Exploring surface properties and premelting in crystals.

Crystal surfaces play a pivotal role in governing various significant processes, such as adsorption, nucleation, wetting, friction, and wear. A fundamental property that influences these processes is the surface free energy, γ. We have directly calculated γ(T) for low-index faces of Lennard-Jones (LJ), germanium, and silicon crystals along their sublimation lines using the computational cleavage technique. Our calculations agree well with experimental values for Si(111) and Ge(111), highlighting the accuracy of the method and models used. For LJ crystals, we identified a premelting onset at Tpm = 0.75Tm, marked by a sharp increase in atom mobility within the second outermost surface layer. Notably, Tpm closely aligned with the endpoint of the LJ melting line at negative pressures, Tend = 0.76Tm. We hypothesize that the emergence and coexistence of a liquid film atop the LJ crystal at Tpm < T < Tm correspond to the metastable melting line under negative pressures experienced by stretched crystal surfaces. Furthermore, our study of thin LJ crystal slabs reveals that premelting-induced failure leads to recrystallization below the homogeneous freezing limit, offering a promising avenue to explore crystal nucleation and growth at extremely deep supercoolings. Finally, no evidence of premelting was detected in the model crystals of Ge and Si, which is consistent with the experimental observations. Overall, our findings offer valuable insights into crystal surface phenomena at the atomic scale.

Effectiveness and safety of biosilicate-enhanced bleaching gels on enamel with early erosion lesion.

AIM: This study evaluated the efficacy and cytotoxicity of 35% hydrogen peroxide (HP) gel incorporated with 10% (w/w) biosilicate (BioS) on sound enamel and early-stage enamel erosion lesions. METHODS: Discs of enamel/dentin were selected, subjected to erosive cycles (0.3% citric acid, pH 2.6), and treated with (n = 8): HP (35% HP, positive control); HP_BioS [carboxymethyl cellulose (CMC) + HP + BioS]; BioS (CMC + BioS); CMC (negative control). The discs were adapted to artificial pulp chambers with the enamel exposed for bleaching, and the dentin facing toward the culture medium (Dulbecco's modified Eagle's medium [DMEM]). Bleaching was performed in three 30-min sessions at 7-day intervals. After bleaching, the diffusion product (DMEM extract + diffused HP) was pipetted onto MDPC-23 odontoblastic cell line and inoculated. Color parameters (ΔL, Δa, Δb), color change (ΔE00), and changes in whiteness index (ΔWID) were determined before (T0) and after the last bleaching session (T3). Cell viability (MTT, %), H2O2 diffusion (µg/mL), oxidative cell stress (OxS), and cell fluorescence (live/dead assay, in confocal microscopy) were assessed (ANOVA/Tukey; α = 0.05). RESULTS: No difference in ΔL, Δa, Δb, ΔE00, and ΔWID were found between HP and HP_BioS (p > 0.05). The incorporation of BioS decreased the HP diffusion into the substrates and mitigated oxidative stress in early-stage eroded enamel (p < 0.05). HP_BioS presented significantly higher cell viability compared with HP under erosion conditions. Live/dead assay indicated that BioS_HP maintained viability with larger clusters of viable cells. CONCLUSION: Incorporating BioS into HP maintained bleaching effectiveness, favored cell viability, reduced the oxidative stress, and the cytotoxicity in teeth with early-stage erosion. CLINICAL SIGNIFICANCE: BioS formulation showed promising results for reducing cytotoxicity in patients seeking tooth bleaching and presenting undetectable early-stage erosion.

Novel Organic-Inorganic Nanocomposite Hybrids Based on Bioactive Glass Nanoparticles and Their Enhanced Osteoinductive Properties.

