Effects of polymer matrix and temperature on pyrolysis of tetrabromobisphenol A: Product profiles and transformation pathways.

Plastics are crucial constituents in electronic waste (e-waste) and part of the issue in e-waste recycling and environmental protection. However, previous studies have mostly focused on plastic recovery or thermal behavior of flame retardants, but not both simultaneously. The present study simulated the process of e-waste thermal treatment to explore tetrabromobisphenol A (TBBPA) pyrolysis at various temperatures using polystyrene (PS), polyvinyl chloride (PVC), and e-waste plastics as polymer matrices. Pyrolysis of TBBPA produced bromophenol, bromoacetophenone, bromobenzaldehyde, and bromobisphenol A. Co-pyrolysis with the polymer matrices increased emission factors by 1 - 2 orders of magnitude. The pyrolytic products of TBBPA, TBBPA+PS, and TBBPA+PVC were mainly low-brominated bisphenol A, while that of TBBPA in e-waste plastics was consistently bromophenol. Increasing temperature drove up the proportions of gaseous and particulate products, but lowered the relative abundances of inner wall adsorbed and residual products in pyrolysis of pure TBBPA. In co-pyrolysis of TBBPA with polymer matrix, the proportions of products in different phases were no longer governed solely by temperature, but also by polymer matrix. Co-pyrolysis of TBBPA with PS generated various bromophenols, while that with PVC produced chlorophenols and chlorobrominated bisphenol A. Transformation pathways, deduced by ab initio calculations, include hydrogenation-debromination, isopropylphenyl bond cleavage, oxidation, and chlorination.

Differences of microplastics and nanoplastics in urban waters: Environmental behaviors, hazards, and removal.

Microplastics (MPs) and nanoplastics (NPs) are ubiquitous in the aquatic environment and have caused widespread concerns globally due to their potential hazards to humans. Especially, NPs have smaller sizes and higher penetrability, and therefore can penetrate the human barrier more easily and may pose potentially higher risks than MPs. Currently, most reviews have overlooked the differences between MPs and NPs and conflated them in the discussions. This review compared the differences in physicochemical properties and environmental behaviors of MPs and NPs. Commonly used techniques for removing MPs and NPs currently employed by wastewater treatment plants and drinking water treatment plants were summarized, and their weaknesses were analyzed. We further comprehensively reviewed the latest technological advances (e.g., emerging coagulants, new filters, novel membrane materials, photocatalysis, Fenton, ozone, and persulfate oxidation) for the separation and degradation of MPs and NPs. Microplastics are more easily removed than NPs through separation processes, while NPs are more easily degraded than MPs through advanced oxidation processes. The operational parameters, efficiency, and potential governing mechanisms of various technologies as well as their advantages and disadvantages were also analyzed in detail. Appropriate technology should be selected based on environmental conditions and plastic size and type. Finally, current challenges and prospects in the detection, toxicity assessment, and removal of MPs and NPs were proposed. This review intends to clarify the differences between MPs and NPs and provide guidance for removing MPs and NPs from urban water systems.

Calcite carbonate sinks low-density plastic debris in open oceans.

The vertical settling of plastic debris in oceans is poorly understood. A large share of low-density microplastics (LDMPs) are largely absent from sea surfaces. The present study employs a model that considers the potential of an overlooked microbially induced calcium carbonate precipitation (MICP) process and new motion equations for irregular LDMPs. Here we show that the motion of LDMPs in the present model, exhibiting a damped oscillation pattern, is quite different from that in biofouling models. Furthermore, LDMPs in the size range of 10-200 µm are most likely to gain sufficient density at the biofouling/MICP stage to independently sink to the ocean floor with relatively small drag coefficients, potentially explaining the selective enrichment of LDMPs in the oceanic sediment. The size and shape exhibit strong non-linear effects on the settling patterns of LDMPs. Overall, the present study highlights the importance of calcite-mediated sinking of LDMPs in open oceans.

Deep Learning Bridged Bioactivity, Structure, and GC-HRMS-Readable Evidence to Decipher Nontarget Toxicants in Sediments.

