Structural flexibility of favipiravir and its structural analogues in solutions: experimental and computational insight.

Combined UV-vis and quantum chemical studies of the structural flexibility and tautomerism of 6-R-3-hydroxy-2-pyrazine carboxamides in solutions revealed that their keto-enol transformations are accompanied by the deprotonation of enol tautomers and the formation of the corresponding anionic species. Both the solvent and the 6-R substituent strongly influence the relative abundance of the above forms in solutions. Anions are not formed in 1,2-dichloroethane (DCE), but the probability of deprotonation in neutral water and N,N-dimethylformamide (DMF) increases in the order R = H < F < NO2. Only enol tautomers of all solutes are found in DCE. DMF stabilizes keto forms only moderately and assists much strongly in the deprotonation of all three compounds. Water tends to stabilize both keto tautomers and deprotonated anions: the keto form dominates in the case of R = H (antiviral drug T-1105), the anions are found exclusively for R = NO2, and the aqueous solution of another antiviral drug, favipiravir (R = F), contains both the keto tautomer and the anionic form. The results of quantum chemical free energy calculations are in agreement with the experimental observations.

The Reduction of Carbonyl Compounds with Dicyclopentylzinc: A New Example of Asymmetric Amplifying Autocatalysis.

A previously unknown reduction of carbonyl compounds with dicyclopentylzinc is reported. Aldehydes react in mild conditions yielding corresponding primary alcohols and cyclopentene. Although cyclohexanone and acetophenone are inert to dicyclopentylzinc, a variety of heterocyclic ketones reacted readily, yielding reasonable to high yields of corresponding secondary alcohols. When the reaction was catalyzed with (-)-(1R,2S)-ephedrine, 3-acetylpyridine (10) resulted in a high yield of (S)-1-(pyridin-3-yl)ethanol (19) with >99% ee. 5-Acetyl-2-bromopyridine (11) also provided the corresponding optically active alcohol 20, albeit with a much lower optical yield. When 10% of 19 with 92% ee was used as an autocatalyst, 55% yield of the same compound was obtained, with 95% ee and 96% ee in two independent experiments. A three-stage reaction sequence starting from "no chirality" reaction yielded 19 with 6% ee. Thus, amplifying autocatalysis was detected in the reaction of ketone 10 with dicylopentylzinc.

Influence of the Substituent's Size in the Phosphinate Group on the Conformational Possibilities of Ferrocenylbisphosphinic Acids in the Design of Coordination Polymers and Metal-Organic Frameworks.

This paper illustrates how the size and type of substituent R in the phosphinate group of ferrocenyl bisphosphinic acids can affect conformational possibilities and coordination packing. It also demonstrates that H-phosphinate plays a key role in variational mobility, while Me- or Ph- substituents of the phosphinate group can only lead to 0D complexes or 1D coordination polymer. Overall, this paper provides valuable insights into the design and construction of coordination polymers based on ferrocene-contained linkers. It sheds light on how different reaction conditions and substituents can affect conformational possibilities and coordination packing, which could have significant implications for developing new polymers with unique properties.

Chemical and Electrochemical Reductions of Monoiminoacenaphthenes.

Redox properties of monoiminoacenaphthenes (MIANs) were studied using various electrochemical techniques. The potential values obtained were used for calculating the electrochemical gap value and corresponding frontier orbital difference energy. The first-peak-potential reduction of the MIANs was performed. As a result of controlled potential electrolysis, two-electron one-proton addition products were obtained. Additionally, the MIANs were exposed to one-electron chemical reduction by sodium and NaBH4. Structures of three new sodium complexes, three products of electrochemical reduction, and one product of the reduction by NaBH4 were studied using single-crystal X-ray diffraction. The MIANs reduced electrochemically by NaBH4 represent salts, in which the protonated MIAN skeleton acts as an anion and Bu4N+ or Na+ as a cation. In the case of sodium complexes, the anion radicals of MIANs are coordinated with sodium cations into tetranuclear complexes. The photophysical and electrochemical properties of all reduced MIAN products, as well as neutral forms, were studied both experimentally and quantum-chemically.

Synthesis, Structure, and Electrochemical Properties of 2,3,4,5-Tetraphenyl-1-Monophosphaferrocene Derivatives.