Inorganic-organic hybrid biomaterials have been proposed for bone tissue repair, with improved mechanical flexibility compared with scaffolds fabricated from bioceramics. However, obtaining hybrids with osteoinductive properties equivalent to those of bioceramics is still a challenge. In this work, we present for the first time the synthesis of a class II hybrid modified with bioactive glass nanoparticles (nBGs) with osteoinductive properties. The nanocomposite hybrids were produced by incorporating nBGs in situ into a polytetrahydrofuran (PTHF) and silica (SiO2) hybrid synthesis mixture using a combined sol-gel and cationic polymerization method. nBGs ~80 nm in size were synthesized using the sol-gel technique. The structure, composition, morphology, and mechanical properties of the resulting materials were characterized using ATR-FTIR, 29Si MAS NMR, SEM-EDX, AFM, TGA, DSC, mechanical, and DMA testing. The in vitro bioactivity and degradability of the hybrids were assessed in simulated body fluid (SBF) and PBS, respectively. Cytocompatibility with mesenchymal stem cells was assessed using MTS and cell adhesion assays. Osteogenic differentiation was determined using the alkaline phosphatase activity (ALP), as well as the gene expression of Runx2 and Osterix markers. Hybrids loaded with 5, 10, and 15% of nBGs retained the mechanical flexibility of the PTHF-SiO2 matrix and improved its ability to promote the formation of bone-like apatite in SBF. The nBGs did not impair cell viability, increased the ALP activity, and upregulated the expression of Runx2 and Osterix. These results demonstrate that nBGs are an effective osteoinductive nanoadditive for the production of class II hybrid materials with enhanced properties for bone tissue regeneration.

Kinetics of physical aging of a silicate glass following temperature up- and down-jumps.

In this article, we investigate the structural relaxation of lithium silicate glass during isothermal physical aging by monitoring the temporal evolution of its refractive index and enthalpy following relatively large (10-40 °C) up- and down-jumps in temperature. The Kohlrausch-Williams-Watts function aptly describes the up- and down-jump data when analyzed separately. For temperature down-jumps, the glass exhibits a typical stretched exponential kinetic behavior with the non-exponentiality parameter ß < 1, whereas up-jumps show a compressed exponential behavior (ß > 1). We analyzed these datasets using the non-exponential and non-linear Tool-Narayanaswamy-Moynihan (TNM) model, aiming to provide a comprehensive description of the primary or α-relaxation of the glass. This model described both up- and down-jump datasets using a single value of ß ≤ 1. However, the standard TNM model exhibited a progressively reduced capacity to describe the data for larger temperature jumps, which is likely a manifestation of the temperature dependence of the non-exponentiality or non-linearity of the relaxation process. We hypothesize that the compressed exponential relaxation kinetics observed for temperature up-jumps stems from a nucleation-growth-percolation-based evolution on the dynamically mobile regions within the structure, leading to a self-acceleration of the dynamics. On the other hand, temperature down-jumps result in self-retardation, as the slow-relaxing denser regions percolate in the structure to give rise to a stretched exponential behavior.

Using Antimicrobial Photodynamic Therapy with Ultrasound Devices and Bioactive Glasses as a Combined Approach for Treating Dentin Caries Lesions.

Novel approaches for caries lesion removal and treatment have been proposed. This study evaluates the combined use of an experimental ultrasound, aPDT (antimicrobial photodynamic therapy) and bioactive glasses on the removal, decontamination and remineralization of dentin caries lesions. A biological model created with a duo species biofilm (Streptococcus mutans and Lactobacillus acidophilus) was used for the development of a caries-like lesion over the dentin for 7 days. Bovine dentin specimens (4 × 4 × 2 mm) were randomized according to the following caries removal techniques: bur (BUR) or ultrasound (ULT), decontamination (with or without aPDT) and remineralization materials (45S5 or F18 bioactive glasses). The following different groups were investigated: caries lesion (control); sound dentin (control); BUR; BUR + aPDT; ULT; ULT + aPDT; BUR + 45S5, BUR + F18; ULT + 45S5; ULT + F18; BUR + aPDT + 45S5; BUR + aPDT + F18; ULT + aPDT + 45S5; and ULT + aPDT + F18. Transverse microradiography (TMR), cross-sectional microhardness (CSH), FT-Raman spectroscopy and confocal microscopy (CLSM) were performed. A two-way ANOVA and Tukey's test were used (α = 0.05). (3) Results: The TMR revealed a lesion depth of 213.9 ± 49.5 µm and a mineral loss of 4929.3% vol.µm. The CSH increases as a function of depth, regardless of the group (p < 0.05). Removal with BUR (24.40-63.03 KHN) has a greater CSH than ULT (20.01-47.53 KHN; p < 0.05). aPDT did not affect the CSH (p > 0.05). No difference was observed between 45S5 or F18 (p > 0.05), but a change was observed for ULT (p > 0.05). The FT-Raman shows no differences for the phosphate (p > 0.05), but a difference is observed for the carbonate and C-H bonds. The CLSM images show that aPDT effectively inactivates residual bacteria. A combination of ULT, aPDT and bioactive glasses can be a promising minimally invasive treatment.

