Ultrasound induced grain refinement of crystallization in evaporative saline droplets.

We investigate the effect of ultrasound on the evaporation and crystallization of sessile NaCl solution droplets which were positioned in traveling or standing wave ultrasound field. The experimental results indicated that the ultrasound field can significantly accelerate the evaporation rate of the sessile droplets and refine the crystal grains. By adjusting the distance between the sessile droplets and the ultrasound emitter, it is found that, in traveling wave ultrasound field, the sessile droplet evaporation time and the time for the appearance of NaCl grains exhibited a fluctuating increase as the droplet-emitter distance increased. While in the standing wave ultrasound, the sessile droplet evaporation rate increases with the increasing droplet-emitter distance. Overall, the traveling wave ultrasound field has a stronger effect on grain refinement of the sessile droplets than the standing wave ultrasound field. The grain refinement is attributed to the decrease of critical nucleation radius caused by ultrasound energy and the increase of the nucleation rate caused by the accelerated evaporation rate. In addition, the breakage of grains caused by ultrasonic cavitation would also lead to grain refinement.

Evaporation of Saline Droplets on a Superhydrophobic Substrate: Formation of Crystal Shell and "Legs".

We studied the evaporation-driven crystallization in the droplets of sodium acetate anhydrous (CH3COONa) aqueous solution, which were deposited on superhydrophobic substrates. The results reveal distinct crystallization behaviors between saturated and unsaturated droplets under identical experimental conditions. Specifically, unsaturated droplets could form a quasi-spherical crystal shell on the superhydrophobic substrate, while saturated droplets could develop crystal legs between the droplet and substrate when the crystal shell formed. Subsequently, the saturated droplet was lifted off the substrate by the growing crystal legs. The formation of crystal shell was closely associated with the evaporation from the droplet surface and the internal convection inside the droplet. The formation of crystal legs was induced by the heterogeneous nucleation effect caused by the substrate of SiO2 nanoparticles. These findings provide valuable insights into regulating the morphology of salt crystallization through adjustments in salt solution concentration and substrate surface structure.

Toward Enhanced Aerosol Particle Adsorption in Never-Bursting Bubble via Acoustic Levitation and Controlled Liquid Compensation.

Bubbles in air are ephemeral because of gravity-induced drainage and liquid evaporation, which severely limits their applications, especially as intriguing bio/chemical reactors. In this work, a new approach using acoustic levitation combined with controlled liquid compensation to stabilize bubbles is proposed. Due to the suppression of drainage by sound field and prevention of capillary waves by liquid compensation, the bubbles can remain stable and intact permanently. It has been found that the acoustically levitated bubble shows a significantly enhanced particle adsorption ability because of the oscillation of the bubble and the presence of internal acoustic streaming. The results shed light on the development of novel air-purification techniques without consuming any solid filters.

Continuous air purification by aqueous interface filtration and absorption.

The adverse impact of particulate air pollution on human health1,2 has prompted the development of purification systems that filter particulates out of air3-5. To maintain performance, the filter units must inevitably be replaced at some point, which requires maintenance, involves costs and generates solid waste6,7. Here we show that an ion-doped conjugated polymer-coated matrix infiltrated with a selected functional liquid enables efficient, continuous and maintenance-free air purification. As the air to be purified moves through the system in the form of bubbles, the functional fluid provides interfaces for filtration and for removal of particulate matter and pollutant molecules from air. Theoretical modelling and experimental results demonstrate that the system exhibits high efficiency and robustness: its one-time air purification efficiency can reach 99.6%, and its dust-holding capacity can reach 950 g m-2. The system is durable and resistant to fouling and corrosion, and the liquid acting as filter can be reused and adjusted to also enable removal of bacteria or odours. We anticipate that our purification approach will be useful for the development of specialist air purifiers that might prove useful in a settings such as hospitals, factories and mines.

Dynamics of Rising Bubbles and Their Impact with Viscoelastic Fluid Interfaces.

