Fast Fabrication Nanopores on a PMMA Membrane by a Local High Electric Field Controlled Breakdown.

The sensitivity and accuracy of nanopore sensors are severely hindered by the high noise associated with solid-state nanopores. To mitigate this issue, the deposition of organic polymer materials onto silicon nitride (SiNx) membranes has been effective in obtaining low-noise measurements. Nonetheless, the fabrication of nanopores sub-10 nm on thin polymer membranes remains a significant challenge. This work proposes a method for fabricating nanopores on polymethyl methacrylate (PMMA) membrane by the local high electrical field controlled breakdown, exploring the impact of voltage and current on the breakdown of PMMA membranes and discussing the mechanism underlying the breakdown voltage and current during the formation of nanopores. By improving the electric field application method, transient high electric fields that are one-seven times higher than the breakdown electric field can be utilized to fabricate nanopores. A comparative analysis was performed on the current noise levels of nanopores in PMMA-SiNx composite membranes and SiNx nanopores with a 5 nm diameter. The results demonstrated that the fast fabrication of nanopores on PMMA-SiNx membranes exhibited reduced current noise compared to SiNx nanopores. This finding provides evidence supporting the feasibility of utilizing this technology for efficiently fabricating low-noise nanopores on polymer composite membranes.

Simulating Cerebral Edema and Ischemia After Traumatic Acute Subdural Hematoma Using Triphasic Swelling Biomechanics.

Poor outcome following traumatic acute subdural hematoma (ASDH) is associated with the severity of the primary injury and secondary injury including cerebral edema and ischemia. However, the underlying secondary injury mechanism contributing to elevated intracranial pressure (ICP) and high mortality rate remains unclear. Cerebral edema occurs in response to the exposure of the intracellular fixed charge density (FCD) after cell death, causing ICP to increase. The increased ICP from swollen tissue compresses blood vessels in adjacent tissue, restricting blood flow and leading to ischemic damage. We hypothesize that the mass occupying effect of ASDH exacerbates the ischemic injury, leading to ICP elevation, which is an indicator of high mortality rate in the clinic. Using FEBio (febio.org) and triphasic swelling biomechanics, this study modeled clinically relevant ASDHs and simulated post-traumatic brain swelling and ischemia to predict ICP. Results showed that common convexity ASDH significantly increased ICP by exacerbating ischemic injury, and surgical removal of the convexity ASDH may control ICP by preventing ischemia progression. However, in cases where the primary injury is very severe, surgical intervention alone may not effectively decrease ICP, as the contribution of the hematoma to the elevated ICP is insignificant. In addition, interhemispheric ASDH, located between the cerebral hemispheres, does not significantly exacerbate ischemia, supporting the conservative surgical management generally recommended for interhemispheric ASDH. The joint effect of the mass occupying effect of the blood clot and resulting ischemia contributes to elevated ICP which may increase mortality. Our novel approach may improve the fidelity of predicting patient outcome after motor vehicle crashes and traumatic brain injuries due to other causes.

Region-Dependent Mechanical Properties of Human Brain Tissue Under Large Deformations Using Inverse Finite Element Modeling.

This study aims to facilitate intracranial simulation of traumatic events by determining the mechanical properties of different anatomical structures of the brain. Our experimental indentation paradigm used fresh, post-operative human tissue, which is highly advantageous in determining mechanical properties without being affected by postmortem time. This study employed an inverse finite element approach coupled with experimental indentation data to characterize mechanical properties of the human hippocampus (CA1, CA3, dentate gyrus), cortex white matter, and cortex grey matter. We determined that an uncoupled viscoelastic Ogden constitutive formulation was most appropriate to represent the mechanical behavior of these different regions of brain. Anatomical regions were significantly different in their mechanical properties. The cortex white matter was stiffer than cortex grey matter, and the CA1 and dentate gyrus were both stiffer than cortex grey matter. Although no sex dependency was observed, there were trends indicating that male brain regions were generally stiffer than corresponding female regions. In addition, there were no statistically significant age dependent differences. This study provides a structure-specific description of fresh human brain tissue mechanical properties, which will be an important step toward explicitly modeling the heterogeneity of brain tissue deformation during TBI through finite element modeling.

Nanopore Technology for the Application of Protein Detection.

Protein is an important component of all the cells and tissues of the human body and is the material basis of life. Its content, sequence, and spatial structure have a great impact on proteomics and human biology. It can reflect the important information of normal or pathophysiological processes and promote the development of new diagnoses and treatment methods. However, the current techniques of proteomics for protein analysis are limited by chemical modifications, large sample sizes, or cumbersome operations. Solving this problem requires overcoming huge challenges. Nanopore single molecule detection technology overcomes this shortcoming. As a new sensing technology, it has the advantages of no labeling, high sensitivity, fast detection speed, real-time monitoring, and simple operation. It is widely used in gene sequencing, detection of peptides and proteins, markers and microorganisms, and other biomolecules and metal ions. Therefore, based on the advantages of novel nanopore single-molecule detection technology, its application to protein sequence detection and structure recognition has also been proposed and developed. In this paper, the application of nanopore single-molecule detection technology in protein detection in recent years is reviewed, and its development prospect is investigated.

Coupling effect and control strategies of the maglev dual-stage inertially stabilization system based on frequency-domain analysis.

Maglev dual-stage inertially stabilization (MDIS) system is a newly proposed system which combines a conventional two-axis gimbal assembly and a 5-DOF (degree of freedom) magnetic bearing with vernier tilting capacity to perform dual-stage stabilization for the LOS of the suspended optical instrument. Compared with traditional dual-stage system, maglev dual-stage system exhibits different characteristics due to the negative position stiffness of the magnetic forces, which introduces additional coupling in the dual stage control system. In this paper, the coupling effect on the system performance is addressed based on frequency-domain analysis, including disturbance rejection, fine stage saturation and coarse stage structural resonance suppression. The difference between various control strategies is also discussed, including pile-up(PU), stabilize-follow (SF) and stabilize-compensate (SC). A number of principles for the design of a maglev dual stage system are proposed. A general process is also suggested, which leads to a cost-effective design striking a balance between high performance and complexity. At last, a simulation example is presented to illustrate the arguments in the paper.