A Simplified and Efficient Process for Insulin Production in Pichia pastoris.

A significant barrier to insulin is affordability. In this manuscript we describe improvements to key steps in the insulin production process in Pichia pastoris that reduce cost and time. The strategy for recovery and processing of human insulin precursor has been streamlined to two steps from bioreactor to the transpeptidation reaction. In the first step the insulin precursor secreted during the methanol induction phase is recovered directly from the culture broth using Tangential Flow Filtration with a Prostak™ module eliminating the laborious and time-consuming multi-step clarification, including centrifugation. In the second step the protein is applied at very high loadings on a cation exchange resin and eluted in a mixture of water and ethanol to obtain a concentrated insulin precursor, suitable for use directly in the transpeptidation reaction. Overall the yield from insulin precursor to human insulin was 51% and consisted of three purification chromatography steps. In addition we describe a method for recovery of the excess of H-Thr(tBu)-OtBu from the transpeptidation reaction mixture, one of the more costly reagents in the process, along with its successful reuse.

PEGylation of the peptide Bac7(1-35) reduces renal clearance while retaining antibacterial activity and bacterial cell penetration capacity.

The proline-rich antibacterial peptide Bac7(1-35) protects mice against Salmonella typhimurium infection, despite its rapid clearance. To overcome this problem the peptide was linked to a polyethylene glycol (PEG) molecule either via a cleavable ester bond or via a non-hydrolysable amide bond. Both the PEGylated conjugates retained most of the in vitro activity against S. typhimurium. In addition, the ester bond was cleaved in human serum or plasma, releasing a carboxymethyl derivative of Bac7(1-35) which accounts for a higher activity of this peptide with relative to the other, non-hydrolysable form. Both PEGylated peptides maintained the capacity of the unconjugated form to kill bacteria without permeabilizing the bacterial membranes, by penetrating into cells. They exploited the same transporter as unmodified Bac7(1-35), suggesting it has the capacity to internalize quite sizeable cargo if this is linked to Bac7 fragment. PEGylation allows the peptide to have a wide distribution in mice, and a slow renal clearance, indicating that this strategy would improve the bioavailability of Bac7, and in principle of other antimicrobial peptides. This can be an equally important issue to reducing cytotoxicity for therapeutic use of these antibacterials.

Effect of size and N-terminal residue characteristics on bacterial cell penetration and antibacterial activity of the proline-rich peptide Bac7.

Bac7 is a proline-rich antimicrobial peptide, selective for Gram-negative bacteria, which acts intracellularly after membrane translocation. Progressively shortened fragments of Bac7 allowed determining the minimal sequence required for entry and antimicrobial activity as a 16-residue, N-terminal fragment, while further shortening led to a marked decrease in both functions. Furthermore, two N-terminal arginine residues were required for efficient translocation and activity. Analogues in which these residues were omitted, or where the side chain steric or physicochemical characteristics were systematically altered, were tested on different Escherichia coli strains, including a mutant with a destabilized outer membrane and one lacking the relevant SbmA membrane transport protein. H-bonding capacity, stereochemistry, and charge, in that order, played a determining role for efficient transit through both the outer and cytoplasmic membranes. Our studies allowed building a more detailed model for the mode-of-action of Bac7, and confirming its potential as an anti-infective agent, also suggesting it may be a vehicle for internalization of other antibiotic cargo.

Novel protocol for the chemical synthesis of crustacean hyperglycemic hormone analogues--an efficient experimental tool for studying their functions.

The crustacean Hyperglycemic Hormone (cHH) is present in many decapods in different isoforms, whose specific biological functions are still poorly understood. Here we report on the first chemical synthesis of three distinct isoforms of the cHH of Astacus leptodactylus carried out by solid phase peptide synthesis coupled to native chemical ligation. The synthetic 72 amino acid long peptide amides, containing L- or D-Phe³ and (Glp¹, D-Phe³) were tested for their biological activity by means of homologous in vivo bioassays. The hyperglycemic activity of the D-isoforms was significantly higher than that of the L-isoform, while the presence of the N-terminal Glp residue had no influence on the peptide activity. The results show that the presence of D-Phe³ modifies the cHH functionality, contributing to the diversification of the hormone pool.

