Imidazole-Based Lithium Salt LiHDI as a Solid Electrolyte Interphase-Stabilising Additive for Lithium-Conducting Electrolytes.

Lithium salt LiHDI (lithium 4,5-dicyano-2-(n-heptafluoropropyl)imidazolide) is proposed as a solid electrolyte interphase-stabilising additive for lithium-ion batteries, which can be added in a smaller amount than fluoroethylene carbonate (FEC) and vinylene carbonate (VC) additives. Electrolytes containing either lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI) or battery-standard LiPF6 were tested with various amounts of LiHDI additive. Chemical stability in the presence of water and the thermal stability of LiHDI are on par with LiTDI. LiHDI additive does not negatively affect the properties of electrolytes. Conductivity measurements of solutions, galvanostatic cycling of graphite-LiFePO4 cells at room temperature, cells' cycling at 60 °C, internal cell resistance monitoring during cycling, and XPS analysis of electrodes' surfaces after cycling have been performed. LiHDI, unlike the FEC-VC mixture, does not negatively affect the properties of the electrolyte. Cycling showed improved capacity retention with LiHDI additive with both graphite and LiFePO4 as capacity-limiting electrodes over samples without additives. At elevated temperatures, samples with LiHDI exhibited better capacity retention during cycling than those with FEC-VC. Internal cell resistance can be correlated with capacity retention. XPS results show changes in the composition of SEI depending on the composition of the electrolyte and the duration of cycling.

A Comprehensive Investigation of the Structural, Thermal, and Biological Properties of Fully Randomized Biomedical Polyesters Synthesized with a Nontoxic Bismuth(III) Catalyst.

Aliphatic polyesters are the most common type of biodegradable synthetic polymer used in many pharmaceutical applications nowadays. This report describes the ring-opening polymerization (ROP) of l-lactide (L-LA), ε-caprolactone (CL) and glycolide (Gly) in the presence of a simple, inexpensive and convenient PEG200-BiOct3 catalytic system. The chemical structures of the obtained copolymers were characterized by 1H- or 13C-NMR. GPC was used to estimate the average molecular weight of the resulting polyesters, whereas TGA and DSC were employed to determine the thermal properties of polymeric products. The effects of temperature, reaction time, and catalyst content on the polymerization process were investigated. Importantly, the obtained polyesters were not cyto- or genotoxic, which is significant in terms of the potential for medical applications (e.g., for drug delivery systems). As a result of transesterification, the copolymers obtained had a random distribution of comonomer units along the polymer chain. The thermal analysis indicated an amorphous nature of poly(l-lactide-co-ε-caprolactone) (PLACL) and a low degree of crystallinity of poly(ε-caprolactone-co-glycolide) (PCLGA, Xc = 15.1%), in accordance with the microstructures with random distributions and short sequences of comonomer units (l = 1.02-2.82). Significant differences in reactivity were observed among comonomers, confirming preferential ring opening of L-LA during the copolymerization process.

Structural and Charge Transport Properties of Composites of Phosphate-Silicate Protonic Glass with Uranyl Hydroxy-Phosphate and Hydroxy-Arsenate Obtained by Mechano-Chemical Synthesis Undergoing Hydration Changes.

The introduction of the hydrogen economy, despite its obvious technological problems, creates a need for a significant number of niche-focused solutions, such as small-sized (10-100 W) fuel cells able to run on hydrogen of lesser purity than what is considered a standard in the case of PEMFCs. One of the solutions can be derived from the fact that an increase in the operational temperature of a cell significantly decreases its susceptibility to catalyst poisoning. Electrolytes suitable for the so-called medium temperature operational range of 120-400 °C, hence developed, are neither commercialized nor standardized. Among them, phosphate silicate protonically conductive glasses were found not only to reveal interestingly high levels of operational parameters, but also, to exhibit superior chemical and electrochemical stability over their polymeric counterparts. On the other hand, their mechanical properties, including cracking fragility, still need elaboration. Initial studies of the composite phosphate silicate glasses with uranyl-based protonic conductors, presented here, proved their value both in terms of application in fuel cell systems, and in terms of understanding the mechanism governing the charge transport mechanism in these and similar systems. It was found that whereas systems containing 10-20 wt% of the crystalline additive suffer from significant instability, materials containing 45-80 wt% (with an optimum at 60%) should be examined more thoughtfully. Moreover, the uranyl hydrogen phosphate was found to surpass its arsenate counterpart as an interesting self-healing behavior of the phase structure of the derived composite was proved.