Effect of Biosilicate® Addition on Physical-Mechanical and Biological Properties of Dental Glass Ionomer Cements.

This study investigated the influence of incorporating Biosilicate® on the physico-mechanical and biological properties of glass ionomer cement (GIC). This bioactive glass ceramic (23.75% Na2O, 23.75% CaO, 48.5% SiO2, and 4% P2O5) was incorporated by weight (5%, 10%, or 15%) into commercially available GICs (Maxxion R and Fuji IX GP). Surface characterization was made by SEM (n = 3), EDS (n = 3), and FTIR (n = 1). The setting and working (S/W time) times (n = 3) and compressive strength (CS) were analyzed (n = 10) according to ISO 9917-1:2007. The ion release (n = 6) was determined and quantified by ICP OES and by UV-Vis for Ca, Na, Al, Si, P, and F. To verify cell cytotoxicity, stem cells from the apical papilla (SCAP) were exposed to eluates (n = 3, at a ratio of 1.8 cm2/mL) and analyzed 24 h post-exposure. Antimicrobial activity against Streptococcus mutans (ATCC 25175, NCTC 10449) was analyzed by direct contact for 2 h (n = 5). The data were submitted for normality and lognormality testing. One-way ANOVA and Tukey's test were applied for the working and setting time, compressive strength, and ion release data. Data from cytotoxicity and antimicrobial activity were submitted for Kruskal-Wallis' testing and Dunn's post hoc test (α = 0.05). Among all experimental groups, only those with 5% (wt) of Biosilicate® showed better surface quality. Only M5% showed a comparable W/S time to the original material (p = 0.7254 and p = 0.5912). CS was maintained for all Maxxion R groups (p > 0.0001) and declined for Fuji IX experimental groups (p < 0.0001). The Na, Si, P, and F ions released were significantly increased for all Maxxion R and Fuji IX groups (p < 0.0001). Cytotoxicity was increased only for Maxxion R with 5% and 10% of Biosilicate®. A higher inhibition of S. mutans growth was observed for Maxxion R with 5% of Biosilicate® (less than 100 CFU/mL), followed by Maxxion R with 10% of Biosilicate® (p = 0.0053) and Maxxion R without the glass ceramic (p = 0.0093). Maxxion R and Fuji IX presented different behaviors regarding Biosilicate® incorporation. The impacts on physico-mechanical and biological properties were different depending on the GIC, but therapeutic ion release was increased for both materials.

Crystal nucleation in a glass during relaxation well below Tg.

Until quite recently, in almost all papers on crystal nucleation in glass-forming substances, it was assumed that nucleation proceeds in a completely relaxed supercooled liquid and, hence, at constant values of the critical parameters determining the nucleation rate for any given set of temperature, pressure, and composition. Here, we analyze the validity of this hypothesis for a model system by studying nucleation in a lithium silicate glass treated for very long times (up to 250 days) in deeply supercooled states, reaching 60 K below the laboratory glass transition temperature, Tg. At all temperatures in the considered range, T < Tg, we observed an enormous difference between the experimental number of nucleated crystals, N(t), and its theoretically expected value computed by assuming the metastable state of the relaxing glass has been reached. Analyzing the origin of this discrepancy, we confirmed that the key parameters determining the nucleation rates change with time as a result of the glass relaxation process. Finally, we demonstrate that, for temperatures below 683 K, this particular glass almost fully crystallizes prior to reaching the ultimate steady-state nucleation regime (e.g., at 663 K, it would take 176 years for the glass to reach 99% crystallization, while 2600 years would be needed for complete relaxation). This comprehensive study proves that structural relaxation strongly affects crystal nucleation in deeply supercooled states at temperatures well below Tg; hence, this phenomenon has to be accounted for in any crystal nucleation model.

