ABSTRACT
Copper (Cu)-based catalysts show promise for electrocatalytic CO2 reduction (CO2RR) to multi-carbon alcohols, but thermodynamic constraints lead to competitive hydrocarbon (e.g., ethylene) production. Achieving selective ethanol production with high Faradaic efficiency (FE) and current density is still challenging. Here we show a multivalent Cu-based catalyst, Cu-2,3,7,8-tetraaminophenazine-1,4,6,9-tetraone (Cu-TAPT) with Cu2+ and Cu+ atomic ratio of about 1:2 for CO2RR. Cu-TAPT exhibits an ethanol FE of 54.3 ± 3% at an industrial-scale current density of 429 mA cm-2, with the ethanol-to-ethylene ratio reaching 3.14:1. Experimental and theoretical calculations collectively unveil that the catalyst is stable during CO2RR, resulting from suitable coordination of the Cu2+ and Cu+ with the functional groups in TAPT. Additionally, mechanism studies show that the increased ethanol selectivity originates from synergy of multivalent Cu sites, which can promote asymmetric C-C coupling and adjust the adsorption strength of different carbonaceous intermediates, favoring hydroxy-containing C2 intermediate (*HCCHOH) formation and formation of ethanol.
ABSTRACT
Upcycling of CO2 into fuels by virtually unlimited solar energy provides an ultimate solution for addressing the substantial challenges of energy crisis and climate change. In this work, we report an efficient nanostructured Ru/MnOx catalyst composed of well-defined Ru/MnO/Mn3O4 for photo-thermal catalytic CO2 hydrogenation to CH4, which is the result of a combination of external heating and irradiation. Remarkably, under relatively mild conditions of 200 °C, a considerable CH4 production rate of 166.7 mmol g-1 h-1 was achieved with a superior selectivity of 99.5% at CO2 conversion of 66.8%. The correlative spectroscopic and theoretical investigations suggest that the yield of CH4 is enhanced by coordinating photon energy with thermal energy to reduce the activation energy of reaction and promote formation of key intermediate COOH* species over the catalyst. This work opens up a new strategy for CO2 hydrogenation toward CH4.
ABSTRACT
Cu2+ -based materials, a class of promising catalysts for the electrocatalytic carbon dioxide reduction reaction (CO2 RR) to value-added chemicals, usually undergo inevitable and uncontrollable reorganization processes during the reaction, resulting in catalyst deactivation or the new active sites formation and bringing great challenges to exploring their structure-performance relationships. Herein, a facile strategy is reported for constructing Cu2+ and 3, 4-ethylenedioxythiophene (EDOT) coordination to stabilize Cu2+ ions to prepare a novel layered coordination polymer (CuPEDOT). CuPEDOT enables selective reduction of CO2 to CH4 with 62.7% Faradaic efficiency at the current density of 354 mA cm-2 in a flow cell, and the catalyst is stable for at least 15 h. In situ spectroscopic characterization and theoretical calculations reveal that CuPEDOT catalyst can maintain the Cu2+ -EDOT coordination structurally stable in CO2 RR and significantly promote the further hydrogenation of *CO intermediates, favoring the formation of CH4 instead of dimerization to C2 products. The strong coordination between EDOT and Cu2+ prevents the reduction of Cu2+ ions during CO2 RR. The finding of this work provides a new perspective on designing molecularly stable, highly active catalysts for CO2 RR.
ABSTRACT
The construction of metal hetero-interfaces has great potential in the application of electro-catalytic carbon dioxide reduction (ECR). Herein, we report a fast, efficient, and simple electrodeposition strategy for synthesizing three-dimensional (3D) porous Cu/Zn heterostructures using the hydrogen bubble template method. When the deposition was carried out at -1.0 A for 30 s, the obtained 3D porous Cu/Zn heterostructures on carbon paper (CP) demonstrated a nearly 100% CO faradaic efficiency (FE) with a high partial current density of 91.8 mA cm-2 at -2.1 V vs. Ag/Ag+ in the mixed electrolyte of ionic liquids/acetonitrile in an H-type cell. In particular, the partial current density of CO could reach 165.5 mA cm-2 and the FE of CO could remain as high as 94.3% at -2.5 V vs. Ag/Ag+. The current density is much higher than most reported to date in an H-type cell (Table S1). Experimental and density functional theory (DFT) calculations reveal that the outstanding electrocatalytic performance of the electrode can be ascribed to the formation of 3D porous Cu/Zn heterostructures, in which the porous and self-supported architecture facilitates diffusion and the Cu/Zn heterostructures can reduce the energy barrier for ECR to CO.
