Magnetic cork composites as biosorbents in dispersive solid-phase extraction of pesticides in water samples.

This study assessed the use of magnetic biosorbents in dispersive solid-phase extraction with a gas chromatograph-electron capture detector for the determination of trifluralin, chlorothalonil, transfluthrin, bromopropylate, and bifenthrin in water samples. To our knowledge, this is the first time that magnetic cork composites are used as an adsorbent in dispersive solid-phase extraction. The advantages of magnetic cork composites include their density regulation and high surface areas. The magnetic composites can be recovered using a magnetic field for desorption purposes, which can improve the operation process and reduce the extraction time. Moreover, the parameters affecting the extraction performances were optimized. The method has a limit of detection between 0.30 and 2.02 µg L-1. Good linearities (R2 > 0.99) were obtained in the linear range of 1.00 to 2000 µg L-1. The relative recoveries of the analytes in tap water, river, and lake water samples spiked at different concentrations ranged between 90% and 104%, and the relative standard deviations were less than 7.1%. Therefore, this study showed that Fe3O4/cork magnetic composites can be used as efficient and eco-friendly biosorbents in dispersive solid-phase extraction for the determination of pesticides in water samples. The use of these composites contributes to the current trend of green chemistry.

Magnetic Persimmon Leaf Composite: Preparation and Application in Magnetic Solid-Phase Extraction of Pesticides in Water Samples.

In recent years, the utilization of biomass materials for the removal and detection of water pollutants has garnered considerable attention. This study introduces, for the first time, the preparation of Fe3O4/persimmon leaf magnetic biomass composites. The magnetic composites were employed in a magnetic solid-phase extraction method, coupled with gas chromatography-electron capture detection (GC-ECD), for the analysis of four pesticides (trifluralin, triadimefon, permethrin, and fenvalerate) in environmental water samples. The innovative magnetic persimmon leaf composites were synthesized by in situ generation of Fe3O4 nanoparticles through coprecipitation and loaded onto persimmon leaves. These composites exhibit superparamagnetism with a saturation magnetization of 12.8 emu g-1, facilitating rapid phase separation using a magnetic field and reducing the extraction time to 10 min. Desorption can be achieved within 30 s by aspirating 20 times, eliminating the need for time-consuming and labor-intensive experimental steps like filtration and centrifugation. The specific surface area of the magnetic composite adsorbent increased from 1.3279 m2 g-1 for the original persimmon leaf to 5.4688 m2 g-1. The abundant hydroxyl and carboxyl groups on the composites provide ample adsorption sites, resulting in adsorption capacities ranging from 55.056 mg g-1 to 73.095 mg g-1 for the studied pesticides. The composites exhibited extraction recoveries ranging from 80% to 90% for the studied pesticides. Compared to certain previously reported MSPE methods, this approach achieves equivalent or higher extraction recoveries in a shorter operation time, demonstrating enhanced efficiency and convenience. Good linearity of the target analytes was obtained within the range of 0.75-1500 µg L-1, with a determination of coefficient (R2) greater than 0.999. These findings contribute to the use of magnetic persimmon leaf biomass materials as effective and environmentally friendly adsorbents for pollutant determination in water samples.