Impact of silanization of different bioactive glasses in simplified adhesives on degree of conversion, dentin bonding and collagen remineralization.

OBJECTIVE: To analyze simplified adhesive containing pure or silanized bioglass 45S5 (with calcium) or Sr-45S5 (strontium-substituted) fillers applied on dentin and to evaluate the microtensile bond strength (µTBS), interface nanoleakage, degree of conversion of adhesive, collagen degradation and remineralization. METHODS: Ambar Universal adhesive (FGM) was doped with 10 wt% bioactive glasses to form following groups: Control (no bioglass), 45S5 (conventional bioglass 45S5), Sr-45S5 (Sr-substituted bioglass 45S5), Sil-45S5 (silanized bioglass 45S5) and Sil-Sr-45S5 (silanized bioglass Sr-45S5). Adhesives were applied after dentin acid-etching using phosphoric acid at extracted human molars. Resin-dentin sticks were obtained and tested for µTBS, nanoleakage at 24 h or 6 months. Degree of conversion was measured using micro-Raman spectroscopy. Dentin remineralization was assessed by FTIR after 6-month storage in PBS. Hydroxyproline (HYP) release was surveyed by UV-Vis spectroscopy. Statistical analysis was performed using ANOVA and Tukey's test (p < 0.05). RESULTS: Regarding µTBS, Sr-45S5 and 45S5 presented higher and stable results (p > 0.05). Control (p = 0.018) and Sil-Sr-45S5 (p < 0.001) showed µTBS reduction after 6-month aging. Sil-Sr-45S5 showed higher HYP release than that obtained in the 45S5 group. Sil-45S5 showed mineral deposition and increase in µTBS (p = 0.028) after 6-months. All experimental adhesives exhibited higher degree of conversion compared to Control group, except for 45S5. All adhesives created gap-free interfaces, with very low silver impregnation, except for Sil-Sr-45S5. SIGNIFICANCE: The incorporation of silanized 45S5 bioglass into the universal adhesive was advantageous in terms of dentin remineralization, bonding performance and adhesive polymerization. Conversely, Sil-Sr-45S5 compromised the µTBS, interface nanoleakage and had a negative impact on HYP outcomes.

Effect of bioactive glasses used as dentin desensitizers on the dentin-pulp complex in rats.

Bioactive glasses have been recommended for the occlusion of dentinal tubules in treating cervical dentin hypersensitivity. This study evaluates an in vivo model of dentin exposure, and tests the efficacy of bioglass treatments. Thirty male Wistar rats received gingival recession surgery on the upper left first molar. The treatments were applied over the surface of the exposed dentin every 4 days for 28 days. The groups were as follows: Naive; Gingival recession; Cavity varnish; Biosilicate®; Strontium bioglass; and Potassium bioglass. Changes in the dentin-pulp complex, and the presence of substance P, were evaluated through hematoxylin-eosin and immunohistochemical staining. The groups had similar results. Teeth with exposed dentinal tubules in rats showed a typical pattern in the dentin-pulp complex and immunotracing for substance P. The materials did not cause pulp damage. The effects of gingival recession and open dentinal tubules on pulp tissue require further clarification.

Smart Bone Graft Composite for Cancer Therapy Using Magnetic Hyperthermia.

Magnetic hyperthermia (MHT) is a therapy that uses the heat generated by a magnetic material for cancer treatment. Magnetite nanoparticles are the most used materials in MHT. However, magnetite has a high Curie temperature (Tc~580 °C), and its use may generate local superheating. To overcome this problem, strontium-doped lanthanum manganite could replace magnetite because it shows a Tc near the ideal range (42-45 °C). In this study, we developed a smart composite formed by an F18 bioactive glass matrix with different amounts of Lanthanum-Strontium Manganite (LSM) powder (5, 10, 20, and 30 wt.% LSM). The effect of LSM addition was analyzed in terms of sinterability, magnetic properties, heating ability under a magnetic field, and in vitro bioactivity. The saturation magnetization (Ms) and remanent magnetization (Mr) increased by the LSM content, the confinement of LSM particles within the bioactive glass matrix also caused an increase in Tc. Calorimetry evaluation revealed a temperature increase from 5 °C (composition LSM5) to 15 °C (LSM30). The specific absorption rates were also calculated. Bioactivity measurements demonstrated HCA formation on the surface of all the composites in up to 15 days. The best material reached 40 °C, demonstrating the proof of concept sought in this research. Therefore, these composites have great potential for bone cancer therapy and should be further explored.