Use of unnatural amino acids to probe structure-activity relationships and mode-of-action of antimicrobial peptides.

Endogenous antimicrobial peptides (AMPs) can have multimodal mechanisms of bacterial inactivation, such as membrane lysis, interference with cell wall biosynthesis or membrane-based protein machineries, or translocation through the membrane to intracellular targets. The controlled variation of side-chain characteristics in their amino acid residues can provide much useful information on structure-activity relationships and mode-of-action, and also lead to improved activities. The small size and relatively low complexity of AMPs make them amenable to solid-phase peptide synthesis, facilitating the use of nonproteinogenic amino acids and vastly increasing the accessible molecular diversity of side chains. Here, we describe how such residues can be used to modulate such key parameters as cationicity, hydrophobicity, steric factors conformational stability, and H-bonding.

Functional interactions of DNA topoisomerases with a human replication origin.

The human DNA replication origin, located in the lamin B2 gene, interacts with the DNA topoisomerases I and II in a cell cycle-modulated manner. The topoisomerases interact in vivo and in vitro with precise bonds ahead of the start sites of bidirectional replication, within the pre-replicative complex region; topoisomerase I is bound in M, early G1 and G1/S border and topoisomerase II in M and the middle of G1. The Orc2 protein competes for the same sites of the origin bound by either topoisomerase in different moments of the cell cycle; furthermore, it interacts on the DNA with topoisomerase II during the assembly of the pre-replicative complex and with DNA-bound topoisomerase I at the G1/S border. Inhibition of topoisomerase I activity abolishes origin firing. Thus, the two topoisomerases are closely associated with the replicative complexes, and DNA topology plays an essential functional role in origin activation.

Heterologous expression, purification, crystallization, X-ray analysis and phasing of the acetyl xylan esterase from Bacillus pumilus.

Bacillus pumilus PS213 acetyl xylan esterase (AXE) acts as an accessory enzyme in the plant cell wall hemicellulose biodegradation pathway. It belongs to the carbohydrate esterase family 7 and hydrolyses the ester linkages of the acetyl groups in position 2 and/or 3 of the xylose moieties of the acetylated xylan fragments from hardwood. The enzyme displays activity towards a broad range of acetylated compounds including the antibiotic cephalosporin-C. In this study we report the heterologous expression, purification, physicochemical characterization and crystallization of the recombinant B. pumilus AXE. Remarkable improvement of the crystal quality was achieved by setting up crystallization conditions, at first established using the hanging drop vapor diffusion method, in a micro-batch experiment. Rod-like diffraction quality crystals were obtained using 10% PEG 6000, 0.1 M MES pH 6.0 and a wide range of LiCl concentrations (0.2-1.0 M) as precipitant agent. Two different crystal forms, both belonging to space group P2(1), were characterized, diffracting X-rays to 2.5 and 1.9 angstrom resolution. Successful molecular replacement showed 12 molecules in the asymmetric unit of either crystal forms that are arranged as two doughnut-like hexamers, each one encompassing a local 32 symmetry. A catalytic inactive mutant Ser181Ala of B. pumilus AXE was also engineered, expressed, purified and crystallized for functional and structural studies.

Efficient synthesis and comparative studies of the arginine and Nomega,Nomega-dimethylarginine forms of the human nucleolin glycine/arginine rich domain.

The Gly- and Arg-rich C-terminal region of human nucleolin is a 61-residue long domain involved in a number of protein-protein and protein-nucleic acid interactions. This domain contains 10 aDma residues in the form of aDma-GG repeats interspersed with Phe residues. The exact role of Arg dimethylation is not known, partly because of the lack of efficient synthetic methods. This work describes an effective synthetic strategy, generally applicable to long RGG peptides, based on side-chain protected aDma and backbone protected dipeptide Fmoc-Gly-(Dmob)Gly-OH. This strategy allowed us to synthesize both the unmodified (N61Arg) and the dimethylated (N61aDma) peptides with high yield ( approximately 26%) and purity. As detected by NMR spectroscopy, N61Arg does not possess any stable secondary or tertiary structure in solution and N(omega),N(omega)-dimethylation of the guanidino group does not alter the overall conformational propensity of this peptide. While both peptides bind single-stranded nucleic acids with similar affinities (K(d) = 1.5 x 10(-7) M), they exhibit a different behaviour in ssDNA affinity chromatography consistent with the difference in pK(a) values. It has been previously shown that N61Arg inhibits HIV infection at the stage of HIV attachment to cells. This study demonstrates that Arg-dimethylated C-terminal domain lacks any inhibition activity, raising the question of whether nucleolin expressed on the cell-surface is indeed dimethylated.