ABSTRACT
BACKGROUND: Anatomical segmentectomy is a surgical procedure that completely removes a territory (or territories) of the third-order portal venous branches of a Couinaud segment (Wakabayashi et al. in J Hepatobil Pancreat Sci 29(1):82-98, 2022. https://doi.org/10.1002/jhbp.899 ). Laparoscopic segmentectomy of S8 is considered technically challenging because of the Precise dissection of the Glissonean pedicle of S8, and exposure of the middle and right hepatic veins are required (Ome et al. in J Am Coll Surg 230(3):e13-e20, 2020; Wakabayashi et al. in Ann Surg 261(4):619-29, 2015. https://doi.org/10.1097/sla.0000000000001184 ; Monden et al. in J Hepatobil Pancreat Sci 29(1):66-81, 2022. https://doi.org/10.1002/jhbp.898 ). This report describes a new approach, which can reduce unwanted damage to normal tissues and complications. METHODS: A 53-year-old man who has suffered from hepatitis B for 10 years was admitted for the treatment of two nodular tumors located in segment VIII. The surgical procedure began with the percutaneous injection of 5 mL, 0.025 mg/mL of ICG into the S8 portal branch by using an 18G PTCD needle under the guidance of laparoscopic ultrasound (Xu et al. in Surg Endosc 34(10):4683-4691, 2020. https://doi.org/10.1007/s00464-020-07691-5 ; Wang et al. in Ann Surg 274(1):97-106, 2021. https://doi.org/10.1097/sla.0000000000004718 ; Aoki et al. in J Am Coll Surg 230(3):e7-e12, 2020. https://doi.org/10.1016/j.jamcollsurg.2019.11.004 ), followed by liver transection on the cranial side of the liver, which used the ICG fluorescence images for exposing the roots of the middle and right hepatic veins and dissecting and ligating S8 portal pedicle. The excision specimen was sent for histopathological diagnosis. RESULTS: It took 200 min for the operation and 60 min for the total Pringle maneuver. The estimate of blood loss was 110 mL. The final histopathologic results of the two nodules were hepatocellular carcinoma (HCC). The patient was discharged on postoperative Day 6 with no complications. CONCLUSIONS: Laparoscopic anatomical liver resection of S8 has been demonstrated to be feasible. Under the guidance of laparoscopic ultrasonography, ICG positive staining was proven to be optimal for Anatomical segmentectomy.
Subject(s)
Carcinoma, Hepatocellular , Laparoscopy , Liver Neoplasms , Male , Humans , Middle Aged , Carcinoma, Hepatocellular/diagnostic imaging , Carcinoma, Hepatocellular/surgery , Carcinoma, Hepatocellular/pathology , Liver Neoplasms/diagnostic imaging , Liver Neoplasms/surgery , Liver Neoplasms/pathology , Hepatectomy/methods , Laparoscopy/methods , Staining and LabelingABSTRACT
The electrochemical CO2 reduction reaction (CO2RR) using renewable electricity is one of the most promising strategies for reaching the goal of carbon neutrality. Multicarbonous (C2+) products have broad applications, and ethanol is a valuable chemical and fuel. Many Cu-based catalysts have been reported to be efficient for the electrocatalytic CO2RR to C2+ products, but they generally offer limited selectivity and current density toward ethanol. Herein, we proposed a silica-mediated hydrogen-bonded organic framework (HOF)-templated approach to preparing ultrahigh-density Cu single-atom catalysts (SACs) on thin-walled N-doped carbon nanotubes (TWN). The content of Cu in the catalysts prepared by this method could be up to 13.35 wt %. It was found that the catalysts showed outstanding performance for the electrochemical CO2RR to ethanol, and the Faradaic efficiency (FE) of ethanol increased with the increase in Cu-N3 site density. The FE of ethanol over the catalysts with 13.35 wt % Cu could reach â¼81.9% with a partial current density of 35.6 mA cm-2 using an H-type cell, which is the best result for electrochemical CO2RR to ethanol to date. In addition, the catalyst could be stably used for more than 25 h. Experimental and density functional theory (DFT) studies revealed that the adjacent Cu-N3 active sites (one Cu atom coordinates with three N) were the active sites for the reaction, and their high density was crucial for the high FE of ethanol because the adjacent Cu-N3 sites with a short distance could promote the C-C coupling synergistically.
