMMA-based materials. Ethylene oxide, hydrogen peroxide gas plasma, and γ-irradiation appear to be suitable techniques to sterilize PMMA-based personalized medical devices.

Fabrication of oxide layer on zirconium by micro-arc oxidation: Structural and antimicrobial characteristics.

The aim of this study was to cover the surfaces of zirconium (Zr) with an antimicrobial layer for biomedical applications. For this purpose, the micro-arc oxidation (MAO) process was employed in a sodium silicate and sodium hydroxide containing base electrolyte with and without addition of silver acetate (AgC2H3O2). In general, synthesized MAO layers were composed of zirconium oxide (ZrO2) and zircon (ZrSiO4). Addition of AgC2H3O2 into the base electrolyte caused homogenous precipitation of silver-containing particles in the MAO layer, which exhibited excellent antibacterial efficiency against methicillin-resistant Staphylococcus aureus (MRSA) as compared to the untreated and MAO-treated Zr.

Prevention of Staphylococcus aureus biomaterial-associated infections using a polymer-lipid coating containing the antimicrobial peptide OP-145.

The scarcity of current antibiotic-based strategies to prevent biomaterial-associated infections (BAI) and their risk of resistance development prompted us to develop a novel antimicrobial implant-coating to prevent Staphylococcus aureus-induced BAI. We incorporated the antimicrobial peptide OP-145 into a Polymer-Lipid Encapsulation MatriX (PLEX)-coating to obtain high peptide levels for prolonged periods at the implant-tissue interphase. We first confirmed that OP-145 was highly effective in killing S. aureus and inhibiting biofilm formation in vitro. OP-145 injected along S. aureus-inoculated implants in mice significantly reduced the number of culture-positive implants. OP-145 was released from the PLEX coating in a controlled zero-order kinetic rate after an initial 55%-burst release and displayed bactericidal activity in vitro. In a rabbit intramedullary nail-related infection model, 67% of rabbits with PLEX-OP-145-coated nails had culture-negative nails after 28days compared to 29% of rabbits with uncoated nails. In rabbits with PLEX-OP-145-coated nails, bone and soft tissue samples were culture-negative in 67% and 80%, respectively, whereas all bone samples and 71% of the soft tissue samples of rabbits with uncoated nails were infected. Together, PLEX-OP-145 coatings, of which both compounds have already been found safe in man, can prevent implant colonization and S. aureus-induced BAIs.

Real-time quantification of matrix metalloproteinase and integrin αvß3 expression during biomaterial-associated infection in a murine model.

Biomaterial implants and devices increase the risk of microbial infections due to the biofilm mode of growth of infecting bacteria on implant materials, in which bacteria are protected against antibiotic treatment and the local immune system. Matrix-metalloproteinases (MMPs) and cell surface integrin receptors facilitate transmigration of inflammatory cells toward infected or inflamed tissue. This study investigates the relationship between MMP- and integrin-expression and the clearance of infecting Staphylococcus aureus around implanted biomaterials in a murine model.MMP- and integrin αvß3-expression were monitored in mice, with and without subcutaneously implanted biomaterial samples, in the absence and presence of bioluminescent S. aureus Xen36. Staphylococcal persistence was imaged longitudinally over time using bioluminescence imaging. The activatable MMPSense®680 and integrin-targeted IntegriSense®750 probes were injected on different days after implantation and their signal intensity and localisation monitored using fluorescence imaging. After sacrifice 7 or 16 days post-implantation, staphylococci from biomaterial samples and surrounding tissues were cultured on agar-plates and presence of host inflammatory cells was histologically evaluated.MMP- and integrin-expression were equally enhanced in presence of staphylococci or biomaterials up to 7 days post-implantation, but their localisation along the biomaterial samples differed. Bacterial clearance from tissue was higher in the absence of biomaterials. It is of clinical relevance that MMP- and integrin-expression were enhanced in presence of both staphylococci and biomaterials, although the immune system in the presence of biomaterials remained hampered in eradicating bacteria during the first 7 days post-implantation.

In vitro cytotoxicity evaluation of porous TiO2-Ag antibacterial coatings for human fetal osteoblasts.