Beyond the Average: Spatial and Temporal Fluctuations in Oxide Glass-Forming Systems.

Atomic structure dictates the performance of all materials systems; the characteristic of disordered materials is the significance of spatial and temporal fluctuations on composition-structure-property-performance relationships. Glass has a disordered atomic arrangement, which induces localized distributions in physical properties that are conventionally defined by average values. Quantifying these statistical distributions (including variances, fluctuations, and heterogeneities) is necessary to describe the complexity of glass-forming systems. Only recently have rigorous theories been developed to predict heterogeneities to manipulate and optimize glass properties. This article provides a comprehensive review of experimental, computational, and theoretical approaches to characterize and demonstrate the effects of short-, medium-, and long-range statistical fluctuations on physical properties (e.g., thermodynamic, kinetic, mechanical, and optical) and processes (e.g., relaxation, crystallization, and phase separation), focusing primarily on commercially relevant oxide glasses. Rigorous investigations of fluctuations enable researchers to improve the fundamental understanding of the chemistry and physics governing glass-forming systems and optimize structure-property-performance relationships for next-generation technological applications of glass, including damage-resistant electronic displays, safer pharmaceutical vials to store and transport vaccines, and lower-attenuation fiber optics. We invite the reader to join us in exploring what can be discovered by going beyond the average.

Effect of bioactive glasses containing strontium and potassium on dentin permeability.

Dentin hypersensitivity (DH) is characterized by pain caused by an external stimulus on exposed dentin. Different therapeutic approaches have been proposed to mitigate this problem; however, none of them provide permanent pain relief. In this study, we synthesized and characterized experimental bioactive glasses containing 3.07 mol% SrO or 3.36 mol% K2 O (both equivalent to 5 wt% in the glass), and evaluated their effect on dentin permeability to verify their potential to treat DH. The experimental materials were characterized by field-emission scanning electron microscopy, Fourier transform infrared spectroscopy, micro-Raman spectroscopy, and X-ray diffraction to confirm the respective structures and chemical compositions. The reduction in the hydraulic conductance of dentin was evaluated at the three stages: minimum permeability; maximum permeability (24% ethylenediaminetetraacetic acid [EDTA] treatment); and final dentin permeability after treatment with the bioactive glasses. They all promoted a reduction in dentin permeability, with a significant difference for each sample and posttreatment group. Also, a significant reduction in dentin permeability was observed even after a simulated toothbrushing test, demonstrating effective action of these materials against DH. Besides, incorporating 3.07 mol% SrO was a positive factor. Therefore, strontium's desensitizing and re-mineralizing properties can be further exploited in bioactive glasses to promote a synergistic effect to treat DH.

Direct determination of Lennard-Jones crystal surface free energy by a computational cleavage method.

The surface free energy of solids, γ, plays a crucial role in all physical and chemical processes involving material surfaces. For the first time, we obtained γ directly from molecular dynamics simulations using a crystal cleavage method. The approach was successfully realized in a Lennard-Jones system by inserting two movable external walls, each consisting of a single crystal layer, into a bulk crystal to create flat, defect-free surfaces. The cleavage technique designed allowed us to calculate the surface free energy according to its definition and avoid surface premelting. The temperature dependence of γ was determined for the (100) and (110) crystal planes along the whole sublimation line and its metastable extension, up to T = 1.02 · Tm, where Tm is the melting point. Good agreement with indirect values of γ(T) was found. The proposed computational cleavage method can be applied to other solids of interest, providing valuable insight into the understanding of chemical and physical surface processes, and demonstrates the successful import of the cleavage method, traditionally used in technical preparation and study of crystal surfaces, into a modern atomistic simulation.