ABSTRACT
Use of multi-metallic catalysts to enhance reactions is an interesting research area, which has attracted much attention. In this work, we carried out the first work to prepare trimetallic electrocatalysts by a one-step co-electrodeposition process. A series of Cu-X-Y (X and Y denote different metals) catalysts were fabricated using this method. It was found that Cu10La1Cs1 (the content ratio of Cu2+, La3+, and Cs+ in the electrolyte is 10 : 1 : 1 in the deposition process), which had an elemental composition of Cu10La0.16Cs0.14 in the catalyst, formed a composite structure on three dimensional (3D) carbon paper (CP), which showed outstanding performance for CO2 electroreduction reaction (CO2RR) to produce ethylene (C2H4). The faradaic efficiency (FE) of C2H4 could reach 56.9% with a current density of 37.4 mA cm-2 in an H-type cell, and the partial current density of C2H4 was among the highest ones up to date, including those over the catalysts consisting of Cu and noble metals. Moreover, the FE of C2+ products (C2H4, ethanol, and propanol) over the Cu10La1Cs1 catalyst in a flow cell reached 70.5% with a high current density of 486 mA cm-2. Experimental and theoretical studies suggested that the doping of La and Cs into Cu could efficiently enhance the reaction efficiency via a combination of different effects, such as defects, change of electronic structure, and enhanced charge transfer rate. This work provides a simple method to prepare multi-metallic catalysts and demonstrates a successful example for highly efficient CO2RR using non-noble metals.
ABSTRACT
Development of a new and green strategy for C(sp3 )-N bond cleavage is very interesting. Herein, photocatalytic cleavage of the C(sp3 )-N bond of trialkylamines was achieved, with concurrent formation of dialkylamines and olefins. It was found that a rationally designed 2D-Bi2 WO6 @1D-LaPO4 heterostructure was very efficient for the reaction due to its high light collection efficiency and unique catalytic properties. The strategy could be used for different trialkylamines, including triethylamine, tri-n-propylamine, and ethyl-di-isopropylamine. The mechanistic investigation indicated that the catalyst with heterostructure was not only favorable for charge carrier separation but also rendered excited electrons with high reduction capacity. This work opens a way for C(sp3 )-N bond cleavage of trialkylamines.
Subject(s)
Alkenes , Alkenes/chemistry , CatalysisABSTRACT
Design of active catalysts for chemical utilization of methane under mild conditions is of great importance, but remains a challenging task. Here, we prepared a Ag/AgCl with SiO2 coating (Ag/AgCl@SiO2) photocatalyst for methane oxidation to carbon monoxide. High carbon monoxide production (2.3 µmol h-1) and high selectivity (73%) were achieved. SiO2 plays a key role in the superior performance by increasing the lifetime of the photogenerated charge carriers. Based on a set of semi in situ infrared spectroscopy, electron paramagnetic resonance, and electronic property characterization studies, it is revealed that CH4 is effectively and selectively oxidized to CO by the in situ formation of singlet 1O2 via the key intermediate of COOH*. Further study showed that the Ag/AgCl@SiO2 catalyst could also drive valuable conversion using real sunlight under ambient conditions. As far we know, this is the first work on the application of SiO2 modified Ag/AgCl in the methane oxidation reaction.
ABSTRACT
Effective hydrodeoxygenation (HDO) of aromatic alcohols is very attractive in both conventional organic synthesis and upgrading of biomass-derived molecules, but the selectivity of this reaction is usually low because of the competitive hydrogenation of the unsaturated aromatic ring and the hydroxyl group. The high activity of noble metal-based catalysts often leads to undesired side reactions (e.g., saturation of the aromatic ring) and excessive hydrogen consumption. Non-noble metal-based catalysts suffer from unsatisfied activity and selectivity and often require harsh reaction conditions. Herein, for the first time, we report chemoselective HDO of various aromatic alcohols with excellent selectivity, using porous carbon-nitrogen hybrid material-supported Co catalysts. The C-OH bonds were selectively cleaved while leaving the aromatic moiety intact, and in most cases the yields of targeted compounds reached above 99% and the catalyst could be readily recycled. Nitrogen doping on the carbon skeleton of the catalyst support (C-N matrix) significantly improved the yield of the targeted product. The presence of large pores and a high surface area also improved the catalyst efficiency. This work opens the way for efficient and selective HDO reactions of aromatic alcohols using non-noble metal catalysts.
