Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 12 de 12
Filter
Add more filters










Publication year range
1.
Heliyon ; 9(10): e20136, 2023 Oct.
Article in English | MEDLINE | ID: mdl-37780762

ABSTRACT

In this work, we report the experimental study of a Q-switched optical fiber laser based on graphene oxide quantum dots (GOQDs) as saturable absorber (SA). GOQDs are fabricated by carbonization and exfoliation electrospun polyacrylonitrile (PAN) fibers. The results of Fourier Transform Infrared Spectroscopy (FTIR) showed bands caused by the CHs and C[bond, double bond]O groups associated with the GOQDs. The Raman spectrum showed the typical G and D bands of GOQDs. The size of the GOQDs, calculated by Transmission Electron Microscopy (TEM) was 6 nm; additionally, by high resolution TEM (HRTEM), an interplanar distance of 0.19 nm corresponding to the (002) direction of the graphene oxide was calculated. The SA was achieved using the photodeposition technique of the GOQDs onto the core of a single-mode optical fiber. The nonlinear characterization (NLC) of the GOQDs was carried out using the P-scan technique with a high-gain erbium-doped fiber amplifier (EDFA) at a wavelength of 1550 nm. The obtained results showed a saturable absorption behavior with a value of ß=-1.178x10-6(m/W) and a non-linear susceptibility of Im(χ(3))≈-1.573x10-7(esu). The experimental results of the SA, based on GOQDs as a switching device in a fiber laser, showed a typical behavior of a Q-switched laser by generating a pulsed emission at a wavelength of 1599 nm, a frequency from 2 to 16 kHz, and a maximum average output power of 1.3 mW.

2.
Heliyon ; 9(1): e12986, 2023 Jan.
Article in English | MEDLINE | ID: mdl-36704290

ABSTRACT

The nonlinear optical response of graphene oxide quantum dots (GOQDs) fabricated by the carbonization and exfoliation of electrospun polyacrylonitrile (PAN) fibers is reported. Electrospun and carbonized fibers were characterized by SEM and XPS. SEM micrograph confirmed the formation of PAN fibers of 153.44 ± 6.44 nm, while by XPS the binding energies associated with sp2 and sp3 carbon hybridizations were found, after the carbonization process. On the other hand, the GOQDs obtained were characterized by photoluminescence (PL), UV-Vis, Raman spectroscopy, and High-Resolution Transmission Electron Microscopy (HRTEM). The GOQDs size of 10 nm was estimated by HRTEM. Raman spectroscopy showed the D and G bands associated with the sp2 and sp3 hybridizations of the GOQDs, by PL two energy values of 2.67 and 2.97 eV were calculated. The UV-Vis spectrum showed two absorption bands confirming the presence of GOQDs. The nonlinear characterization was carried out using the P-scan technique, previously photodepositing GOQDs onto an optical fiber, using a coherent radiation source at a wavelength of 1550 nm. The results obtained showed a saturable absorption behavior with a value of ß = - 2.474 × 10 - 4 m / W and a nonlinear susceptibility of χ ( 3 ) ≈ - 7.749 × 10 - 4 ( e s u ) . The results of this work showed that GOQDs obtained can be used for optical switching applications.

3.
Opt Express ; 29(15): 23439-23446, 2021 Jul 19.
Article in English | MEDLINE | ID: mdl-34614609

ABSTRACT

In this paper, we present a novel mechanism for the generation of laser pulses based on the phenomenon of thermocavitation. Thermocavitation bubbles were generated within a glass cuvette filled with copper nitrate dissolved in water, where the tip of an optical fiber was placed very close to the bubble generation region. Once the bubble is generated, it expands rapidly and the incoming laser light transmitted through the optical fiber is reflected at the vapor-solution interface and reflected back into the fiber, which is coupled to an erbium-doped fiber ring laser. Laser pulses were extracted from the ring cavity and detected by a fast photodetector, which corresponds to a single thermocavitation event, obtaining a pulse repetition rate from 118 Hz to 2 kHz at 1560 nm, with a pulse width ranging from 64 to 57 µs. The repetition rate can be controlled by adjusting the laser power to induce thermocavitation. To our knowledge, this novel mechanism of laser pulses has not been reported in the literature.