Implant-associated infections (IAIs) may be prevented by providing antibacterial properties to the implant surface prior to implantation. Using a plasma electrolytic oxidation (PEO) technique, we produced porous TiO2 coatings bearing various concentrations of Ag nanoparticles (Ag NPs) (designated as 0 Ag, 0.3 Ag and 3.0 Ag) on a Ti-6Al-7Nb biomedical alloy. This study investigates the cytotoxicity of these coatings using a human osteoblastic cell line (SV-HFO) and evaluates their bactericidal activity against methicillin-resistant Staphylococcus aureus (MRSA). The release of Ag and the total amount of Ag in the coatings were determined using a graphite furnace atomic absorption spectrometry technique (GF-AAS) and flame-AAS, respectively. Cytotoxicity was evaluated using the AlamarBlue assay coupled with the scanning electron microscopy (SEM) observation of seeded cells and by fluorescence microscopy examination of the actin cytoskeleton and nuclei after 48 h of incubation. Antibacterial activity was assessed quantitatively using a direct contact assay. AlamarBlue viability assay, SEM and fluorescence microscopy observation of the SV-HFO cells showed no toxicity for 0 Ag and 0.3 Ag specimens, after 2, 5 and 7 days of culture, while 3.0 Ag surfaces appeared to be extremely cytotoxic. All Ag-bearing surfaces had good antibacterial activity, whereas Ag-free coatings showed an increase in bacterial numbers. Our results show that the 0.3 Ag coatings offer conditions for optimum cell growth next to antibacterial properties, which makes them extremely useful for the development of new antibacterial dental and orthopedic implants.

Accumulation of human EGF in nectar of transformed plants of Nicotiana langsdorffii x N. sanderae and transfer to honey by bees.

Honey has been used successfully in wound healing for thousands of years. The peptide hormone human epidermal growth factor (hEGF) is also known to have a beneficial effect in various wound healing processes via mechanisms that differ from those for honey. In this study, we show that hEGF can be incorporated into honey via nectar. Plants of Nicotiana langsdorffii x N. sanderae were transformed with the gene for hEGF, equipped with a nectary-targeted promoter and a signal sequence for secretion to nectar. These plants accumulated hEGF in the nectar. The maximum hEGF concentration recorded with ELISA in these plants is 2.5 ng·ml⁻¹. There is a significant linear relationship (P<0.001) between hEGF concentration and induction of hEGF-receptor phosphorylation. Since the flower morphology of these plants did not allow production of honey from their nectar, we used feeding solutions, spiked with synthetic hEGF, to study transfer of this peptide into honey through bee activity. Transfer of hEGF from a feeding solution to honey by bees occurred with retention of the hEGF concentration and the capacity to induce hEGF-receptor phosphorylation. These observations indicate that plants can function as a production platform for honey containing biologically active peptides, which may enhance wound healing and other biological processes.

Medical-grade honey enriched with antimicrobial peptides has enhanced activity against antibiotic-resistant pathogens.

Honey has potent activity against both antibiotic-sensitive and -resistant bacteria, and is an interesting agent for topical antimicrobial application to wounds. As honey is diluted by wound exudate, rapid bactericidal activity up to high dilution is a prerequisite for its successful application. We investigated the kinetics of the killing of antibiotic-resistant bacteria by RS honey, the source for the production of Revamil® medical-grade honey, and we aimed to enhance the rapid bactericidal activity of RS honey by enrichment with its endogenous compounds or the addition of antimicrobial peptides (AMPs). RS honey killed antibiotic-resistant isolates of Pseudomonas aeruginosa, Staphylococcus epidermidis, Enterococcus faecium, and Burkholderia cepacia within 2 h, but lacked such rapid activity against methicillin-resistant S. aureus (MRSA) and extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli. It was not feasible to enhance the rapid activity of RS honey by enrichment with endogenous compounds, but RS honey enriched with 75 µM of the synthetic peptide Bactericidal Peptide 2 (BP2) showed rapid bactericidal activity against all species tested, including MRSA and ESBL E. coli, at up to 10-20-fold dilution. RS honey enriched with BP2 rapidly killed all bacteria tested and had a broader spectrum of bactericidal activity than either BP2 or honey alone.

Microscopic detection of viable Staphylococcus epidermidis in peri-implant tissue in experimental biomaterial-associated infection, identified by bromodeoxyuridine incorporation.

Infection of biomedical devices is characterized by biofilm formation and colonization of surrounding tissue by the causative pathogens. To investigate whether bacteria detected microscopically in tissue surrounding infected devices were viable, we used bromodeoxyuridine (BrdU), a nucleotide analogue that is incorporated into bacterial DNA and can be detected with antibodies. Infected human tissue was obtained postmortem from patients with intravascular devices, and mouse biopsy specimens were obtained from mice with experimental biomaterial infection. In vitro experiments showed that Staphylococcus epidermidis incorporated BrdU, as judged from staining of the bacteria with anti-BrdU antibodies. After incubation of bacteria with BrdU and subsequent staining of microscopic sections with anti-BrdU antibodies, bacteria could be clearly visualized in the tissue surrounding intravascular devices of deceased patients. With this staining technique, relapse of infection could be visualized in mice challenged with a low dose of S. epidermidis and treated with dexamethasone between 14 and 21 days after challenge to suppress immunity. This confirms and extends our previous findings that pericatheter tissue is a reservoir for bacteria in biomaterial-associated infection. The pathogenesis of the infection and temporo-spatial distribution of viable, dividing bacteria can now be studied at the microscopic level by immunolabeling with BrdU and BrdU antibodies.