Ca2+-controlled Mn(II) removal process in Aurantimonas sp. HBX-1: Microbially-induced carbonate precipitation (MICP) versus Mn(II) oxidation.

The application of manganese-oxidizing bacteria (MnOB) to produce manganese oxides (MnOx) has been widely studied, but often overlooking the concurrent formation of MnCO3. In this study, we found Ca2+ plays a crucial role in controlling Mn(II) removal in the bacterium Aurantimonas sp. HBX-1. Under conditions with 6.8 mM Ca2+ and without adding Ca2+, 100 µM Mn(II) was removed by 96.96 % and 38.28 % within 8 days, respectively. X-ray photoelectron spectroscopy (XPS) showed that adding Ca2+ increased the average oxidation state (AOS) of the solid products from 2.05 to 2.37. X-ray absorption fine structure (XAFS) analysis revealed the product proportions as follows: under Ca2+-supplemented condition, the ratio of MnOx (1 < x ≤ 2) to MnCO3 was 52 % to 28.1 %, while under Ca2+-free condition, the ratio shifted to 4.6 % for MnOx (1 < x ≤ 2) and 55.2 % for MnCO3. Urease activity assay and proteomic analysis confirmed the expression of urease and carbonic anhydrase, leading to the formation of MnCO3. Additionally, animal heme peroxidase (AHP) in strain HBX-1 was found to be responsible for Mn(II) oxidation through superoxide production, with Ca2+ addition promoting its expression level. Given the widespread presence of Ca2+ in wastewater, its potential impact on the biogeochemical Mn(II) cycle driven by bacteria should be reconsidered.

Combined toxicity of pristine or artificially aged tire wear particles and bisphenols to Tigriopus japonicus.

Tire wear particles (TWPs) are considered an important component of microplastic pollution in the marine environment and occur together with a variety of aquatic pollutants, including frequently detected bisphenols. The adverse effects of TWPs or bisphenols on aquatic organisms have been widely reported. However, the combined toxicity of TWPs and bisphenols is still unknown. In this study, the combined toxicity of both pristine (p-) and aged TWPs (a-TWPs) and four bisphenols ((bisphenol A (BPA), bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF)) to Tigriopus japonicus was evaluated. TWPs increased the toxicity of BPA and BPF but decreased the toxicity of BPAF. For BPS, there was synergistic toxic effect in the presence of p-TWPs, but slightly antagonistic effect was observed in the presence of a-TWPs. This adsorption of BPAF by TWPs resulted in a reduction of its toxicity to the copepod. A-TWPs could release more Zn than p-TWPs, and the released Zn contributed to the synergistic effect of TWPs and BPA or BPF. The aggregation formed by TWPs in certain sizes (e.g., 90-110 µm) could cause intestinal damage and lipid peroxidation in T. japonicus. The synergistic effect of p-TWPs and BPS might be due to the aggregation size of the binary mixture. The results of the current study will be important to understand the combined toxic effect of TWPs and bisphenols and the potential toxic mechanisms of the binary mixture.

Voltage recovery from frozen microbial fuel cells in the laboratory and outdoor field reactors.

Extreme temperature variations are a problem that must be faced in the practical application of microbial fuel cells (MFCs), but MFCs are not extensively described for low and even freezing temperatures. This study assessed the effect of low-temperature shock on the power generation performance and microbial community structure of MFCs. Two scales of MFCs, the small (mL-MFC) and the large (L-MFC), were constructed in the laboratory and their performance was evaluated before and after freezing at -18 °C. The experimental results demonstrate that both MFCs were capable of rapidly restoring their voltage to the previous level after thawing. For the mL-MFC (rGO/Ag), the power density recovered from 194.30 ± 10.84 mW/m2 to 195.57 ± 4.02 mW/m2 after thawing. For L-MFC (carbon felt electrodes), the power density increased significantly from the initial 1.79 mW/m2 to 173.90 mW/m2 after thawing, but the performance degradation problem after reactor amplification still needs to be solved. The sediment microbial fuel cell (SMFC) was successfully constructed and operated in a natural outdoor environment to maintain high voltage output after the period of frost. Microbial analysis indicated after the frost period, psychrotolerant microorganisms enriched on the anode, such as Flavobacterium and Psychrobacter, while the relative abundance of anaerobic methanogenic bacterium decreased. Overall, freeze-thaw operations had a non-negative impact on the performance of MFCs and provided some references for their practical applications.

Unveiling behaviors of 8:2 fluorotelomer sulfonic acid (8:2 FTSA) in Arabidopsis thaliana: Bioaccumulation, biotransformation and molecular mechanisms of phytotoxicity.