Heteroleptic 2,3,4,5-tetraphenyl-1-monophosphaferrocene [FeCp(η5-PC4Ph4)] was obtained at a 62% yield through the reaction of lithium 2,3,4,5-tetraphenyl-1-monophosphacyclopentadienide Li(PC4Ph4) (1) with [FeCp(η6-C6H5CH3)][PF6]. The structure of 1-monophosphaferrocene 2 and its W(CO)5-complex 3 were confirmed by multinuclear NMR and single-crystal X-ray diffraction study and further supported by DFT calculations. Cyclic voltammetry demonstrated that [FeCp(η5-PC4Ph4)] 2 has a quasi-reversible oxidation wave. The comparison of the properties of phosphaferrocene 2 with those of W(CO)5-complex 3 shows the possibility of changing the coordination type during oxidation.

The Phosphinate Group in the Formation of 2D Coordination Polymer with Sm(III) Nodes: X-ray Structural, Electrochemical and Mössbauer Study.

A coordination polymer has been synthesized using ferrocene-based ligand-bearing phosphinic groups of 1,1'-ferrocene-diyl-bis(H-phosphinic acid)), and samarium (III). The coordination polymer's structure was studied by both single-crystal and powder XRD, TG, IR, and Raman analyses. For the first time, the Mössbauer effect studies were performed on ferrocenyl phosphinate and the polymer based on it. Additionally, the obtained polymer was studied by the method of cyclic and differential pulse voltammetry. It is shown that it has the most positive potential known among ferrocenyl phosphinate-based coordination polymers and metal-organic frameworks. Using the values of the oxidation potential, the polymer was oxidized and the ESR method verified the oxidized Fe(III) form in the solid state. Additionally, the effect of the size of the phosphorus atom substituent of the phosphinate group on the dimension of the resulting coordination compounds is shown.

Comparison of crystal structure and DFT calculations of triferrocenyl trithiophosphite's conformance.

A triferrocenyl trithiophosphite was studied by X-ray single-crystal diffraction. Triferrocenyl trithiophosphite has nine axes of internal rotation: three P-S bonds, three C-S bonds and three Fe-cyclopentadienyl axes. Rotation around the P-S bonds results in a totally asymmetric structure with three ferrocenylthio groups exhibiting different orientations towards the phosphorus lone electron pair (LEP). A comparison of DFT calculations and X-ray diffraction data is presented, herein we show which conformations are preferred for a given ligand.

Ferrocene-based P-chiral amidophosphinate: stereoselective synthesis and X-ray structural study.

Racemic and enantiopure ferrocene-based P-chiral amidophosphinates have been simply and stereoselectively synthesized by ortho-lithiation of rac- or (R)-Ugi's amine and further reaction with amidochlorophenylphosphinate Cl-P(O)(Ph)NEt2. This is the first example of an asymmetric reaction of ortho-lithiated Ugi's amine with tetracoordinated phosphorus(V) chlorides. The structures of rac- and (R)-Ugi's amine ferrocenyl(phenyl)phosphinic acid N,N-diethylamide have been extensively studied experimentally (NMR, X-ray analysis, electrochemistry). The CV first peak refers to the oxidation of the amine fragment, which is clearly seen when (R)-Ugi's amine ferrocenyl(phenyl)phosphinic acid N,N-diethylamide reacts with anhydrous acid. The addition of two equivalents of CF3COOH leads to the protonation of nitrogen atoms, and a classical reversible wave of oxidation of Fe(II) to Fe(III) is observed.

Synthesis and electrochemical properties of 3,4,5-tris(chlorophenyl)-1,2-diphosphaferrocenes.

A novel representative of sodium 3,4,5-triaryl-1,2-diphosphacyclopentadienide containing a chloro substituent in the meta-position of the aryl groups was obtained with a high yield based on the reaction of tributyl(1,2,3-triarylcyclopropenyl)phosphonium bromide and sodium polyphosphides. Further reaction of sodium 3,4,5-tris(3-chlorophenyl)-1,2-diphosphacyclopentadienide with [FeCp(η6-C6H5CH3)][PF6] complex gives a new 3,4,5-tris(3-chlorophenyl)-1,2-diphosphaferrocene. The electrochemical properties of 3,4,5-tris(3-chlorophenyl)-1,2-diphosphaferrocene were studied and compared to 3,4,5-tris(4-chlorophenyl)-1,2-diphosphaferrocene. It was found that the position of the chlorine atom on the aryl fragment has an influence on the reduction potential of 1,2-diphosphaferrocenes, while the oxidation potentials do not change.

Nickel Complexes in C‒P Bond Formation.