Identifying causative toxicants in mixtures is critical, but this task is challenging when mixtures contain multiple chemical classes. Effect-based methods are used to complement chemical analyses to identify toxicants, yet conventional bioassays typically rely on an apical and/or single endpoint, providing limited diagnostic potential to guide chemical prioritization. We proposed an event-driven taxonomy framework for mixture risk assessment that relied on high-throughput screening bioassays and toxicant identification integrated by deep learning. In this work, the framework was evaluated using chemical mixtures in sediments eliciting aryl-hydrocarbon receptor activation and oxidative stress response. Mixture prediction using target analysis explained <10% of observed sediment bioactivity. To identify additional contaminants, two deep learning models were developed to predict fingerprints of a pool of bioactive substances (event driver fingerprint, EDFP) and convert these candidates to MS-readable information (event driver ion, EDION) for nontarget analysis. Two libraries with 121 and 118 fingerprints were established, and 247 bioactive compounds were identified at confidence level 2 or 3 in sediment extract using GC-qToF-MS. Among them, 12 toxicants were analytically confirmed using reference standards. Collectively, we present a "bioactivity-signature-toxicant" strategy to deconvolute mixtures and to connect patchy data sets and guide nontarget analysis for diverse chemicals that elicit the same bioactivity.

Per- and polyfluoroalkyl substances (PFAS) exposure in plasma and their blood-brain barrier transmission efficiency-A pilot study.

Per- and polyfluoroalkyl substances (PFAS) have been shown to penetrate the blood-brain barrier (BBB) and accumulate in human brain. The BBB transmission and accumulation efficiency of PFAS, as well as the potential health risks from human co-exposure to legacy and emerging PFAS due to differences in transport efficiency, need to be further elucidated. In the present pilot study, 23 plasma samples from glioma patients were analyzed for 17 PFAS. The concentrations of PFAS in six paired brain tissue and plasma samples were used to calculate the BBB transmission efficiency of PFAS (RPFAS). This RPFAS analysis was conducted with utmost care and consideration amid the limited availability of valuable paired samples. The results indicated that low molecular weight PFAS, including short-chain and emerging PFAS, may have a greater potential for accumulation in brain tissue than long-chain PFAS. As an alternative to perfluorooctane sulfonic acid (PFOS), 6:2 chlorinated polyfluorinated ether sulfonate (6:2 Cl-PFESA) exhibited brain accumulation potential similar to that of PFOS, suggesting it may not be a suitable substitute concerning health risk in brain. The BBB transmission efficiencies of perfluorooctanoic acid, PFOS, and 6:2 Cl-PFESA showed similar trends with age, which may be an important factor influencing the entry of exogenous compounds into the brain. A favorable link between perfluorooctane sulfonamide (FOSA) and the development and/or progression of glioma may be implicated by a strong positive correlation (r2 = 0.94; p < 0.01) between RFOSA and Ki-67 (a molecular marker of glioma). However, a causal relationship between RFOSA and glioma incidence were not established in the present study. The present pilot study conducted the first examination of BBB transmission efficiency of PFAS from plasma to brain tissue and highlighted the importance of reducing and/or controlling exposure to PFAS.

Utility of a modified o-DGT passive sampler for measurement of bisphenol analogues in freshwater and coastal waters.

Bisphenol analogues (BPs) are commonly found in riverine and coastal waters. However, the lack of a reliable and robust passive sampling method has hindered our ability to monitor these compounds in aquatic systems. The study developed a novel organic-diffusive gradients in thin film (o-DGT) sampler based on stainless steel mesh membrane, polyacrylamide diffusive gel, and hydrophilic-lipophilic balance (HLB) binding gel. This innovative design tackled issues of filter membrane sorption in traditional o-DGT devices and potential gel damage in membrane-less o-DGT devices, showing promising application prospects. The mass accumulation of 15 target BPs was linear over 10 days in both freshwater (r2 ≥ 0.92) and seawater (r2 ≥ 0.94), with no saturation observed. The diffusion coefficients (D) through polyacrylamide diffusive gels ranged from 4.04 × 10-6 to 5.77 × 10-6 cm2 s-1 in freshwater and from 1.74 × 10-6 to 4.69 × 10-6 cm2 s-1 in seawater for the target BPs (except for bisphenol PH) at 22 °C. The D values of the target BPs in seawater were lower than those in freshwater due to the high salinity in seawater (35 ‰). The o-DGT samplers demonstrated good integrity in field applications. The total concentrations of the eight detected BPs ranged from 9.2 to 323 ng L-1, which was consistent with the measurements obtained by grab sampling. Among all BPs, bisphenol S, bisphenol F, and bisphenol A were consistently detected at all sites using both sampling methods. The concentrations of some novel BPs in coastal water measured by grab sampling were comparable to those measured in rivers, suggesting the need to strengthen pollution control of BPs in coastal areas. These results indicate that the o-DGT passive sampling method developed in the present study can be effectively used for monitoring BPs in freshwater and coastal environments.