ABSTRACT
Id3, an inhibitor of DNA binding protein, plays important roles in the function and homeostasis of effector and memory T cells. Recent evidence has shown that Id3 is also implicated in CD8 T cell exhaustion. However, whether and how Id3 might regulate effector function or exhaustion of CD8 T cells, especially in the tumor setting, is still unknown. Here, we first showed that Id3 expression was impaired in tumor-infiltrating CD8 T cells as liver cancer progressed, especially in PD-1 +Tim-3 + exhausted CD8 T cells. Enforced expression of Id3 in CD8 T cells resulted in repressed development of anti-tumor CTLs exhaustion, which offered better tumor control. And partially depletion of Id3 in CD8 T cells promoted the development of exhausted CD8 T cells. Furthermore, Id3hi CD8 T cells could respond to PD-1 blockade. Collectively, Id3 exerts protective functions in CD8 T cells for liver cancer.
Subject(s)
Liver Neoplasms , Programmed Cell Death 1 Receptor , CD8-Positive T-Lymphocytes/metabolism , Humans , Inhibitor of Differentiation Proteins/genetics , Inhibitor of Differentiation Proteins/metabolism , Liver Neoplasms/metabolism , Neoplasm Proteins/metabolism , Programmed Cell Death 1 Receptor/metabolismABSTRACT
CO2 methanation is an important reaction in CO2 valorization. Because of the high kinetic barriers, the reaction usually needs to proceed at higher temperature (>300 °C). High-efficiency CO2 methanation at low temperature (<200 °C) is an interesting topic, and only several noble metal catalysts were reported to achieve this goal. Currently, design of cheap metal catalysts that can effectively accelerate this reaction at low temperature is still a challenge. In this work, we found that the amorphous Co-Zr0.1-B-O catalyst could catalyze the reaction at above 140 °C. The activity of the catalyst at 180 °C reached 10.7 mmolCO2 gcat -1 h-1, which is comparable to or even higher than that of some noble metal catalysts under similar conditions. The Zr promoter in this work had the highest promoting factor to date among the catalysts for CO2 methanation. As far as we know, this is the first report of an amorphous transition metal catalyst that could effectively accelerate CO2 methanation. The outstanding performance of the catalyst could be ascribed to two aspects. The amorphous nature of the catalyst offered abundant surface defects and intrinsic active sites. On the other hand, the Zr promoter could enlarge the surface area of the catalyst, enrich the Co atoms on the catalyst surface, and tune the valence state of the atoms at the catalyst surface. The reaction mechanism was proposed based on the control experiments.
ABSTRACT
The design of catalysts with high activity, selectivity, and stability is key to the electroreduction of CO2 . Herein, we report the synthesis of 3D hierarchical metal/polymer-carbon paper (M/polymer-CP) electrodes by in situ electrosynthesis. The 3D polymer layer on CP (polymer-CP) was first prepared by in situ electropolymerization, then a 3D metal layer was decorated on the polymer-CP to produce the M/polymer-CP electrode. Electrodes with different metals (e.g. Cu, Pd, Zn, Sn) and various polymers could be prepared by this method. The electrodes could efficiently reduce CO2 to desired products, such as C2 H4 , CO, and HCOOH, depending on the metal used. For example, C2 H4 could be formed with a Faradaic efficiency of 59.4 % and a current density of 30.2â mA cm-2 by using a very stable Cu/PANI-CP electrode in an H-type cell. Control experiments and theoretical calculations showed that the 3D hierarchical structure of the metals and in situ formation of the electrodes are critical for the excellent performance.