Bubble dynamics plays a significant role in a wide range of industrial fields, such as food, pharmacy and chemical engineering. The physicochemical properties of complex fluids can greatly affect the speed with which bubbles rise, and the lifetime of bubbles, which in turn can affect the efficiency of food and drug manufacturing and also sewage purification. Therefore, it is of great scientific and practical significance to study the influence mechanism of nanoparticles and surfactants on bubble rising and impact in a complex fluid interface. This paper selects a mixed dispersion liquid of nanoparticles (SiO2) and a surfactant (SDS) as the objects of the study, observes in real-time the entire processes of bubbles rising, impact at the gas-liquid interface, and rupture, and analyzes the dynamic mechanism of bubble impact in a complex fluid interface. By analyzing the morphological changes of the rising bubbles, the rising velocity and the lifetime of the bubbles, it is found that the surfactant molecules are distributed in the ultrapure water liquid pool and the liquid film surrounding the bubbles. Such distribution can reduce the viscoelasticity between bubbles and the liquid surface, and lower the surface tension of the liquid, which can reduce the rising velocity of bubbles, delay the drainage process of bubbles on a liquid surface, and enhance the lifetime of bubbles. If the liquid surface is covered with nanoparticles, a reticulate structure will be formed on the bubble liquid film, which can inhibit bubble discharge and prolong bubble lifetime. In addition, the influence of such a reticulate structure on liquid surface tension is limited and its function is far smaller than a surfactant.

Evaporation Caused Invaginations of Acoustically Levitated Colloidal Droplets.

Controlled buckling of colloidal droplets via acoustic levitation plays an important role in pharmaceutical, coating, and material self-assembly. In this study, the evaporation process of PTFE colloidal droplets with two particle concentrations (60 wt% and 20 wt%) was investigated under acoustic levitation. We report the occurrence of surface invagination caused by evaporation. For the high particle concentration droplet, the upper surface was invaginated, eventually forming a bowl-shaped structure. While for the low particle concentration droplet, both the upper and lower surfaces of the droplet were invaginated, resulting in a doughnut-like structure. For the acoustically levitated oblate spherical droplet, the dispersant loss at the equatorial area of the droplet is greater than that at the two poles. Therefore, the thickness of the solid shell on the surface of the droplet was not uniform, resulting in invagination at the weaker pole area. Moreover, once the droplet surface was buckling, the hollow cavity on the droplet surface would absorb the sound energy and results in strong positive acoustic radiation pressure at bottom of the invagination, thus further prompting the invagination process.

Electromagnetic absorbers with Schottky contacts derived from interfacial ligand exchanging metal-organic frameworks.

Various types of polycrystals have been regarded as excellent electromagnetic (EM) microwave absorbents, while differentiated heterointerfaces among grains usually manipulate conductive loss and polarization relaxation, especially interfacial polarization. Herein, polar facets that dominated the optimization of EM attenuation were clarified by carefully designing polycrystalline Schottky junctions with metal-semiconductor contacts for the first time. An ingenious ligand exchange technique was utilized to construct Zn-MOF (ZIF-L) precursors for Fe-ZnO polycrystals, in which Fe-containing Fe(CN)63- etching ligand acted as metallic source in Schottky junctions. By adjusting the Schottky contacts in polycrystals, the enhanced grain boundaries mainly induced stronger interfacial polarization and affected the microcurrent lightly. This is because Schottky barriers can cause local charge accumulation on heterointerfaces for polarization relaxation. Additionally, the coexistence of Zn and O vacancies brought a lot of lattice defects and distortions for dipole polarization. Thus, optimal EM wave absorbability was obtained by polycrystals with 8 h ligand exchange and an effective absorption band reaching 4.88 GHz. This work can provide guidance for designing advanced polycrystalline EM absorption materials and also highlight the mechanism and requirement of Schottky junctions dominating polarization.

Tunable sulfur vacancies and hetero-interfaces of FeS2-based composites for high-efficiency electromagnetic wave absorption.

Controlling Vacancies and heterointerfaces of nano/microstuctures is very challenging, importantly, which tailors the electromagnetic (EM) parameters to develop the high-performance electromagnetic wave (EMW) absorbers. Herein, we report a strategy using various sulfur-source modifying Fe3O4 nanosphere by one-step hydrothermal method to prepare a series of FeS2-based composites. Diverse sulfur sources determine their morphologies, crystal structures and compositions, and further affect EMW absorption abilities. Among these materials, rich sulfur vacancies and abundant heterogeneous interfaces improve their conduction loss and polarization loss caused by a unique concave cubic polyhedrons structure of the Fe3O4/FeS2 composites fabricated by thioacetamide (TAA), which displays the brilliant EMW absorption capacity compared to others. That is, it possesses the minimum reflection loss (RLmin) of -59.27 dB and effective absorption bandwidth (EAB, RL ≤ -10 dB) of 5.86 GHz at the thin thickness of 1.8 mm. This study opens a new avenue for designing the superior EMW absorbers by tunable sulfur vacancy and heterointerface.