Occurrence, Spatial Distribution, and Bioaccumulation of Dissolved Synthetic Musks in Freshwaters across China.

Commercial chemicals, such as synthetic musks, are of global concern, but data on their occurrence and spatial distribution in aquatic environments of large scale are scarce. Two sampling campaigns were conducted in the present study to measure freely dissolved synthetic musks in freshwaters across China using passive samplers, along with biological coexposure at selected sites. Polycyclic musks (PCMs) dominated synthetic musks, with a detection frequency of 95%. Higher concentrations of PCMs were observed in densely populated Mid, East, and South China compared to less populated regions, indicating the significance of anthropogenic activities for synthetic musks in water. The concentration ratios of galaxolide (HHCB)/tonalide (AHTN) were significantly higher in low-latitude areas than in high-latitude areas from June to September, suggesting that solar radiation played an important role in the degradation of HHCB/AHTN. Significant correlations were found between dissolved concentrations of HHCB and AHTN and their lipid-normalized concentrations in coexposed fish and clam. The estimated hazard quotients for HHCB and AHTN in freshwater fish consumed by humans were less than 0.01 at all sampling sites except the Yangtze River Basin. These results help to understand the environmental fate and ecological risks of synthetic musks on a large geographical scale.

Effects of erythromycin on biofilm formation and resistance mutation of Escherichia coli on pristine and UV-aged polystyrene microplastics.

Microplastics (MPs) and antibiotics co-occur widely in the environment and pose combined risk to microbial communities. The present study investigated the effects of erythromycin on biofilm formation and resistance mutation of a model bacterium, E. coli, on the surface of pristine and UV-aged polystyrene (PS) MPs sized 1-2 mm. The properties of UV-aged PS were significantly altered compared to pristine PS, with notable increases in specific surface area, carbonyl index, hydrophilicity, and hydroxyl radical content. Importantly, the adsorption capacity of UV-aged PS towards erythromycin was approximately 8-fold higher than that of pristine PS. Biofilms colonizing on UV-aged PS had a greater cell count (5.6 × 108 CFU mg-1) and a higher frequency of resistance mutation (1.0 × 10-7) than those on pristine PS (1.4 × 108 CFU mg-1 and 1.4 × 10-8, respectively). Moreover, erythromycin at 0.1 and 1.0 mg L-1 significantly (p < 0.05) promoted the formation and resistance mutation of biofilm on both pristine and UV-aged PS. DNA sequencing results confirmed that the biofilm resistance was attributed to point mutations in rpoB segment of the bacterial genome. qPCR results demonstrated that both UV aging and erythromycin repressed the expression levels of a global regulator rpoS in biofilm bacteria, as well as two DNA mismatch repair genes mutS and uvrD, which was likely to contribute to increased resistance mutation frequency.

Modeled Pathways and Fluxes of PCB Dechlorination by Redox Potentials.

Dechlorination is one of the main processes for the natural degradation of polychlorinated biphenyls (PCBs) in an anaerobic environment. However, PCB dechlorination pathways and products vary with PCB congeners, types of functional dechlorinating bacteria, and environmental conditions. The present study develops a novel model for determining dechlorination pathways and fluxes by tracking redox potential variability, transforming the complex dechlorination process into a stepwise sequence. The redox potential is calculated via the Gibbs free energy of formation, PCB concentrations in reactants and products, and environmental conditions. Thus, the continuous change in the PCB congener composition can be tracked during dechlorination processes. The new model is assessed against four measurements from several published studies on PCB dechlorination. The simulation errors in all four measurements are calculated between 2.67 and 35.1% under minimum (n = 0) and maximum (n = 34) numbers of co-eluters, respectively. The dechlorination fluxes for para-dechlorination pathways dominate PCB dechlorination in all measurements. Furthermore, the model also considers multiple-step dechlorination pathways containing intermediate PCB congeners absent in both the reactants and the products. The present study indicates that redox potential might be an appropriate indicator for predicting PCB dechlorination pathways and fluxes even without prior knowledge of the functional dechlorinating bacteria.

Use of machine learning to identify key factors regulating volatilization of semi-volatile organic chemicals from soil to air.