Caffeine-Cyclodextrin Complexes as Solids: Synthesis, Biological and Physicochemical Characterization.

Mechanochemical and in-solution synthesis of caffeine complexes with α-, ß-, and γ-cyclodextrins was optimized. It was found that short-duration, low-energy cogrinding, and evaporation (instead of freeze-drying) are effective methods for the formation and isolation of these complexes. The products obtained, their pure components, and their mixtures were examined by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), FT-IR and Raman spectroscopy. Moreover, molecular modeling provided an improved understanding of the association process between the guest and host molecules in these complexes. The complexes were found to exhibit high toxicity in zebrafish (Danio rerio) embryos, in contrast to pure caffeine and cyclodextrins at the same molar concentrations. HPLC measurements of the caffeine levels in zebrafish embryos showed that the observed cytotoxicity is not caused by an increased caffeine concentration in the body of the organism, as the concentrations are similar regardless of the administered caffeine form. Therefore, the observed high toxicity could be the result of the synergistic effect of caffeine and cyclodextrins.

C60 in a peptidic cage: a case of symmetry mismatch studied by crystallography and solid-state NMR.

A supramolecular complex, formed by encapsulation of C60 fullerene in a molecular container built from two resorcin[4]arene rims zipped together by peptidic arms hydrogen bonded into a cylindrical ß-sheet, was studied by X-ray crystallography, solid-state and solution NMR, EPR spectroscopy and differential scanning calorimetry (DSC). The crystal structure, determined at 100 K, reveals that the complex occupies 422 site symmetry, which is compatible with the molecular symmetry of the container but not of the fullerene molecule, which has only 222 symmetry. The additional crystallographic symmetry leads to a complicated but discrete disorder, which could be resolved and modelled using advanced features of the existing refinement software. Solid-state NMR measurements at 184-333 K indicate that the thermal motion of C60 in this temperature range is fast but has different activation energies at different temperatures, which was attributed to a phase transition, which was confirmed by DSC. Intriguingly, the activation energy for reorientations of C60 in the solid state is very similar for the free and encaged molecules. Also, the rotational diffusion coefficients seem to be very similar or even slightly higher for the encaged fullerene compared to the free molecule. We also found that chemical shift anisotropy (CSA) is not the main relaxation mechanism for the 13C spins of C60 in the studied complex.

Fluorine-free electrolytes for all-solid sodium-ion batteries based on percyano-substituted organic salts.

A new family of fluorine-free solid-polymer electrolytes, for use in sodium-ion battery applications, is presented. Three novel sodium salts withdiffuse negative charges: sodium pentacyanopropenide (NaPCPI), sodium 2,3,4,5-tetracyanopirolate (NaTCP) and sodium 2,4,5-tricyanoimidazolate (NaTIM) were designed andtested in a poly(ethylene oxide) (PEO) matrix as polymer electrolytes for anall-solid sodium-ion battery. Due to unique, non-covalent structural configurations of anions, improved ionic conductivities were observed. As an example, "liquid-like" high conductivities (>1 mS cm-1) were obtained above 70 °C for solid-polymer electrolyte with a PEO to NaTCP molar ratio of 16:1. All presented salts showed high thermal stability and suitable windows of electrochemical stability between 3 and 5 V. These new anions open a new class of compounds with non-covalent structure for electrolytes system applications.

Lithium cation conducting TDI anion-based ionic liquids.

In this paper we present the synthesis route and electrochemical properties of new class of ionic liquids (ILs) obtained from lithium derivate TDI (4,5-dicyano-2-(trifluoromethyl)imidazolium) anion. ILs synthesized by us were EMImTDI, PMImTDI and BMImTDI, i.e. TDI anion with 1-alkyl-3-methylimidazolium cations, where alkyl meant ethyl, propyl and butyl groups. TDI anion contains fewer fluorine atoms than LiPF6 and thanks to C-F instead of P-F bond, they are less prone to emit fluorine or hydrogen fluoride due to the rise in temperature. Use of IL results in non-flammability, which is making such electrolyte even safer for both application and environment. The thermal stability of synthesized compounds was tested by DSC and TGA and no signal of decomposition was observed up to 250 °C. The LiTDI salt was added to ILs to form complete electrolytes. The structures of tailored ILs with lithium salt were confirmed by X-ray diffraction patterns. The electrolytes showed excellent properties regarding their ionic conductivity (over 3 mS cm(-1) at room temperature after lithium salt addition), lithium cation transference number (over 0.1), low viscosity and broad electrochemical stability window. The ionic conductivity and viscosity measurements of pure ILs are reported for reference.