Surface properties of a new lithium disilicate glass-ceramic after grinding.

This study aimed to evaluate the effect of grinding on some surface properties of two lithium disilicate-based glass-ceramics, one experimental new product denominated LaMaV Press (UFSCar-Brazil) and another commercial known as IPS e-max Press (Ivoclar), in the context of simulated clinical adjustment. Discs (N = 24, 12 mm in diameter) were separated into four groups: LaMaV Press with no grinding (E), LaMaV Press after grinding (EG), IPS e-max Press with no grinding (C), and IPS e-max Press after grinding (CG). A 0.1-mm deep grinding was carried out on EG and CG samples (final thickness of 1.4 mm) using a diamond stone in a low-speed device. The E and C samples had the same thickness. The effect of grinding on the sample surfaces was evaluated by X-ray diffraction, mechanical and optical profilometry, scanning electron microscopy, goniometry, and Vickers hardness. The mean roughness (Ra) was evaluated by Kruskal-Wallis and Student-Newman-Keuls statistics. The surface energy (SE) by the sessile drop method and Vickers hardness (VH) were analyzed using two-way ANOVA. The Ra medians were E = 1.69 µm, EG = 1.57 µm, C = 1.45 µm, and CG = 1.13 µm with p = 0.0284. The SE and VH were similar for all materials and treatments. Grinding smoothed the surfaces and did not significantly alter the hardness and surface energy of both LaMaV Press and IPS e-max Press. These glass-ceramics presented similar surface properties, and clinical adjustments can be implemented without loss of performance of both materials. A grinding standardization device developed that allowed to control the amount of grinding, the speed of rotation speed and the force exerted on the samples.

Optimizing the microstructure of a new machinable bioactive glass-ceramic.

OBJECTIVES: This study aimed to optimize the crystallization process and the microstructure of a new bioactive glass-ceramic (GC) previously developed by our research group to obtain machinable glass-ceramics. METHODS: Differential scanning calorimetry (DSC) analyses were conducted to explore the characteristic temperatures and construct a semi-quantitative nucleation curve. The GC specimens were characterized by X-ray diffraction (XRD) and Rietveld refinement. Their brittleness index (B) and machinability were characterized and compared with IPS e.max-CAD®. Their Young's modulus, fracture toughness, and hardness were assessed. RESULTS: We found that the maximum crystal nucleation rate temperature of this GC is ~470 °C. Treatments were designed based on the 1st DSC peak onset (570 °C), 1st peak offset (650 °C), and 2nd peak offset (705 °C) crystallization temperatures of lithium metasilicate (LS, LiSi2O3) and lithium disilicate (LS2, Li2Si2O5). Rietveld refinement indicated an increase in LS2 and a reduction in LS and amorphous phase for increased temperatures and longer treatment times. Their B values indicate good machinability compared with that of the control group based on statistical analyses. As expected, lower levels of LS2 increase the machinability regardless of the rotation speed adopted, leading to a greater depth of cut and reduced Edge Chipping Damage Depth (ECDD). CONCLUSION: This bioactive GC with optimized microstructure presents high machinability. For treatment temperatures above 570 °C, the number of elongated LS2 crystals increases and decreases the amorphous phase content, which reduce the machinability of the GC, and should therefore be avoided. The best results were obtained using heat treatment at 570 °C, which produces LS crystals embedded in a glassy matrix (67%) with small contents of secondary phases.

Analysis of permeability and biological properties of dentin treated with experimental bioactive glasses.