Interfacial viscoelasticity and jamming of colloidal particles at fluid-fluid interfaces: a review.

Colloidal particles can be adsorbed at fluid-fluid interfaces, a phenomenon frequently observed in particle-stabilized foams, Pickering emulsions, and bijels. Particles adsorbed at interfaces exhibit unique physical and chemical behaviors, which affect the mechanical properties of the interface. Therefore, interfacial colloidal particles are of interest in terms of both fundamental and applied research. In this paper, we review studies on the adsorption of colloidal particles at fluid-fluid interfaces, from both thermodynamic and mechanical points of view, and discuss the differences as compared with surfactants and polymers. The unique particle interactions induced by the interfaces as well as the particle dynamics including lateral diffusion and contact line relaxation will be presented. We focus on the rearrangement of the particles and the resultant interfacial viscoelasticity. Particular emphasis will be given to the effects of particle shape, size, and surface hydrophobicity on the interfacial particle assembly and the mechanical properties of the obtained particle layer. We will also summarize recent advances in interfacial jamming behavior caused by adsorption of particles at interfaces. The buckling and cracking behavior of particle layers will be discussed from a mechanical perspective. Finally, we suggest several potential directions for future research in this area.

Branching of interfacial cracks of carbon nanotube layers at the air-water interface⋆.

We study the surfactant-induced fracture of carbon nanotube layers at the air-water interface. The interfacial cracks exhibit branched morphologies. The propagation velocity V of the cracks follows a power law as [Formula: see text] , which is independent of the surface coverage of the layers as well as the surfactant concentration. However, the crack morphology changes from lightning-like to flower-like with the increasing of SDS concentration. A higher surfactant concentration does not accelerate the crack propagation velocity, whereas it significantly enhances the crack areas due to the stronger interfacial compression effect. Our results may shed light on the understanding of branching dynamics of interfacial cracks for 2-dimensional viscoelastic systems.

A General Approach to Free-Standing Nanoassemblies via Acoustic Levitation Self-Assembly.

Droplets suspended by acoustic levitation provide genuine substrate-free environments for understanding unconventional fluid dynamics, evaporation kinetics, and chemical reactions by circumventing solid surface and boundary effects. Using a fully levitated air-water interface by acoustic levitation in conjunction with drying-mediated nanoparticle self-assembly, here, we demonstrate a general approach to fabricating free-standing nanoassemblies, which can totally avoid solid surface effects during the entire process. This strategy has no limitation for the sizes or shapes of constituent metallic nanoparticle building blocks and can also be applied to fabricate free-standing bilayered and trilayered nanoassemblies or even three-dimensional hollow nanoassemblies. We believe that our strategy may be further extended to quantum dots, magnetic particles, colloids, etc. Hence, it may lead to a myriad of homogeneous or heterogeneous free-standing nanoassemblies with programmable functionalities.

Transparent Bioreactors Based on Nanoparticle-Coated Liquid Marbles for in Situ Observation of Suspending Embryonic Body Formation and Differentiation.

Transparent liquid marbles coated with hydrophobic silica nanoparticles were used as micro-bioreactors for embryonic stem cell (ESC) culturing. The high transparency of silica liquid marbles enables real-time and in situ monitoring of embryonic body (EB) formation and differentiation. The experimental result shows that ESCs can aggregate with each other close to the bottom of the liquid marble and form EBs, while remaining suspended in the culture media. The differentiation of the suspending EBs into contractile cardiomyocytes has been demonstrated inside the transparent liquid marbles, which enable the in situ microscopic observation. It was also found, through comparison, that ESCs in a bare sessile drop placed on a superhydrophobic substrate tend to anchor onto the substrate and then differentiate following the normal way of cell spreading, i.e., withdrawal from the cell cycle, fusion with nascent myotubes, and final differentiation into cardiomyocytes. In contrast, liquid marble particle shells weaken the adhesion of spherical EBs to the substrate, encouraging them to differentiate in suspension into cardiomyocytes, without anchoring. The results of this study highlight the promising performance of liquid marbles as "one-pot" micro-bioreactors for EB formation and differentiation.

Inducing drop to bubble transformation via resonance in ultrasound.