ABSTRACT
The dermal papilla is a major component of hair, which signals the follicular epithelial cells to prolong the hair growth process. Human Annexin A2 was preliminarily identified by two-dimensional gel electrophoresis (2-DE), MALDI-TOF-MS and database searching. The aim of the present study was to explore the role of Annexin A2 in the aggregative growth of dermal papillae cells (DPC). Reverse transcription-polymerase chain reaction (RT-PCR) and Western blot were adopted to detect the expression of Annexin A2. And siRNA technique was used to suppress the expression of Annexin A2. Construction of over-expression vector was used to up-regulate the expression of Annexin A2. Cell Counting Kit 8 (CCK-8) and proliferating cell nuclear antigen (PCNA) were taken to detect the proliferation of DPC. The expression of Annexin A2 mRNA was up-regulated in passage 3 DPC compared with passage 10 DPC by RT-PCR. In line with the results at the mRNA level, Western blot analysis revealed that Annexin A2 isoform 2 was up-regulated significantly in passage 3 DPC compared with passage 10 DPC. The Annexin A2 isoform 2 siRNA was synthesized and transfected into passage 3 DPC. RT-PCR data showed the mRNA expression of Annexin A2 isoform 2 was suppressed in passage 3 DPC. Western blot results showed the expression level of Annexin A2 isoform 2 and PCNA were suppressed in passage 3 DPC. CCK-8 results showed that the proliferation of passage 3 DPC was suppressed (P < 0.05). Recombinant plasmid PLJM-Annexin A2 isoform 2-expression vector were constructed and were transfected into passage 10 DPC. RT-PCR data showed the mRNA expression of Annexin A2 isoform 2 was up-regulated in passage 10 DPC. Western blot results showed the expression level of annexin A2 isoform 2 and PCNA were up-regulated in passage 10 DPC. CCK-8 assay showed the proliferation of DPC was stimulated compared with control group (*P < 0.05). Our study proved that Annexin A2 isoform 2 may participate in regulating the proliferation of DPC and may be related to aggregative growth of dermal papilla cells. Therefore, our study suggests that Annexin A2 may be linked to hair follicle growth cycle.
Subject(s)
Annexin A2/metabolism , Cell Proliferation , Dermis/cytology , Amino Acid Sequence , Annexin A2/chemistry , Annexin A2/genetics , Cell Aggregation , Cells, Cultured , Dermis/metabolism , Electrophoresis, Gel, Two-Dimensional , Gene Expression Regulation , Humans , Protein Isoforms/chemistry , Protein Isoforms/genetics , Protein Isoforms/metabolism , Spectrometry, Mass, Matrix-Assisted Laser Desorption-IonizationABSTRACT
Four lanthanide derivatives of Ta-containing POMs [Ln3(H2O)22][P2W15Ta3O62]·nH2O (Ln = La, 1; Ce, 2; Pr, 3; and Nd, 4) were isolated by the self-assembly of Wells-Dawson type Ta/W mixed-addendum POM and lanthanide ions. Compound 1 showed excellent proton conduction performance at high relative humidities (RHs), with conductivity reaching 1.26 × 10-2 S cm-1 at 95 °C under 98% RH.
ABSTRACT
BACKGROUND: Porcine reproductive and respiratory syndrome virus (PRRSV), and particularly its highly pathogenic genotype (HP-PRRSV), have caused massive economic losses to the global swine industry. RESULTS: To rapidly identify HP-PRRSV, we developed a direct real-time reverse transcription polymerase chain reaction method (dRT-PCR) that could detect the virus from serum specimen without the need of RNA purification. Our dRT-PCR assay can be completed in 1.5 h from when a sample is received to obtaining a result. Additionally, the sensitivity of dRT-PCR matched that of conventional reverse transcription PCR (cRT-PCR) that used purified RNA. The lowest detection limit of HP-PRRSV was 6.3 TCID50 using dRT-PCR. We applied dRT-PCR assay to 144 field samples and the results showed strong consistency with those obtained by cRT-PCR. Moreover, the dRT-PCR method was able to tolerate 5-20% (v/v) serum. CONCLUSIONS: Our dRT-PCR assay allows for easier, faster, more cost-effective and higher throughput detection of HP-PRRSV compared with cRT-PCR methods. To the best of our knowledge, this is the first report to describe a real-time RT-PCR assay capable of detecting PRRSV in crude serum samples without the requirement for purifying RNA. We believe our approach has a great potential for application to other RNA viruses.
ABSTRACT
OBJECTIVE: To develop a detection method of the third-stage larvae of Angiostrongylus cantonensis by real-time PCR and high-resolution melt curve analysis. METHODS: A pair of specific primers was designed based on the internal transcribed spacer 1 (ITS1) region of the nuclear ribosomal DNA of A. cantonensis. The third-stage larvae of A. cantonensis were detected by real-time PCR and high-resolution melt curve analysis. The specificity of the method was analyzed by testing DNAs of A. cantonensis, Clonorchis sinensis, and Gnathostoma spinigerum. The genomic DNA were extracted from 1 to 10 third-stage larvae of A. cantonensis, respectively, and used to identify the sensitivity of the method. RESULTS: This method could specifically detect A. cantonensis and the detection limit reached to one larva. No amplification curve and melt curve were found in C. sinensis and G. spinigerum. CONCLUSION: Real-time PCR and high-resolution melt curve analysis show good specificity and sensitivity for detecting the third-stage larvae of A. cantonensis.