OBJECTIVES: To evaluate obliterating capability and biological performance of desensitizing agents. METHODS: 50 dentin blocks were distributed according to the desensitizing agent used (n = 10): Control (Artificial saliva); Ultra EZ (Ultradent); Desensibilize Nano P (FGM); T5-OH Bioactive Glass (Experimental solution); F18 Bioactive Glass (Experimental solution). Desensitizing treatments were performed for 15 days. In addition, specimens were subjected to acid challenge to simulate oral environment demineralizing conditions. Samples were subjected to permeability analysis before and after desensitizing procedures and acid challenge. Cytotoxicity analysis was performed by using Alamar Blue assay and complemented by total protein quantification by Pierce Bicinchoninic Acid assay at 15 min, 24-h and 48-h time points. Scanning electron microscopy and energy dispersion X-ray spectroscopy were performed for qualitative analysis. Data of dentin permeability was analyzed by two-way repeated measures ANOVA and Tukey's test. For cytotoxicity, Kruskal-Wallis and Newman-Keuls tests. RESULTS: for dentin permeability there was no significant difference among desensitizing agents after treatment, but control group presented highest values (0.131 ± 0.076 Lp). After acid challenge, control group maintained highest values (0.044 ± 0.014 Lp) with significant difference to other groups, except for Desensibilize Nano P (0.037 ± 0.019 Lp). For cytotoxicity, there were no significant differences among groups. CONCLUSION: Bioglass-based desensitizers caused similar effects to commercially available products, regarding permeability and dentin biological properties. CLINICAL SIGNIFICANCE: There is no gold standard protocol for dentin sensitivity. The study of novel desensitizing agents that can obliterate dentinal tubules in a faster-acting and long-lasting way may help meet this clinical need.

Development and evaluation of reparative tricalcium silicate-ZrO2 -Biosilicate composites.

Biosilicate is a bioactive glass-ceramic used in medical and dental applications. This study evaluated novel reparative materials composed of pure tricalcium silicate (TCS), 30% zirconium oxide (ZrO2 ) and 10 or 20% biosilicate, in comparison with Biodentine. Setting time was evaluated based on ISO 6876 standard, radiopacity by radiographic analysis, solubility by mass loss, and pH by using a pH meter. Cytotoxicity was evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and NR assays. Alkaline phosphatase (ALP) activity and alizarin red were used to evaluate cell bioactivity. Antimicrobial activity was assessed on Enterococcus faecalis by the direct contact test. The data were submitted to analysis of variance (ANOVA)/Tukey; Bonferroni and Kruskal-Wallis, and Dunn tests (α = 0.05). The association of Biosilicate with TCS + ZrO2 had appropriate setting time, radiopacity, and solubility, alkaline pH, and antimicrobial activity. TCS and Biodentine showed higher ALP activity in 14 days than the control (serum-free medium). All cements produced mineralized nodules. In conclusion, Biosilicate + TCS ZrO2 decreased the setting time and increased the radiopacity in comparison to TCS. Biosilicate + TCS ZrO2 presented lower solubility and higher radiopacity than Biodentine. In addition, these experimental cements promoted antimicrobial activity and mineralization nodules formation, suggesting their potential for clinical use.

Bactericidal activity and biofilm inhibition of F18 bioactive glass against Staphylococcus aureus.

Antimicrobial treatment failure has been increasing at alarming rates. In this context, the bactericidal properties of biocompatible antimicrobial agents have been widely studied. F18 is a recently developed bioactive glass that presents a much wider working range when compared to other bioactive glasses, a feature that allows it to be used for coating metallic implants, sintering scaffolds or manufacturing fibers for wound healing applications. The aim of this study was to investigate the in vitro bactericidal and anti-biofilm activity of F18 glass as a powder and as a coating on steel samples, and to explore the effects of its dissolution products at concentrations from 3 mg/mL to 50 mg/mL against the Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA) biofilms. Furthermore, we intend to verify whether changes in the medium pH could influence the bactericidal activity of F18. The results indicated that F18 presented bactericidal activity in preformed S. aureus and MRSA biofilms, reducing more than 6 logs of the viable cells that remained in contact with 50 mg/mL for 24 h. Moreover, an anti-biofilm activity was observed after 12 h of direct contact, with a drop of more than 6 logs of the viable bacterial population. Neutralization of the F18 solution pH decreased its bactericidal efficacy. These results indicate that the F18 glass could be considered as an alternative material for controlling and treating infections by S. aureus.

Effect of bioactive Biosilicate® /F18 glass scaffolds on osteogenic differentiation of human adipose stem cells.