Bubble formation plays an important role in industries concerned with mineral flotation, food, cosmetics, and materials, which requires additional energy to produce the liquid-gas interfaces. A naturally observed fact is, owing to the effect of surface tension, a bubble film tends to retract to reduce its surface area. Here we show a "reverse" phenomenon whereby a drop is transformed into a bubble using acoustic levitation via acoustic resonance. Once the volume of the cavity encapsulated by the buckled film reaches a critical value V*, resonance occurs and an abrupt inflation is triggered, leading to the formation of a closed bubble. Experiments and simulations both reveal that V* decreases with increasing acoustic frequency, which agrees well with acoustic resonance theory. The results afford enlightening insights into acoustic resonance and highlight its role in manipulating buckled fluid-fluid interfaces, providing a reference for fabricating unique core-shell-like materials.

Fast Synthesis of Pt Nanocrystals and Pt/Microporous La2O3 Materials Using Acoustic Levitation.

Usually, we must use an appropriate support material to keep the metal species stable and finely dispersed as supported metal nanoparticles for industry application. Therefore, the choice of support material is a key factor in determining the dispersion and particle size of the noble metal species. Here, we report the synthesis of a single-atom Pt material in the solution and supported Pt nanoclusters on microporous La2O3 by a one-step acoustic levitation method without any pretreatment/modification of raw oxide. We have strongly contributed to the synthetic methodology of the surface/interfacial heterogeneous catalysts in this study, and this finding could open another door for synthesis of supported metal nanoparticles on porous materials for environmental catalysis.

Simulation of phase separation with temperature-dependent viscosity using lattice Boltzmann method.

This paper presents an exploration of the phase separation behavior and pattern formation in a binary fluid with temperature-dependent viscosity via a coupled lattice Boltzmann method (LBM). By introducing a viscosity-temperature relation into the LBM, the coupling effects of the viscosity-temperature coefficient [Formula: see text] , initial viscosity [Formula: see text] and thermal diffusion coefficient [Formula: see text] , on the phase separation were successfully described. The calculated results indicated that an increase in initial viscosity and viscosity-temperature coefficient, or a decrease in the thermal diffusion coefficient, can lead to the orientation of isotropic growth fronts over a wide range of viscosity. The results showed that droplet-type phase structures and lamellar phase structures with domain orientation parallel or perpendicular to the walls can be obtained in equilibrium by controlling the initial viscosity, thermal diffusivity, and the viscosity-temperature coefficient. Furthermore, the dataset was rearranged for growth kinetics of domain growth and thermal diffusion fronts in a plot by the spherically averaged structure factor and the ratio of separated and continuous phases. The analysis revealed two different temporal regimes: spinodal decomposition and domain growth stages, which further quantified the coupled effects of temperature and viscosity on the evolution of temperature-dependent phase separation. These numerical results provide guidance for setting optimum temperature ranges to obtain expected phase separation structures for systems with temperature-dependent viscosity.

Dynamic effects and adhesion of water droplet impact on hydrophobic surfaces: bouncing or sticking.

This work reported the dynamic effects of water droplet impact on flat, porous and pincushion structure films of star shaped polyhedral oligomeric silsesquioxane (POSS) fluorinated acrylates, POSS-poly(trifluoroethyl methacrylate)8 (POSS-(PTFEMA)8) and POSS-(poly(trifluoroethyl methacrylate)-b-poly(methyl methacrylate))8 (POSS-(PTFEMA-b-PMMA)8), using the breath figure method. The porous and pincushion structure films with different surface chemical compositions were obtained by controlling the copolymer structure and temperature and by stripping of the surface. The water contact angles on the different films were measured, and the water droplets on the pincushion structure films when reversed at 45°, 90°, 135° and 180° were also studied. It was found that the pincushion structure films revealed a water adhesion ability. Furthermore, the water droplet impact behavior on these films was investigated. The morphology variations of water droplets, spreading diameter of the droplets, energy conversion, restitution coefficient and adhesion force were examined. Finally, the schematic illustration of water droplets under the static and dynamic states in contact with the pincushion and porous structure surfaces was proposed. It is critical to materialize various applications such as microdroplet transportation, soil erosion, spray painting, anti-icing surface and antifouling agents for textiles.

Acoustic levitation of liquid drops: Dynamics, manipulation and phase transitions.

