Properties and Possibilities of Using Biochar Composites Made on the Basis of Biomass and Waste Residues Ferryferrohydrosol Sorbent.

Biochar enriched with metals has an increased potential for sorption of organic and inorganic pollutants. The aim of the research was to identify the possibility of using biochar composites produced on the basis of waste plant biomass and waste FFH (ferryferrohydrosol) containing iron atoms, after CO2 capture. The composites were produced in a one-stage or two-stage pyrolysis process. Their selected properties were determined as follows: pH, ash content, C, H, N, O, specific surface area, microstructure and the presence of surface functional groups. The produced biochar and composites had different properties resulting from the production method and the additive used. The results of experiments on the removal of methylene blue (MB) from solutions allowed us to rank the adsorbents used according to the maximum dye removal value achieved as follows: BC1 (94.99%), B (84.61%), BC2 (84.09%), BC3 (83.23%) and BC4 (83.23%). In terms of maximum amoxicillin removal efficiency, the ranking is as follows: BC1 (55.49%), BC3 (23.51%), BC2 (18.13%), B (13.50%) and BC4 (5.98%). The maximum efficiency of diclofenac removal was demonstrated by adsorbents BC1 (98.71), BC3 (87.08%), BC4 (74.20%), B (36.70%) and BC2 (30.40%). The most effective removal of metals Zn, Pb and Cd from the solution was demonstrated by BC1 and BC3 composites. The final concentration of the tested metals after sorption using these composites was less than 1% of the initial concentration. The highest increase in biomass on prepared substrates was recorded for the BC5 composite. It was higher by 90% and 54% (for doses of 30 g and 15 g, respectively) in relation to the biomass growth in the soil without additives. The BC1 composite can be used in pollutant sorption processes. However, BC5 has great potential as a soil additive in crop yield and plant growth.

Possibilities of Managing Waste Iron Sorbent FFH after CO2 Capture as an Element of a Circular Economy.

With a growing need to reduce greenhouse gas emissions, innovative carbon dioxide sorbents are being sought. One of the sorbents being tested is nanoparticle ferric hydrosol (FFH). In parallel with sorbent testing, it is also necessary to test the used sorbent after carbon dioxide capture (FFHCO2) and to develop an optimal method for its processing and management. The research described in this article evaluated the potential use of FFHCO2 in dewatering, coagulation and bioleaching processes. The research results indicate that the basic strategy for dealing with waste FFHCO2 sorbent should be to minimize the amount of waste by volume reduction-dewatering. Recycling of FFHCO2 as an iron waste coagulant or its processing products by bioleaching had no technological justification. It is only proposed to recover the material-iron compounds-if it is environmentally and economically justified.

Algal Biomass Utilization toward Circular Economy.

A review of the potential areas of algal biomass utilization has already been conducted. In addition to lowering the greenhouse effect and contributing to the decrease in the amounts of harmful substances in the air and water, attention has been paid to the possibility of utilizing algal biomass as a feedstock for the production of environmentally friendly products. The circular economy addresses the benefits to the environment, economy and society. The utilization of algal biomass benefits the environment by reducing greenhouse gases emissions as well as water and wastewater treatment, benefits the economy by producing biofuels, and benefits society by producing food, cosmetics, pharmaceuticals, fertilizers and feed for animals.