This review is a comprehensive account of reactions with the participation of nickel complexes that result in the formation of carbon-phosphorus (C‒P) bonds. The catalytic and non-catalytic reactions with the participation of nickel complexes as the catalysts and the reagents are described. The various classes of starting compounds and the products formed are discussed individually. The several putative mechanisms of the nickel catalysed reactions are also included, thereby providing insights into both the synthetic and the mechanistic aspects of this phosphorus chemistry.

Synthesis, structure, and electrochemical properties of 4,5-diaryl-1,2,3-triphosphaferrocenes and the first example of multi(phosphaferrocene).

The reaction between aryl substituted sodium 1,2,3-triphospholides or disodium bis(1,2,3-triphospholide) and [Fe(η6-(C6H5CH3)Cp]+[PF6]- in boiling diglyme results in pure 1,2,3-triphosphaferrocenes 1-3 or bis(1,2,3-triphosphaferrocene) 4, respectively, in good yields. The structure of all obtained 1,2,3-triphosphaferrocenes 1-4 has been extensively studied experimentally (NMR, UV-Vis spectroscopy, and X-ray analysis for 1 and 4) and quantum chemically. The electrochemical properties of 1,2,3-triphosphaferrocenes 1-4 in the solid state were studied for the first time and a reversible one-electron oxidation (E1/2 = 0.52-0.92 V vs. Fc+/Fc) was demonstrated for 1, 3, and 4. In the case of 1,4-bis(5-phenyl-4-(1,2,3-triphospaferrocenyl))benzene 4, consecutive oxidation in the solid state is observed in contrast to other 1,2,3-triphosphaferrocenes 1-3. According to the ESR data, the g-factor of the oxidized bis(1,2,3-triphosphaferrocene), 4 (g = 2.12) is different from the g-factors of oxidized 1,2,3-triphosphaferrocenes 1-3 (g = 2.01). This is the first example of multi(ferrocenyl) systems based on the phosphaferrocene motif, which in turn opens up a new fundamental platform for the preparation of compounds with stimuli-responsive properties.

Conjugation in and optical properties of 1-R-1,2-diphospholes and 1-R-phospholes.

The strength of conjugation between the diene moieties of 1-R-1,2-diphospholes and 1-R-phospholes and exocyclic phenyl groups of these P-heteroles has been quantitatively characterized by the use of Raman activities of the bands of the phenyl substituents. It is shown that conjugation in both types of phospholes is very similar to the conjugation of phenyl groups with the diene system of cyclopentadiene. Introduction of substituents (-OMe, -C(═O)H, -NO2, -NMe2, and -CH═CH2) in the para-position of the phenyl groups of 1-R-1,2-diphospholes extends π-delocalization of exocyclic groups into the electronic system of the 1,2-diphosphole ring, producing bathochromic shifts of the absorption bands up to 63 nm. In contrast, hypsochromic shifts up to 40 nm can be achieved by introduction of SnMe3 or SiMe3 groups at the phosphorus(III) atom of the 1,2-diphosphole and concomitant increase of aromaticity of the P-heterole. Conjugation shifts the "centre of gravity" of the whole electronic absorption spectrum, whereas positions of separate absorption bands are not simply dependent on conjugation lengths.

Application of time-dependent density functional theory and optical spectroscopy toward the rational design of novel 3,4,5-triaryl-1-R-1,2-diphospholes.

Twenty 3,4,5-triaryl-1-R-1,2-diphospholes were studied within the framework of density functional theory (DFT) and experimentally by UV/vis spectroscopy to check their suitability for opto-electronic applications. Time-dependent DFT (TD-DFT) calculations employing the PBE0 hybrid density functional combined with moderately sized def-TZVP basis set were shown to excellently reproduce the experimental absorption spectra of various 1,2-diphospholes. Frontier molecular orbital analysis reveals that HOMO and LUMO are mainly localized on the diphosphole ring and, to some extent, on the aryl moieties. The HOMO-LUMO energy gap can be easily tuned by variation of substituents introduced in para-positions of the aryl moieties and, to a lesser extent, by modification of the R group at phosphorus atom. As a result, both position and intensity of the absorption bands with highest wavelength are strongly influenced by the above structural changes. The UV-spectra simulations reveal that the introduction of donor groups like para-OMe, para-NMe2, and para-N(H)Ph, which are in n-π conjugation with the aryl moieties, should result in absorption of visible light by the corresponding 1,2-diphospholes, thus making them promising candidates for new functional materials.