Volatilization from soil to air is a key process driving the distribution and fate of semi-volatile organic contaminants. However, quantifying this process and the key environmental governing factors remains difficult. To address this issue, the volatilization fluxes of polybrominated diphenyl ethers (PBDEs) and organophosphate esters (OPEs) from soil were determined in 16 batch experiments orthogonally with six variables (chemical property, soil concentration, air velocity, ambient temperature, soil porosity, and soil moisture) and analyzed with machine learning methods. The results showed that gradient-boosting regression tree models satisfactorily predicted the volatilization fluxes of PBDEs (r2 = 0.82 ± 0.07) and OPEs (r2 = 0.62 ± 0.13). Permutation importance analysis showed that partitioning potential of chemicals between soil and air was the most important factor regulating the volatilization of the target compounds from soil. Temperature and soil porosity played a secondary role in controlling the migration of PBDEs and OPEs, respectively, due to higher volatilization enthalpies of PBDEs than those of OPEs and dominant adsorption of OPEs on mineral surface. The effect of soil moisture was negative and positive for the volatilization fluxes of PBDEs and OPEs, respectively. These results suggested different responses in the soil-air diffusive transport of PBDEs and OPEs to high temperature and rainstorm induced by climate change.

Fluorescent Visualization of Chemical Profiles across the Air-Water Interface.

Chemical transfer across the air-water interface is one of the most important geochemical processes of global significance. Quantifying such a process has remained extremely challenging due to the lack of suitable technologies to measure chemical diffusion across the air-water microlayer. Herein, we present a fluorescence optical system capable of visualizing the formation of the air-water microlayer with a spatial resolution of 10 µm and quantifying air-water diffusion fluxes using pyrene as a target chemical. We show for the first time that the air-water microlayer is composed of the surface microlayer in water (∼290 ± 40 µm) and a diffusion layer in air (∼350 ± 40 µm) with 1 µg L-1 of pyrene. The diffusion flux of pyrene across the air-water interface is derived from its high-resolution concentration profile without any pre-emptive assumption, which is 2 orders of magnitude lower than those from the conventional method. This system can be expanded to visualize diffusion dynamics of other fluorescent chemicals across the air-water interface and provides a powerful tool for furthering our understanding of air-water mass transfer of organic chemicals related to their global cycling.

Particle transfer mediates dermal exposure of consumers to plasticizers in eraser and pen accessories.

Dermal exposure to chemicals released from daily consumer products is a rising concern, particularly for children who are susceptible to unintentional hand-to-mouth transfer and related chemical exposure risk. However, chemical transfer induced by tiny particles of intact products has yet to be adequately addressed. The objective of the present study was to determine the potentiality of particles release from intact erasers and pen grips upon dermal contact by measuring the migration rates of the embedded plasticizers (phthalates and its alternatives). The results showed that billions of particles were released from erasers (0.6-1.2 × 109) and pen grips (0.2-1.6 × 108) upon dermal contact at ambient temperature, with sizes mainly smaller than 1 µm. The composition of eraser leachates was identical to that of the corresponding bulk eraser, as confirmed by Fourier-transform infrared spectroscopy and pyrolysis. Migrated hydrophobic plasticizers may be used as indicators of particle release from erasers and pen grips. The potentiality of particle release was negatively correlated with the total plasticizer contents (r = -0.51; p < 0.05) for both erasers and pen grips. These findings indicated that particles directly released from school supplies and accessories could be a non-negligible source of human exposure to plasticizers.

Hydrophobic organic contaminants affiliated with polymer-specific microplastics in urban river tributaries and estuaries.

Exposure to microplastics (MPs) and hydrophobic organic contaminants (HOCs) combined at high concentrations may induce adverse effects to aquatic organisms in laboratory-scale studies. To determine environmentally relevant concentrations of HOCs in MPs, it is essential to understand the occurrence of MP-affiliated HOCs in the aquatic environment. Here we report the occurrences of HOCs affiliated with polymer-specific floating MPs from 12 tributaries and three estuaries in the Pearl River Delta, South China. Target HOCs include nine synthetic musks (SMs), 14 ultraviolet adsorbents (UVAs), 15 polycyclic aromatic hydrocarbons (PAHs), eight polybrominated diphenyl ethers (PBDEs), and 14 polychlorinated biphenyls (PCBs). Average concentrations of MP-affiliated ∑9SM, ∑14UVA, ∑15PAH, ∑8PBDE, and ∑14PCB were 1790, 5550, 1090, 412, and 107 ng g-1, respectively. The average concentrations of HOCs affiliated with MPs of different polymer types were 9790, 7220, 72,500, and 55,800 ng g-1 for polyethylene (PE), polypropylene, polystyrene, and other MPs, respectively. As the concentration of PE was the highest among all MPs at the average concentration of 0.77 mg m-3, the monthly outflow of PE-affiliated HOCs accounted for the largest proportion (46 %) in the outflow of MP-affiliated HOCs (2.8 g) to the coastal ocean via three estuaries. These results suggest that HOCs were highly concentrated in MPs and varied among different chemicals and polymer types. Due to the differences of polymer characteristics and half-life of affiliated chemicals, future toxicology studies concerning exposure to these combined pollutants may need to specify polymer types and their affiliated chemicals.