This study evaluated the gene expression profile of the human adipose-derived stem cells (hASCs) grown on the Biosilicate® /F18 glass (BioS-2P/F18) scaffolds. hASCs were cultured using the osteogenic medium (control), the scaffolds, and their ionic extract. We observed that ALP activity was higher in hASCs grown on the BioS-2P/F18 scaffolds than in hASCs cultured with the ionic extract or the osteogenic medium on day 14. Moreover, the dissolution product group and the control exhibited deposited calcium, which peaked on day 21. Gene expression profiles of cell cultured using the BioS-2P/F18 scaffolds and their extract were evaluated in vitro using the RT2 Profiler polymerase chain reaction (PCR) microarray on day 21. Mineralizing tissue-associated proteins, differentiation factors, and extracellular matrix enzyme expressions were measured using quantitative PCR. The gene expression of different proteins involved in osteoblast differentiation was significantly up-regulated in hASCs grown on the scaffolds, especially BMP1, BMP2, SPP1, BMPR1B, ITGA1, ITGA2, ITGB1, SMAD1, and SMAD2, showing that both the composition and topographic features of the biomaterial could stimulate osteogenesis. This study demonstrated that gene expression of hASCs grown on the scaffold surface showed significantly increased gene expression related to hASCs cultured with the ionic extract or the osteogenic medium, evidencing that the BioS-2P/F18 scaffolds have a substantial effect on cellular behavior of hASCs.

Crystallization of Supercooled Liquids: Self-Consistency Correction of the Steady-State Nucleation Rate.

Crystal nucleation can be described by a set of kinetic equations that appropriately account for both the thermodynamic and kinetic factors governing this process. The mathematical analysis of this set of equations allows one to formulate analytical expressions for the basic characteristics of nucleation, i.e., the steady-state nucleation rate and the steady-state cluster-size distribution. These two quantities depend on the work of formation, Δ G ( n ) = - n Δ µ + γ n 2 / 3 , of crystal clusters of size n and, in particular, on the work of critical cluster formation, Δ G ( n c ) . The first term in the expression for Δ G ( n ) describes changes in the bulk contributions (expressed by the chemical potential difference, Δ µ ) to the Gibbs free energy caused by cluster formation, whereas the second one reflects surface contributions (expressed by the surface tension, σ : γ = Ω d 0 2 σ , Ω = 4 π ( 3 / 4 π ) 2 / 3 , where d 0 is a parameter describing the size of the particles in the liquid undergoing crystallization), n is the number of particles (atoms or molecules) in a crystallite, and n = n c defines the size of the critical crystallite, corresponding to the maximum (in general, a saddle point) of the Gibbs free energy, G. The work of cluster formation is commonly identified with the difference between the Gibbs free energy of a system containing a cluster with n particles and the homogeneous initial state. For the formation of a "cluster" of size n = 1 , no work is required. However, the commonly used relation for Δ G ( n ) given above leads to a finite value for n = 1 . By this reason, for a correct determination of the work of cluster formation, a self-consistency correction should be introduced employing instead of Δ G ( n ) an expression of the form Δ G ˜ ( n ) = Δ G ( n ) - Δ G ( 1 ) . Such self-consistency correction is usually omitted assuming that the inequality Δ G ( n ) ≫ Δ G ( 1 ) holds. In the present paper, we show that: (i) This inequality is frequently not fulfilled in crystal nucleation processes. (ii) The form and the results of the numerical solution of the set of kinetic equations are not affected by self-consistency corrections. However, (iii) the predictions of the analytical relations for the steady-state nucleation rate and the steady-state cluster-size distribution differ considerably in dependence of whether such correction is introduced or not. In particular, neglecting the self-consistency correction overestimates the work of critical cluster formation and leads, consequently, to far too low theoretical values for the steady-state nucleation rates. For the system studied here as a typical example (lithium disilicate, Li 2 O · 2 SiO 2 ), the resulting deviations from the correct values may reach 20 orders of magnitude. Consequently, neglecting self-consistency corrections may result in severe errors in the interpretation of experimental data if, as it is usually done, the analytical relations for the steady-state nucleation rate or the steady-state cluster-size distribution are employed for their determination.