Subject(s)
Angiostrongylus cantonensis , Real-Time Polymerase Chain Reaction , Animals , DNA Primers , DNA, Ribosomal , LarvaABSTRACT
Oxytocin (OXT), a nonapeptide hormone of posterior pituitary, reaches the central nervous system from systemic blood circulation with a difficulty because of the blood-brain barrier (BBB). The interest has been expressed in the use of the nasal route for delivery of OXT to the brain directly, exploiting the olfactory pathway. Our previous study has demonstrated that OXT in the central nervous system rather than the blood circulation plays an important role in rat pain modulation. The communication tried to investigate the interaction between the OXT and pain modulation in Chinese patients with headache to understand the OXT effect on human pain modulation. The results showed that (1) intranasal OXT could relieve the human headache in a dose-dependent manner; (2) OXT concentration in both plasma and cerebrospinal fluid (CSF) increased significantly in headache patients in relation with the pain level; and (3) there was a positive relationship between plasma and CSF OXT concentration in headache patients. The data suggested that intranasal OXT, which was delivered to the central nervous system through olfactory region, could treat human headache and OXT might be a potential drug of headache relief by intranasal administration.
Subject(s)
Headache/drug therapy , Oxytocin/therapeutic use , Pain/drug therapy , Administration, Intranasal , Adult , Asian People , Dose-Response Relationship, Drug , Female , Headache/physiopathology , Humans , Male , Middle Aged , Oxytocin/blood , Oxytocin/cerebrospinal fluid , Pain/physiopathology , Pain Measurement/drug effects , Young AdultABSTRACT
Nucleic acid testing (NAT) is valuable for screening blood donors for occult hepatitis B virus (HBV) infection and infection during the window period in countries where HBV is endemic, such as China. An "in-house" NAT (Triplex NAT) was developed for screening for HBV DNA, hepatitis C virus (HCV) RNA, and the human immunodeficiency virus type 1 (HIV-1) RNA. Using the Triplex NAT, a head-to-head comparative clinical evaluation was carried out against the most common commercial NAT used for blood screening in China: the Procleix Tigris System. A total of 33,025 specimens which were negative for Hepatitis B surface antigen, HCV antibody and HIV-1 antibody/antigen from potential blood donors were tested for HBV DNA, HCV RNA, and HIV-1 RNA by both the in-house Triplex assay and the commercially available Procleix Tigris System. Eleven specimens were detected as HBV positive by both NATs. Twelve specimens were detected as HBV positive by the Procleix Ultrio assay and the discriminatory assays, and not the Triplex. Twenty-eight specimens were detected as HBV positive by the Triplex and not the Procleix Ultrio. This study, combined with other data obtained in China, suggest that at least 50% HBV surface antigen negative but DNA-positive blood donations would be undetected using the current commercial NATs because of their insufficient sensitivity and/or Mini-Pool formatting strategies.
Subject(s)
DNA, Viral/isolation & purification , HIV Infections/diagnosis , Hepatitis B/diagnosis , Hepatitis C/diagnosis , Molecular Diagnostic Techniques/methods , RNA, Viral/isolation & purification , Virology/methods , China , DNA, Viral/genetics , HIV Infections/virology , HIV-1/genetics , HIV-1/isolation & purification , Hepacivirus/genetics , Hepacivirus/isolation & purification , Hepatitis B/virology , Hepatitis B virus/genetics , Hepatitis B virus/isolation & purification , Hepatitis C/virology , Humans , RNA, Viral/genetics , Sensitivity and SpecificityABSTRACT
Arginine vasopressin (AVP), a nonapeptide hormone of posterior pituitary, reaches the central nervous system from systemic blood circulation with a difficulty because of the blood-brain barrier (BBB). The interest has been expressed in the use of the nasal route for delivery of AVP to the brain directly, exploiting the olfactory pathway. Our previous study has demonstrated that AVP in the brain rather than the spinal cord and blood circulation plays an important role in rat pain modulation. For understanding the role of AVP on pain modulation in human, the communication tried to investigate the effect of intranasal AVP on human headache. The results showed that (1) AVP concentration in both plasma and cerebrospinal fluid (CSF) increased significantly in headache patients, who related with the headache level; (2) there was a positive relationship between plasma and CSF AVP concentration in headache patients; and (3) intranasal AVP could relieve the human headache in a dose-dependent manner. The data suggested that intranasal AVP, which was delivered to the brain through olfactory region, could treat human headache and AVP might be a potential drug of pain relief by intranasal administration.