Passive-Sampler-Derived PCB and OCP Concentrations in the Waters of the World─First Results from the AQUA-GAPS/MONET Network.

Persistent organic pollutants (POPs) are recognized as pollutants of global concern, but so far, information on the trends of legacy POPs in the waters of the world has been missing due to logistical, analytical, and financial reasons. Passive samplers have emerged as an attractive alternative to active water sampling methods as they accumulate POPs, represent time-weighted average concentrations, and can easily be shipped and deployed. As part of the AQUA-GAPS/MONET, passive samplers were deployed at 40 globally distributed sites between 2016 and 2020, for a total of 21 freshwater and 40 marine deployments. Results from silicone passive samplers showed α-hexachlorocyclohexane (HCH) and γ-HCH displaying the greatest concentrations in the northern latitudes/Arctic Ocean, in stark contrast to the more persistent penta (PeCB)- and hexachlorobenzene (HCB), which approached equilibrium across sampling sites. Geospatial patterns of polychlorinated biphenyl (PCB) aqueous concentrations closely matched original estimates of production and use, implying limited global transport. Positive correlations between log-transformed concentrations of Σ7PCB, ΣDDTs, Σendosulfan, and Σchlordane, but not ΣHCH, and the log of population density (p < 0.05) within 5 and 10 km of the sampling sites also supported limited transport from used sites. These results help to understand the extent of global distribution, and eventually time-trends, of organic pollutants in aquatic systems, such as across freshwaters and oceans. Future deployments will aim to establish time-trends at selected sites while adding to the geographical coverage.

Effects of organic carbon/elemental carbon and particle size on inhalation bioaccessibility of particle-bound PAHs.

Bioaccessible fractions of particle-bound hydrophobic organic compounds (HOCs) are critical to evaluating human inhalation exposure risk. However, the key factors for controlling the release of HOCs into the lung fluid are not adequately examined. To address this issue, eight particle size fractions (0.056-18 µm) from different particle emission sources (barbecue and smoking) were collected and incubated with an in vitro method for determining inhalation bioaccessibilities of polycyclic aromatic hydrocarbons (PAHs). The bioaccessible fractions of particle-bound PAHs were 35-65% for smoke-type charcoal, 24-62% for smokeless-type charcoal, and 44-96% for cigarette. The size distributions of bioaccessible fractions of 3-4 ring PAHs were symmetric with the patterns of their masses, characterized as a unimodal distribution with both the trough and peak at 0.56-1.0 µm. Analysis from machine learning showed that chemical hydrophobicity appeared to be the most significant factor affecting inhalation bioaccessibility of PAHs, followed by organic carbon and elemental carbon contents. Particle size seemed to have little effect on the bioaccessibility of PAHs. A compositional analysis of human inhalation exposure risk from total concentration, deposition concentration, and bioaccessible deposition concentration in alveolar region showed a shift in the key particle size from 0.56-1.0 µm to 1.0-1.8 µm and an increasing in the contributions of 2-3 ring PAHs to risk for cigarette due to the high bioaccessible fractions. These results suggested the significance of particle deposition efficiency and bioaccessible fractions of HOCs in risk assessment.

Country-specific riverine contributions to marine plastic pollution.

Marine plastic debris are mainly derived from land-based sources, and the transport of plastics via global rivers is of great concern. Ample efforts have been made in estimating the land-based contributions of plastic to the global oceans, but quantifying country-specific (and per capita) riverine outflows is an important step toward the development of a globally integrated framework to mitigate marine plastic pollution. To estimate the country-specific riverine contributions to global marine plastic pollution, we built a River-to-Ocean model framework. In 2016, the median annual country-specific riverine plastic outflows and related per capita values for 161 countries varied between 0.76 and 103,000 metric tons (MT) and 0.83-248 g, respectively. India, China, and Indonesia were the top three contributors to riverine plastic outflows, whereas Guatemala, Philippines, and Colombia had the highest per capita riverine plastic outflows. The total riverine plastic outflow from 161 countries was in the range of 0.15-0.53 million MT annually, accounting for 0.4 %-1.3 % of the 40 million MT plastic waste generated yearly by more than seven billion humans. Population, plastic waste generation, and Human Development Index are the dominant factors influencing riverine plastic outflows to global oceans from individual countries. Our findings provide an important basis for launching effective plastic pollution management and control measures in global countries.