DNA-mediated assembly of weakly interacting DNA-binding protein subunits: in vitro recruitment of phage 434 repressor and yeast GCN4 DNA-binding domains.

The specificity of DNA-mediated protein assembly was studied in two in vitro systems, based on (i) the DNA-binding domain of bacteriophage 434 repressor cI (amino acid residues 1-69), or (ii) the DNA-binding domain of the yeast transcription factor GCN4, (amino acids 1-34) and their respective oligonucleotide cognates. In vivo, both of these peptides are part of larger protein molecules that also contain dimerization domains, and the resulting dimers recognize cognate palindromic DNA sequences that contain two half-sites of 4 bp each. The dimerization domains were not included in the peptides tested, so in solution-in the presence or absence of non-cognate DNA oligonucleotides-these molecules did not show appreciable dimerization, as determined by pyrene excimer fluorescence spectroscopy and oxidative cross-linking monitored by mass spectrometry. Oligonucleotides with only one 4 bp cognate half-site were able to initiate measurable dimerization, and two half-sites were able to select specific dimers even from a heterogeneous pool of molecules of closely related specificity (such as DNA-binding domains of the 434 repressor and their engineered mutants that mimic the binding helix of the related P22 phage repressor). The fluorescent technique allowed us to separately monitor the unspecific, ionic interaction of the peptides with DNA which produced a roughly similar signal in the case of both cognate and non-cognate oligonucleotides. But in the former case, a concomitant excimer fluorescence signal showed the formation of correctly positioned dimers. The results suggest that DNA acts as a highly specific template for the recruitment of weakly interacting protein molecules that can thus build up highly specific complexes.

Fragmentation pathways of N(G)-methylated and unmodified arginine residues in peptides studied by ESI-MS/MS and MALDI-MS.

Protein methylation at arginine residues is a prevalent posttranslational modification in eukaryotic cells that has been implicated in processes from RNA-binding and transporting to protein sorting and transcription activation. Three main forms of methylarginine have been identified: N(G)-monomethylarginine (MMA), asymmetric N(G),N(G)-dimethylarginine (aDMA), and symmetric N(G),N'(G)-dimethylarginine (sDMA). To investigate gas-phase fragmentations and characteristic ions arising from methylated and unmodified arginine residues in detail, we subjected peptides containing these residues to electrospray triple-quadrupole tandem mass spectrometry. A variety of low mass ions including (methylated) ammonium, carbodiimidium, and guanidinium ions were observed. Fragment ions resulting from the loss of the corresponding neutral fragments (amines, carbodiimide, and guanidine) from intact molecular ions as well as from N- and C-terminal fragment ions were also identified. Furthermore, the peptides containing either methylated or unmodified arginines gave rise to abundant fragment ions at m/z 70, 112, and 115, for which cyclic ion structures are proposed. Electrospray ionization tandem mass spectra revealed that dimethylammonium (m/z 46) is a specific marker ion for aDMA. A precursor ion scanning method utilizing this fragment ion was developed, which allowed sensitive and specific detection of aDMA-containing peptides even in the presence of a five-fold excess of phosphorylase B digest. Interestingly, regular matrix-assisted laser desorption/ionization mass spectra recorded from aDMA- or sDMA-containing peptides showed metastable fragment ions resulting from cleavages of the arginine side chains. The neutral losses of mono- and dimethylamines permit the differentiation between aDMA and sDMA.

Oxidative folding of Amaranthus alpha-amylase inhibitor: disulfide bond formation and conformational folding.

