Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
Materials (Basel) ; 14(18)2021 Sep 13.
Article in English | MEDLINE | ID: mdl-34576476

ABSTRACT

Results of comparative structural characterization of bare and Zn-covered ZnTe nanowires (NWs) before and after thermal oxidation at 300 °C are presented. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, and Raman scattering not only unambiguously confirm the conversion of the outer layer of the NWs into ZnO, but also demonstrate the influence of the oxidation process on the structure of the inner part of the NWs. Our study shows that the morphology of the resulting ZnO can be improved by the deposition of thin Zn shells on the bare ZnTe NWs prior to the oxidation. The oxidation of bare ZnTe NWs results in the formation of separated ZnO nanocrystals which decorate crystalline Te cores of the NWs. In the case of Zn-covered NWs, uniform ZnO shells are formed, however they are of a fine-crystalline structure or partially amorphous. Our study provides an important insight into the details of the oxidation processes of ZnTe nanostructures, which could be of importance for the preparation and performance of ZnTe based nano-devices operating under normal atmospheric conditions and at elevated temperatures.

2.
Nanotechnology ; 32(24)2021 Mar 24.
Article in English | MEDLINE | ID: mdl-33690193

ABSTRACT

Gd2O3:1% Er3+, 18% Yb3+,x% Mg2+(x = 0; 2.5; 4; 5; 6; 8;10; 20; 25; 50) and Gd2O3:1% Er3+, 18% Yb3+, 2,5% Mg2+,y% Li+(y = 0.5-2.5) nanoparticles were synthesized by homogenous precipitation method and calcined at 900 °C for 3 h in air atmosphere. Powder x-ray diffraction, scanning electron microscopy, cathodoluminescence, transmission electron microscopy, energy dispersive x-ray spectroscopy and photoluminescence techniques were employed to characterize the obtained nanoparticles. We observed a 8-fold increase in red luminescence for samples suspended in DMSO solution for 2.5% of Mg2+doping. The x-ray analysis shows that for the concentration of 2.5% Mg, the size of the crystallites in the NPs is the largest, which is mainly responsible for the increase in the intensity of the upconversion luminescence. But the addition of Li+ions did not improve the luminescence of the upconversion due to decreasing of crystallites size of the NPs. Synthesized nanomaterials with very effective upconverting luminescence, can act as luminescent markers inin vivoimaging. The cytotoxicity of the nanoparticles was evaluated on the 4T1 cell line for the first time.

3.
Nanotechnology ; 29(2): 025702, 2018 01 12.
Article in English | MEDLINE | ID: mdl-29130898

ABSTRACT

Nanostructures as color-tunable luminescent markers have become major, promising tools for bioimaging and biosensing. In this paper separated molybdate/Gd2O3 doped rare earth ions (erbium, Er3+ and ytterbium, Yb3+) core-shell nanoparticles (NPs), were fabricated by a one-step homogeneous precipitation process. Emission properties were studied by cathodo- and photoluminescence. Scanning electron and transmission electron microscopes were used to visualize and determine the size and shape of the NPs. Spherical NPs were obtained. Their core-shell structures were confirmed by x-ray diffraction and energy-dispersive x-ray spectroscopy measurements. We postulated that the molybdate rich core is formed due to high segregation coefficient of the Mo ion during the precipitation. The calcination process resulted in crystallization of δ/ξ (core/shell) NP doped Er and Yb ions, where δ-gadolinium molybdates and ξ-molybdates or gadolinium oxide. We confirmed two different upconversion mechanisms. In the presence of molybdenum ions, in the core of the NPs, Yb3+-[Formula: see text] (∣2F7/2, 3T2〉) dimers were formed. As a result of a two 980 nm photon absorption by the dimer, we observed enhanced green luminescence in the upconversion process. However, for the shell formed by the Gd2O3:Er, Yb NPs (without the Mo ions), the typical energy transfer upconversion takes place, which results in red luminescence. We demonstrated that the NPs were transported into cytosol of the HeLa and astrocytes cells by endocytosis. The core-shell NPs are sensitive sensors for the environment prevailing inside (shorter luminescence decay) and outside (longer luminescence decay) of the tested cells. The toxicity of the NPs was examined using MTT assay.


Subject(s)
Erbium/chemistry , Gadolinium/chemistry , Luminescent Agents/chemistry , Molybdenum/chemistry , Nanoparticles/chemistry , Optical Imaging/methods , Ytterbium/chemistry , Astrocytes/cytology , HeLa Cells , Humans , Luminescent Measurements/methods , Microscopy, Confocal/methods , Nanoparticles/ultrastructure , Nanotechnology/methods
4.
Nano Lett ; 15(3): 1972-8, 2015 Mar 11.
Article in English | MEDLINE | ID: mdl-25710186

ABSTRACT

We study the impact of the nanowire shape anisotropy on the spin splitting of excitonic photoluminescence. The experiments are performed on individual ZnMnTe/ZnMgTe core/shell nanowires as well as on ZnTe/ZnMgTe core/shell nanowires containing optically active magnetic CdMnTe insertions. When the magnetic field is oriented parallel to the nanowire axis, the spin splitting is several times larger than for the perpendicular field. We interpret this pronounced anisotropy as an effect of mixing of valence band states arising from the strain present in the core/shell geometry. This interpretation is further supported by theoretical calculations which allow to reproduce experimental results.

5.
Nanoscale ; 5(16): 7410-8, 2013 Aug 21.
Article in English | MEDLINE | ID: mdl-23832244

ABSTRACT

Mn-doped GaAs nanowires were grown in the self-catalytic growth mode on the oxidized Si(100) surface by molecular beam epitaxy and characterized by scanning and transmission electron microscopy, Raman scattering, photoluminescence, cathodoluminescence, and electron transport measurements. The transmission electron microscopy studies evidenced the substantial accumulation of Mn inside the catalyzing Ga droplets on the top of the nanowires. Optical and transport measurements revealed that the limit of the Mn content for self-catalysed growth of GaAs nanowires corresponds to the doping level, i.e., it is much lower than the Mn/Ga flux ratio (about 3%) used during the MBE growth. The resistivity measurements of individual nanowires confirmed that they are conductive, in accordance with the photoluminescence measurements which showed the presence of Mn(2+) acceptors located at Ga sites of the GaAs host lattice of the nanowires. An anomalous temperature dependence of the photoluminescence related to excitons was demonstrated for Mn-doped GaAs nanowires.

6.
Nano Lett ; 8(11): 4061-5, 2008 Nov.
Article in English | MEDLINE | ID: mdl-18842031

ABSTRACT

It is shown that the growth of II-VI diluted magnetic semiconductor nanowires is possible by the catalytically enhanced molecular beam epitaxy (MBE). Zn(1-x)MnxTe NWs with manganese content up to x=0.60 were produced by this method. X-ray diffraction, Raman spectroscopy, and temperature dependent photoluminescence measurements confirm the incorporation of Mn(2+) ions in the cation substitutional sites of the ZnTe matrix of the NWs.

SELECTION OF CITATIONS
SEARCH DETAIL
...