ABSTRACT
A capacitive chemical sensor for fenvalerate is reported. By using ac impedance measurements the sensor has been based on the decrease in capacitance caused by the analyte used as the template in the formulation of an electropolymerized molecularly imprinted polymer as receptor layer. Improvement of the insulating properties of the sensor was investigated in detail. The capacitive sensor was prepared by a deposition of a self-assembled monolayer of 2-mercaptobenzimidazole (2-MBI) before electropolymerization of 2-MBI and subsequent treatment with n-dodecanethiol to eliminate pinholes and defects in the polymerized 2-MBI film. From the calibration curve concentrations of fenvalerate up to 9 microg mL(-1) could be detected with a linear determination range up to 5 microg mL(-1) and a detection limit of 0.36 microg mL(-1). No significant interference was observed from common pyrethroid insecticides.
ABSTRACT
Poly(2-macaptobenzimidazole) (PMBI) films are prepared at the gold electrode surface by electropolymerization using imprinting technology and the target analyte cholesterol is used as the template. A cholesterol-selective sensor based on PMBI film was employed in conjunction with differential pulse voltammetry (DPV) and ferricyanide as mediator. Concentration of cholesterol up to 100 microM could be detected with a linear determination range up to 20 microM and a detection limit of 0.7 microM. The molecular imprinting approach offers a relatively nice selectivity for the sensor toward cholesterol with respect to common coexisting substances. The method is simple and the stability of the electrode prepared is satisfactory. The results of this research show the feasibility of using molecular imprinting methodology for preparing sensing devices for analytes that are electrochemically inactive.