ABSTRACT
The IAEA established in 1994 a co-ordinated research programme (CRP) on "Reference Materials for Microanalytical Nuclear Techniques" as part of its efforts to promote and strengthen the use of nuclear analytical technologies in member states with the specific aim of improving the quality of analysis of nuclear, environmental, and biological materials. The objectives of this initiative were: to identify suitable biological reference materials which could serve the needs for quality control in microanalytical techniques; to evaluate existing CRMs for use in microanalytical investigations; to evaluate appropriate sample pretreatment procedures for materials being used for analysis with microanalytical techniques; to identify analytical techniques which can be used for characterisation of homogeneity determination, and to apply such techniques to the characterization of candidate reference materials for use with microanalytical techniques. The CRP lasted for 4 years and seven laboratories and the Agency's Laboratories in Seibersdorf participated. A number of materials including the candidate reference materials IAEA 338 (lichen) and IAEA 413 (single cell algae, elevated level) were evaluated for the distribution of elements such as Cl, K, Ca, Cr, Mn, Fe, Zn, As, Br, Rb, Cd, Hg, and Pb. The results obtained during this CRP suggest that: each element exhibits its characteristic distribution in a matrix described by the "Ingamels' sampling constant" or the "relative homogeneity factor" of Kurfuerst; both concepts are valid over a large range of sample mass used for analysis (from 0.1 microg to around 100 mg); and materials being characterised quantitatively for element homogeneity could be used for the experimental determination of total uncertainty of other analytical techniques. As far as we are aware this is the first time the concept of quantitative characterisation of homogeneity has been applied to potential reference materials and the first demonstration of the feasibility and usefulness of the concept with particular emphasis on enhancing quality control opportunities for microanalytical techniques.
ABSTRACT
Several sets of reference air filters were prepared as part of an IAEA evaluation of the performance of laboratories involved in air-pollution studies. Each set comprised three polycarbonate membrane filters, two of which were loaded with urban air particulate matter (APM) obtained in Vienna or Prague, and one unloaded filter. The filters were loaded by filtration of a suspension of the APM materials in water. The homogeneity both of bulk APM materials and of the loaded filters was evaluated and found suitable by determining several elements by instrumental neutron-activation analysis (INAA), proton-induced X-ray emission (PIXE), and micro-X-ray energy-dispersive fluorescence analysis (micro-EDXRF). After evaluation of the homogeneity, INAA, PIXE, EDXRF, atomic absorption spectrometry (AAS), inductively coupled plasma optical emission spectrometry (ICP-OES), and ICP mass spectrometry (ICP-MS) were used to characterize the filter materials and establish "target values" and their associated standard deviations for 15 elements. Problems encountered during the preparation of these unique, simulated air filters and the criteria for setting both the target values and standard deviations are presented.
Subject(s)
Air Pollutants/standards , Environmental Monitoring/standards , Filtration/instrumentation , Reference Standards , Air Pollutants/analysis , Chemistry Techniques, Analytical/instrumentation , Chemistry Techniques, Analytical/methods , Chemistry Techniques, Analytical/standards , Environmental Monitoring/instrumentation , Environmental Monitoring/methods , Laboratories/standards , Metals/analysis , Quality ControlABSTRACT
The accurate determination of uranium by Inductively Coupled Plasma Emission Spectrometry (ICP-ES) in calcium phosphate matrix suffers from a severe ionization interference due to the high calcium content of the samples. This leads to a signal depression up to 30%. For reliable determinations an extraction method based on anion exchange resin column chromatography is described which separates uranium for the needs in ICP-ES measurements. The results are comparable with results obtained by other determination methods. In addition, reference materials were measured to verify this extraction procedure.
