New solutions for combatting implant bacterial infection based on silver nano-dispersed and gallium incorporated phosphate bioactive glass sputtered films: A preliminary study.

Ag/Ga were incorporated into resorbable orthopaedic phosphate bioactive glasses (PBG, containing P, Ca, Mg, Na, and Fe) thin films to demonstrate their potential to limit growth of Staphylococcus aureus and Escherichia coli in post-operative prosthetic implantation. Dual target consecutive co-sputtering was uniquely employed to produce a 46 nm Ag:PBG composite observed by high resolution TEM to consist of uniformly dispersed ~5 nm metallic Ag nano-particles in a glass matrix. Ga3+ was integrated into a phosphate glass preform target which was magnetron sputtered to film thicknesses of ~400 or 1400 nm. All coatings exhibited high surface energy of 75.4-77.3 mN/m, attributed to the presence of hydrolytic P-O-P structural surface bonds. Degradation profiles obtained in deionized water, nutrient broth and cell culture medium showed varying ion release profiles, whereby Ga release was measured in 1400 nm coating by ICP-MS to be ~6, 27, and 4 ppm respectively, fully dissolving by 24 h. Solubility of Ag nanoparticles was only observed in nutrient broth (~9 ppm by 24 h). Quantification of colony forming units after 24 h showed encouraging antibacterial efficacy towards both S. aureus (4-log reduction for Ag:PBG and 6-log reduction for Ga-PBG≈1400 nm) and E. coli (5-log reduction for all physical vapour deposited layers) strains. Human Hs27 fibroblast and mesenchymal stem cell line in vitro tests indicated good cytocompatibility for all sputtered layers, with a marginal cell proliferation inertia in the case of the Ag:PBG composite thin film. The study therefore highlights the (i) significant manufacturing development via the controlled inclusion of metallic nanoparticles into a PBG glass matrix by dual consecutive target co-sputtering and (ii) potential of PBG resorbable thin-film structures to incorporate and release cytocompatible/antibacterial oxides. Both architectures showed prospective bio-functional performance for a future generation of endo-osseous implant-type coatings.

Mixture of Graphene Oxide/Phosphoric Acid/Melamine as Coating for Improved Fire Protective Performance and Enhancement of Surface Electrical Properties on Wood Chipboard.

Looking for multifunctional materials, an assessment of the performances both as fire retardant and generator of electrically conductive surfaces for a three component mixture of graphene oxide, phosphoric acid and melamine applied on wood chipboard was performed. A simple approach was used to investigate the intumescent char formation and quantify the loss mass during vertical burning tests, in which the prepared samples were exposed for a certain time interval to a flame generated by an ethanol lamp in ambient conditions. Moreover, mass loss evolution and structural changes that occur during the burning process were more comprehensive investigated by differential thermal and thermogravimetric (DTA/TGA) techniques. By comparing the performances between the wood chipboard samples without any coverage and those covered with one or multiple component mixture, an increase of protection against the fire action was noticed when the three component mixture was used. Also, an improvement of the electrical properties was observed, after flame exposure of the samples covered with multiple layers (i.e., two and three), when the three component mixture was used. Morphological and structural investigations by microscopy (optical and electronic-SEMEDX), X-ray diffraction (XRD) and spectral (Raman, FTIR) methods are described. An assessment of market potential is also discussed.

Optimized silicon reinforcement of carbon coatings by pulsed laser technique for superior functional biomedical surfaces fabrication.

We report on the fabrication of silicon-reinforced carbon (C:Si) structures by combinatorial pulsed laser deposition to search for the best design for a new generation of multi-functional coated implants. The synthesized films were characterized from the morphological, structural, compositional, mechanical and microbiological points of view. Scanning electron microscopy revealed the presence, on top of the deposited layers, of spheroid particulates with sizes in the micron range. No micro-cracks or delaminations were observed. Energy dispersive x-ray spectroscopy and grazing incidence x-ray diffraction pointed to the existence of a C to Si compositional gradient from one end of the film to the other. Raman investigation revealed a relatively high sp3 hybridization of up to 80% at 40-48 mm apart from the edge with higher C content. Si addition was demonstrated to significantly increase C:Si film bonding to the substrate, with values above the ISO threshold for coatings to be used in high-loading biomedical applications. Surface energy studies pointed to an increase in the hydrophilic character of the deposited structures along with Si content up to 52 mN m-1. In certain cases, the Si-reinforced C coatings elicited an antimicrobial biofilm action. The presence of Si was proven to be benign to HEp-2 cells of human origin, without interfering with their cellular cycle. On this basis, reliable C:Si structures with good adherence to the substrate and high efficiency against microbial biofilms can be developed for implant coatings and other advanced medical devices.

Production of mesons and baryons at high rapidity and high p(T) in proton-proton collisions at square root[s] = 200 GeV.

We present particle spectra for charged hadrons pi(+/-), K(+/-), p, and p[over] from pp collisions at square root[s] = 200 GeV measured for the first time at forward rapidities (2.95 and 3.3). The kinematics of these measurements are skewed in a way that probes the small momentum fraction in one of the protons and large fractions in the other. Large proton to pion ratios are observed at values of transverse momentum that extend up to 4 GeV/c, where protons have momenta up to 35 GeV. Next-to-leading order perturbative QCD calculations describe the production of pions and kaons well at these rapidities, but fail to account for the large proton yields and small p[over]/p ratios.