Oxidative folding is the fusion of native disulfide bond formation with conformational folding. This complex process is guided by two types of interactions: first, covalent interactions between cysteine residues, which transform into native disulfide bridges, and second, non-covalent interactions giving rise to secondary and tertiary protein structure. The aim of this work is to understand both types of interactions in the oxidative folding of Amaranthus alpha-amylase inhibitor (AAI) by providing information both at the level of individual disulfide species and at the level of amino acid residue conformation. The cystine-knot disulfides of AAI protein are stabilized in an interdependent manner, and the oxidative folding is characterized by a high heterogeneity of one-, two-, and three-disulfide intermediates. The formation of the most abundant species, the main folding intermediate, is favored over other species even in the absence of non-covalent sequential preferences. Time-resolved NMR and photochemically induced dynamic nuclear polarization spectroscopies were used to follow the oxidative folding at the level of amino acid residue conformation. Because this is the first time that a complete oxidative folding process has been monitored with these two techniques, their results were compared with those obtained at the level of an individual disulfide species. The techniques proved to be valuable for the study of conformational developments and aromatic accessibility changes along oxidative folding pathways. A detailed picture of the oxidative folding of AAI provides a model study that combines different biochemical and biophysical techniques for a fuller understanding of a complex process.

Vicinal disulfide turns.

The formation of a disulfide bond between adjacent cysteine residues is accompanied by the formation of a tight turn of the protein backbone. In nearly 90% of the structures analyzed a type VIII turn was found. The peptide bond between the two cysteines is in a distorted trans conformation, the omega torsion angle ranges from 159 to -133 degrees, with an average value of 171 degrees. The constrained nature of the vicinal disulfide turn and the pronounced difference observed between the oxidized and reduced states, suggests that vicinal disulfides may be employed as a 'redox-activated' conformational switch.

Oxidative folding intermediates with nonnative disulfide bridges between adjacent cysteine residues.

The oxidative folding of the Amaranthus alpha-amylase inhibitor, a 32-residue cystine-knot protein with three disulfide bridges, was studied in vitro in terms of the disulfide content of the intermediate species. A nonnative vicinal disulfide bridge between cysteine residues 17 and 18 was found in three of five fully oxidized intermediates. One of these, the most abundant folding intermediate (MFI), was further analyzed by (1)H NMR spectroscopy and photochemically induced dynamic nuclear polarization, which revealed that it has a compact structure comprising slowly interconverting conformations in which some of the amino acid side chains are ordered. NMR pulsed-field gradient diffusion experiments confirmed that its hydrodynamic radius is indistinguishable from that of the native protein. Molecular modeling suggested that the eight-membered ring of the vicinal disulfide bridge in MFI may be located in a loop region very similar to those found in experimentally determined 3D structures of other proteins. We suggest that the structural constraints imposed on the folding intermediates by the nonnative disulfides, including the vicinal bridge, may play a role in directing the folding process by creating a compact fold and bringing the cysteine residues into close proximity, thus facilitating reshuffling to native disulfide bridges.

Plant growth-promoting Pseudomonas putida WCS358 produces and secretes four cyclic dipeptides: cross-talk with quorum sensing bacterial sensors.

The most universal cell-cell signaling mechanism in Gram-negative bacteria occurs via the production and response to a class of small diffusible molecules called N-acylhomoserine lactones (AHLs). This communication is called quorum sensing and is responsible for the regulation of several physiological processes and many virulence factors in pathogenic bacteria. The detection of these molecules has been rendered possible by the utilization of genetically engineered bacterial biosensors which respond to the presence of exogenously supplied AHLs. In this study, using diverse bacterial biosensors, several biosensor activating fractions were purified by organic extraction, HPLC and TLC of cell-free culture supernatants of plant growth-promoting Pseudomonas putida WCS358. Surprisingly, it was observed that the most abundant compounds in these fractions were cyclic dipeptides (diketopiperazines, DKPs), a rather novel finding in Gram-negative bacteria. The purification, characterization, chemical synthesis of four DKPs are reported and their possible role in cell-cell signaling is discussed.