Joint effects of temperature and copper exposure on developmental and gene-expression responses of the marine copepod Tigriopus japonicus.

There is growing contamination of copper (Cu) in the marine environment, particularly after the ban of organotin compounds and the increase of the use of Cu-based antifouling paints. Although there are increasing research interests in temperature-dependent chemical toxicity to aquatic organisms, most existing studies focused on acute impacts of chemicals at high concentrations. This study aimed to investigate the interacting effect of temperature and copper exposure at environmentally relevant concentrations on survival and development in the marine copepod Tigriopus japonicus with a partial life-cycle toxicity test. Expressions of five stress response genes in the copepod, namely two glutathione S-transferases (GST-S and GST-O), two heat shock proteins (HSP70 and HSP90), and glutathione reductase (GR) were also investigated. The copepod's survival was significantly impaired at 15 °C after development to adult stage, while its developmental time reduced significantly with increasing temperature. Copper at the two environmentally relevant test concentrations had no significant impacts on these apical endpoints whereas the interaction between Cu and temperature was more significant in modulating gene expressions. GST-S, GST-O and HSP90 genes in copepods exposed to 100 µg Cu L-1 were significantly upregulated at 20 °C. At 32 °C, most genes were either insignificantly expressed or down-regulated, compared to the control, likely suggesting that thermal stress inhibited the copepod's antioxidative defense system. Overall, the results revealed that the joint Cu and thermal stresses have significantly elicited antioxidative system in the copepods. It clearly demonstrated the need for more fundamental studies about potential impacts of different environmental factors such as temperature on chemical toxicity under realistic scenario of marine pollution.

Plastic waste discharge to the global ocean constrained by seawater observations.

Marine plastic pollution poses a potential threat to the ecosystem, but the sources and their magnitudes remain largely unclear. Existing bottom-up emission inventories vary among studies for two to three orders of magnitudes (OMs). Here, we adopt a top-down approach that uses observed dataset of sea surface plastic concentrations and an ensemble of ocean transport models to reduce the uncertainty of global plastic discharge. The optimal estimation of plastic emissions in this study varies about 1.5 OMs: 0.70 (0.13-3.8 as a 95% confidence interval) million metric tons yr-1 at the present day. We find that the variability of surface plastic abundance caused by different emission inventories is higher than that caused by model parameters. We suggest that more accurate emission inventories, more data for the abundance in the seawater and other compartments, and more accurate model parameters are required to further reduce the uncertainty of our estimate.

Environmental fate of microplastics in an urban river: Spatial distribution and seasonal variation.

Rivers are recognized as an important pathway for transport of microplastics (MPs) from land to sea, but limited information is available on the spatial distribution and seasonal variation of riverine MPs from upper reaches to estuaries. Such information is critical for source apportionment and development of effective management measures for riverine MPs. To fill the knowledge gap, we investigated the occurrence of MPs in surface water along an urban river in Guangzhou, southern China in wet and dry seasons. The abundances of MPs from 16 sampling sites in the wet and dry seasons varied from 0.123 to 1.84 particles m-3 and from 0.046 to 4.21 particles m-3, respectively. The spatial distribution of MP abundances showed an increasing trend from upstream to midstream and a decreasing trend from midstream to downstream and estuaries. The abundances of MPs peaked at the midstream, which is surrounded by a highly urbanized region with high population density (∼2530 persons per km2). The large surface water runoff during the wet season elevated the MP abundance in riverine water, except for that flowing through the central urban area where the abundance of MPs collected in the dry season was higher than that in the wet season. This was mainly ascribed to the large input from extensive anthropogenic activities and slow water flow rate in urban areas. The estimated monthly riverine MP fluxes from Humen, Hongqili, and Jiaomen were 7.42, 2.38, and 2.3 billion particles, respectively, in the wet season, and 0.86, 0.71, and 0.19 billion particles, respectively, in the dry season. An increase of riverine MP fluxes from Humen, Hongqili, and Jiaomen in the past three years was evident. The results from the present study provide valuable information for source apportionment of riverine MPs and support the initialization of possible MPs controlling measures.