4.
Opt Express ; 28(12): 17672-17682, 2020 Jun 08.
Article in English | MEDLINE | ID: mdl-32679972

ABSTRACT

The most common approach to optically generate and manipulate bubbles in liquids involves temperature gradients induced by CW lasers. In this work, we present a method to accomplish both the generation of microbubbles and their 3D manipulation in ethanol through optothermal forces. These forces are triggered by light absorption from a nanosecond pulsed laser (λ = 532 nm) at silver nanoparticles photodeposited at the distal end of a multimode optical fiber. Light absorbed from each laser pulse quickly heats up the silver-ethanol interface beyond the ethanol critical-point (∼ 243 °C) before the heat diffuses through the liquid. Therefore, the liquid achieves a metastable state and owing to spontaneous nucleation converted to a vapor bubble attached to the optical fiber. The bubble grows with semi-spherical shape producing a counterjet in the final stage of the collapse. This jet reaches the hot nanoparticles vaporizing almost immediately and ejecting a microbubble. This microbubble-generation mechanism takes place with every laser pulse (10 kHz repetition rate) leading to the generation of a microbubbles stream. The microbubbles' velocities decrease as they move away from the optical fiber and eventually coalesce forming a larger bubble. The larger bubble is attracted to the optical fiber by the Marangoni force once it reaches a critical size while being continuously fed with each bubble of the microbubbles stream. The balance of the optothermal forces owing to the laser-pulse drives the 3D manipulation of the main bubble. A complete characterization of the trapping conditions is provided in this paper.

5.
Opt Express ; 28(4): 4928-4937, 2020 Feb 17.
Article in English | MEDLINE | ID: mdl-32121723

ABSTRACT

Numerical simulations using the Finite-Difference Time-Domain method were used to study the propagation of an acoustic wave within a truncated ellipsoidal cavity. Based in our simulations, a fluidic device was designed and fabricated using a 3D printer in order to focus an acoustic wave more efficiently and expel a liquid jet. The device consists of an ellipsoidal shaped chamber filled with a highly absorbent solution at the operating wavelength (1064 nm) in order to create a vapor bubble using a continuous wavelength laser. The bubble rapidly expands and collapses emitting an acoustic wave that propagates inside the cavity, which was measured by using a needle hydrophone. The bubble collapse, and source of the acoustic wave, occurs in one focus of the cavity and the acoustic wave is focused on the other one, expelling a liquid jet to the exterior. The physical mechanism of the liquid jet generation is momentum transfer from the acoustic wave, which is strongly focused due to the geometry of the cavity. This mechanism is different to the methods that uses pulsed lasers for the same purpose. The maximum speed of the generated liquid microjets was approximately 20 m/s. One potential application of this fluidic device can be found for inkjet printing, coating and, maybe the most attractive, for drug delivery.

6.
Opt Express ; 26(6): 6653-6662, 2018 Mar 19.
Article in English | MEDLINE | ID: mdl-29609352

ABSTRACT

The generation and manipulation of microbubbles by means of temperature gradients induced by low power laser radiation is presented. A laser beam (λ = 1064 nm) is divided into two equal parts and coupled to two multimode optical fibers. The opposite ends of each fiber are aligned and separated a distance D within an ethanol solution. Previously, silver nanoparticles were photo deposited on the optical fibers ends. Light absorption at the nanoparticles produces a thermal gradient capable of generating a microbubble at the optical fibers end in non-absorbent liquids. The theoretical and experimental studies carried out showed that by switching the thermal gradients, it is possible to generate forces in opposite directions, causing the migration of microbubbles from one fiber optic tip to another. Marangoni force induced by surface tension gradients in the bubble wall is the driving force behind the manipulation of microbubbles. We estimated a maximum Marangoni force of 400nN for a microbubble with a radius of 110 µm.

7.
Opt Express ; 26(2): 1556-1563, 2018 Jan 22.
Article in English | MEDLINE | ID: mdl-29402029

ABSTRACT

In this work, the influence of induced losses on the saturable absorption by zinc nanoparticles photodeposited onto the core of an optical fiber end is reported. Samples with different losses were obtained by the photodeposition technique using a continuous wave laser at 1550 nm. The nonlinear absorption of the saturable absorber was characterized by the P-scan technique using a high-gain pulsed erbium-doped fiber amplifier. The results have demonstrated that for optical fibers with variable induced losses by deposited nanoparticles, the modulation depth increases proportionally based on the nonlinear absorption coefficient. With induced losses fixed at 3 dB, it was demonstrated that the modulation depth increased as a function of the optical power used in the photodeposition process. The saturation intensity of the saturable absorber presents small shifts for higher intensities.

