Coherent mode coupling in highly efficient top-emitting OLEDs on periodically corrugated substrates.

Bragg scattering at one-dimensional corrugated substrates allows to improve the light outcoupling from top-emitting organic light-emitting diodes (OLEDs). The OLEDs rely on a highly efficient phosphorescent pin stack and contain metal electrodes that introduce pronounced microcavity effects. A corrugated photoresist layer underneath the bottom electrode introduces light scattering. Compared to optically optimized reference OLEDs without the corrugated substrate, the corrugation increases light outcoupling efficiency but does not adversely affect the electrical properties of the devices. The external quantum efficiency (EQE) is increased from 15 % for an optimized planar layer structure to 17.5 % for a corrugated OLED with a grating period of 1.0 µm and a modulation depth of about 70 nm. Detailed analysis and optical modeling of the angular resolved emission spectra of the OLEDs provide evidence for Bragg scattering of waveguided and surface plasmon modes that are normally confined within the OLED stack into the air-cone. We observe constructive and destructive interference between these scattered modes and the radiative cavity mode. This interference is quantitatively described by a complex summation of Lorentz-like resonances.

Doped organic transistors operating in the inversion and depletion regime.

The inversion field-effect transistor is the basic device of modern microelectronics and is nowadays used more than a billion times on every state-of-the-art computer chip. In the future, this rigid technology will be complemented by flexible electronics produced at extremely low cost. Organic field-effect transistors have the potential to be the basic device for flexible electronics, but still need much improvement. In particular, despite more than 20 years of research, organic inversion mode transistors have not been reported so far. Here we discuss the first realization of organic inversion transistors and the optimization of organic depletion transistors by our organic doping technology. We show that the transistor parameters--in particular, the threshold voltage and the ON/OFF ratio--can be controlled by the doping concentration and the thickness of the transistor channel. Injection of minority carriers into the doped transistor channel is achieved by doped contacts, which allows forming an inversion layer.

Cross-linkable molecular glasses: low dielectric constant materials patternable in hydrofluoroethers.

We report a new approach to solution-processable low-dielectric-constant (low-k) materials including photolithographic patterning of these materials in chemically benign and environmentally friendly solvents. A series of semiperfluorinated molecular glasses with styrenic substituents were successfully synthesized. These small molecular materials were thermally stable up to 400 degrees C and also exhibited an amorphous nature, which is essential to forming uniform films. Differential scanning calorimetry studies revealed that a cross-linking reaction occurred in the presence of acid, resulting in the formation of robust polymeric films. Atomic force microscopy images of the cross-linked films showed uniform and pinhole-free surface properties. Dielectric constants determined by a capacitance measurement were 2.6-2.8 (100 kHz) at ambient conditions, which are comparable to other polymeric low-k materials. The incorporation of semiperfluorinated substituents was effective in decreasing the dielectric constant; in particular, the fluorinated alkyl ether structure proved best. In addition, the fluorinated substituents contributed to good solubility in hydrofluoroether (HFE) solvents, which enabled the successful photolithographic patterning of those materials in HFEs down to a submicrometer scale.

Acid-sensitive semiperfluoroalkyl resorcinarene: an imaging material for organic electronics.

An acid-sensitive semiperfluoroalkyl resorcinarene was synthesized, and its lithographic properties were evaluated. Its solubility in segregated hydrofluoroether solvents enables the patterning of delicate organic electronic materials.