The technique of acoustic levitation normally produces a standing wave and the potential well of the sound field can be used to trap small objects. Since no solid surface is involved it has been widely applied for the study of fluid physics, nucleation, bio/chemical processes, and various forms of soft matter. In this article, we survey the works on drop dynamics in acoustic levitation, focus on how the dynamic behavior is related to the rheological properties and discuss the possibility to develop a novel rheometer based on this technique. We review the methods and applications of acoustic levitation for the manipulation of both liquid and solid samples and emphasize the important progress made in the study of phase transitions and bio-chemical analysis. We also highlight the possible open areas for future research.

Liquid Marble Coalescence and Triggered Microreaction Driven by Acoustic Levitation.

Liquid marbles show promising potential for application in the microreactor field. Control of the coalescence between two or among multiple liquid marbles is critical; however, the successful merging of two isolated marbles is difficult because of their mechanically robust particle shells. In this work, the coalescence of multiple liquid marbles was achieved via acoustic levitation. The dynamic behaviors of the liquid marbles were monitored by a high-speed camera. Driven by the sound field, the liquid marbles moved toward each other, collided, and eventually coalesced into a larger single marble. The underlying mechanisms of this process were probed via sound field simulation and acoustic radiation pressure calculation. The results indicated that the pressure gradient on the liquid marble surface favors the formation of a liquid bridge between the liquid marbles, resulting in their coalescence. A preliminary indicator reaction was induced by the coalescence of dual liquid marbles, which suggests that expected chemical reactions can be successfully triggered with multiple reagents contained in isolated liquid marbles via acoustic levitation.

Understanding desiccation patterns of blood sessile drops.

Desiccation of a blood sessile drop on a glass surface leads to the formation of interesting cracking patterns. These desiccation patterns have been identified to have three characteristic regions, i.e., peripheral, coronal and central regions. Driving forces responsible for the formation of cracking patterns are the redistribution of colloidal materials driven by a "coffee ring" effect and the time- and location-dependent development of internal stresses caused by water evaporation and progressive gelation from the drop edge to its center. Since the concentrations of colloidal materials, i.e., cellular components, protein macromolecules and other constituents (glucose, bilirubin and lipids) in blood, influence the cracking patterns, an understanding of these patterns can potentially reveal clues for the evaluation of health conditions and offer a low-cost diagnostic tool for human diseases. This study presents a mechanistic analysis of the pattern formation in desiccating blood sessile drops. We focus on the build-up and release of internal stresses by examining the cracking process. Optical and scanning electron microscopes (SEM) were used to capture the initiation, propagation and directions of cracks in different regions. The propagation and widening of orthoradial and radial cracks in relation to the adhesion and cohesion of the blood sessile drops were observed and characterized. New microscopic insights into internal stress releasing processes provide a new understanding of physical events occurring underneath the gelled film of the blood sessile drop and differences in the distribution of strain energy in different regions, which will aid our understanding of different cracking patterns in those regions.

Blood drop patterns: Formation and applications.

The drying of a drop of blood or plasma on a solid substrate leads to the formation of interesting and complex patterns. Inter- and intra-cellular and macromolecular interactions in the drying plasma or blood drop are responsible for the final morphologies of the dried patterns. Changes in these cellular and macromolecular components in blood caused by diseases have been suspected to cause changes in the dried drop patterns of plasma and whole blood, which could be used as simple diagnostic tools to identify the health of humans and livestock. However, complex physicochemical driving forces involved in the pattern formation are not fully understood. This review focuses on the scientific development in microscopic observations and pattern interpretation of dried plasma and whole blood samples, as well as the diagnostic applications of pattern analysis. Dried drop patterns of plasma consist of intricate visible cracks in the outer region and fine structures in the central region, which are mainly influenced by the presence and concentration of inorganic salts and proteins during drying. The shrinkage of macromolecular gel and its adhesion to the substrate surface have been thought to be responsible for the formation of the cracks. Dried drop patterns of whole blood have three characteristic zones; their formation as functions of drying time has been reported in the literature. Some research works have applied engineering treatment to the evaporation process of whole blood samples. The sensitivities of the resultant patterns to the relative humidity of the environment, the wettability of the substrates, and the size of the drop have been reported. These research works shed light on the mechanisms of spreading, evaporation, gelation, and crack formation of the blood drops on solid substrates, as well as on the potential applications of dried drop patterns of plasma and whole blood in diagnosis.