8.
Appl Opt ; 56(25): 7167-7173, 2017 Sep 01.
Article in English | MEDLINE | ID: mdl-29047977

ABSTRACT

A high-velocity fluid stream ejected from an orifice or nozzle is a common mechanism to produce liquid jets in inkjet printers or to produce sprays among other applications. In the present research, we show the generation of liquid jets of controllable direction produced within a sessile water droplet by thermocavitation. The jets are driven by an acoustic shock wave emitted by the collapse of a hemispherical vapor bubble at the liquid-solid/substrate interface. The generated shock wave is reflected at the liquid-air interface due to acoustic impedance mismatch generating multiple reflections inside the droplet. During each reflection, a force is exerted on the interface driving the jets. Depending on the position of the generation of the bubble within the droplet, the mechanical energy of the shock wave is focused on different regions at the liquid-air interface, ejecting cylindrical liquid jets at different angles. The ejected jet angle dependence is explained by a simple ray tracing model of the propagation of the acoustic shock wave inside the droplet.

9.
Opt Express ; 23(14): 18721-9, 2015 Jul 13.
Article in English | MEDLINE | ID: mdl-26191931

ABSTRACT

In this work, the simultaneous presence of saturable (SA) and two-photon absorption (TPA) in zinc nanoparticles (ZnNPs) photodeposited onto the core of an optical fiber was studied in the nanosecond regime with the P-scan method using a high gain pulsed erbium-doped fiber amplifier. An analysis based on Mie theory was carried out to demonstrate the influence of the absorption coefficient with the particles sizes in the proximity of surface plasmon resonance (SPR). The shift from TPA to SA has been observed as the irradiance is increased. It was found that for irradiances lower than 5 MW/cm², TPA is dominant, whereas for irradiances higher than 5 MW/cm², the SA becomes dominant. Furthermore, the values of the nonlinear absorption coefficient and the imaginary part of third-order nonlinear optical susceptibility were calculated numerically from the transmittance measured. Such TPA makes ZnNPs a candidate for optical limiting applications, and SA makes them a candidate for applications in pulsed fiber laser systems.

10.
J Environ Sci Health B ; 50(8): 584-9, 2015.
Article in English | MEDLINE | ID: mdl-26065518

ABSTRACT

The absorption of pesticide endosulfan on the surface of gold nanoparticles results from the formation of micrometric structures (1-10 µm) with irregular shape because of the aggregation of individual particles. Such aggregation of gold nanoparticles after absorption of pesticide shows a surface-enhanced Raman scattering (SERS) spectrum, whose intensity depends on the concentration of endosulfan. In addition, the discoloration of the colloidal solution and a diminishing of the intensity of the surface plasmon resonance absorption from individual particles were observed by UV-visible spectroscopy. At the same time, a second band between 638 and 700 nm confirms the formation of aggregates of gold nanoparticles as the concentration of endosulfan increases. Finally, we used the SERS intensity of the S-O stretching vibration at 1239 cm(-1) from the SO3 group as a measure of concentration of pesticide endosulfan. This method could be used to estimate the level of pollution in water by endosulfan in a simple and practical form.


Subject(s)
Endosulfan/chemistry , Gold/chemistry , Metal Nanoparticles/chemistry , Pesticides/chemistry , Adsorption , Colloids , Endosulfan/analysis , Spectrophotometry, Ultraviolet , Spectrum Analysis, Raman/methods , Surface Plasmon Resonance , Water/chemistry , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/chemistry
11.
Opt Express ; 21(5): 6509-18, 2013 Mar 11.
Article in English | MEDLINE | ID: mdl-23482221

ABSTRACT

An experimental and theoretical study about selective photodeposition of metallic zinc nanoparticles onto an optical fiber end is presented. It is well known that metallic nanoparticles possess a high absorption coefficient and therefore trapping and manipulation is more challenging than dielectric particles. Here, we demonstrate a novel trapping mechanism that involves laser-induced convection flow (due to heat transfer from the zinc particles) that partially compensates both absorption and scattering forces in the vicinity of the fiber end. The gradient force is too small and plays no role on the deposition process. The interplay of these forces produces selective deposition of particles whose size is directly controlled by the laser power. In addition, a novel trapping mechanism termed convective-optical trapping is demonstrated.

12.
Opt Express ; 13(26): 10760-7, 2005 Dec 26.
Article in English | MEDLINE | ID: mdl-19503293

ABSTRACT

We examine the transmission characteristics of a NOLM device using a symmetrical coupler, highly twisted fiber, and a quarter-wave (QW) retarder plate introducing a polarization asymmetry in the loop. We demonstrate high dynamic range with controllable transmissivity, and good stability over long times. We experimentally study the transmission behavior for different input polarization states and distinguish between different polarization components of the output beam. Experiments are in good agreement with our theoretical approach previously published. Appropriate choice of the input and output polarizations allows a very high dynamic range. The adjustment of the QW retarder and input polarization enables tuning the critical power over a wide range.

SELECTION OF CITATIONS
SEARCH DETAIL
...