8:2 fluorotelomer sulfonic acid (8:2 FTSA) has been commonly detected in the environment, but its behaviors in plants are not sufficiently known. Here, the regular and multi-omics analyses were used to comprehensively investigate the bioaccumulation, biotransformation, and toxicity of 8:2 FTSA in Arabidopsis thaliana. Our results demonstrated that 8:2 FTSA was taken up by A. thaliana roots and translocated to leaves, stems, flowers, and seeds. 8:2 FTSA could be successfully biotransformed to several intermediates and stable perfluorocarboxylic acids (PFCAs) catalyzed by plant enzymes. The plant revealed significant growth inhibition and oxidative damage under 8:2 FTSA exposure. Metabolomics analysis showed that 8:2 FTSA affected the porphyrin and secondary metabolisms, resulting in the promotion of plant photosynthesis and antioxidant capacity. Transcriptomic analysis indicated that differentially expressed genes (DEGs) were related to transformation and transport processes. Integrative transcriptomic and metabolomic analysis revealed that DEGs and differentially expressed metabolites (DEMs) in plants were predominantly enriched in the carbohydrate metabolism, amino acid metabolism, and lipid metabolism pathways, resulting in greater energy consumption, generation of more nonenzymatic antioxidants, alteration of the cellular membrane composition, and inhibition of plant development. This study provides the first insights into the molecular mechanisms of 8:2 FTSA stress response in plants.

Isolation, characteristics, and poly(butylene adipate-co-terephthalate) (PBAT) degradation mechanism of a marine bacteria Roseibium aggregatum ZY-1.

Marine microorganisms have been reported to degrade microplastics. However, the degradation mechanisms are still poorly understood. In this study, a bacterium Roseibium aggregatum ZY-1 was isolated from seawater, which can degrade poly(butylene adipate-co-terephthalate) (PBAT). The PBAT-PLA(polylactic acid, PLA) films, before and after degradation, were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectrometer (FTIR), the weight loss rate and water contact angle were measured. The results indicate that ZY-1 colonized on PBAT-PLA film, changed the functional groups and decreased water contact angle of PBAT-PLA film. Moreover, liquid chromatography mass spectrometry (LC-MS) analysis reveales that PBAT was degraded into its oligomers (TB, BTB) and monomers (T, A) during 10 days, and adipic acid (A) could be used as a sole carbon source. The whole genome sequencing analyses illustrate the mechanisms and enzymes such as PETase, carboxylesterases, arylesterase (PpEst) and genes like pobA, pcaBCDFGHIJKT, dcaAEIJK, paaGHJ involved in PBAT degradation. Therefore, the R. aggregatum ZY-1 will be a promising candidate of PBAT degradation.

Can xenobiotics support the growth of Mn(II)-oxidizing bacteria (MnOB)? A case of phenol-utilizing bacteria Pseudomonas sp. AN-1.

Biogenic manganese oxides (BioMnOx) produced by Mn(II)-oxidizing bacteria (MnOB) have garnered considerable attention for their exceptional adsorption and oxidation capabilities. However, previous studies have predominantly focused on the role of BioMnOx, neglecting substantial investigation into MnOB themselves. Meanwhile, whether the xenobiotics could support the growth of MnOB as the sole carbon source remains uncertain. In this study, we isolated a strain termed Pseudomonas sp. AN-1, capable of utilizing phenol as the sole carbon source. The degradation of phenol took precedence over the accumulation of BioMnOx. In the presence of 100 mg L-1 phenol and 100 µM Mn(II), phenol was entirely degraded within 20 h, while Mn(II) was completely oxidized within 30 h. However, at the higher phenol concentration (500 mg L-1), phenol degradation reduced to 32% and Mn(II) oxidation did not appear to occur. TOC determination confirmed the ability of strain AN-1 to mineralize phenol. Based on the genomic and proteomics studies, the Mn(II) oxidation and phenol mineralization mechanism of strain AN-1 was further confirmed. Proteome analysis revealed down-regulation of proteins associated with Mn(II) oxidation, including MnxG and McoA, with increasing phenol concentration. Notably, this study observed for the first time that the expression of Mn(II) oxidation proteins is modulated by the concentration of carbon sources. This work provides new insight into the interaction between xenobiotics and MnOB, thus revealing the complexity of biogeochemical cycles of Mn and C.

GhRCD1 promotes cotton tolerance to cadmium by regulating the GhbHLH12-GhMYB44-GhHMA1 transcriptional cascade.

Heavy metal pollution poses a significant risk to human health and wreaks havoc on agricultural productivity. Phytoremediation, a plant-based, environmentally benign, and cost-effective method, is employed to remove heavy metals from contaminated soil, particularly in agricultural or heavy metal-sensitive lands. However, the phytoremediation capacity of various plant species and germplasm resources display significant genetic diversity, and the mechanisms underlying these differences remain hitherto obscure. Given its potential benefits, genetic improvement of plants is essential for enhancing their uptake of heavy metals, tolerance to harmful levels, as well as overall growth and development in contaminated soil. In this study, we uncover a molecular cascade that regulates cadmium (Cd2+) tolerance in cotton, involving GhRCD1, GhbHLH12, GhMYB44, and GhHMA1. We identified a Cd2+-sensitive cotton T-DNA insertion mutant with disrupted GhRCD1 expression. Genetic knockout of GhRCD1 by CRISPR/Cas9 technology resulted in reduced Cd2+ tolerance in cotton seedlings, while GhRCD1 overexpression enhanced Cd2+ tolerance. Through molecular interaction studies, we demonstrated that, in response to Cd2+ presence, GhRCD1 directly interacts with GhbHLH12. This interaction activates GhMYB44, which subsequently activates a heavy metal transporter, GhHMA1, by directly binding to a G-box cis-element in its promoter. These findings provide critical insights into a novel GhRCD1-GhbHLH12-GhMYB44-GhHMA1 regulatory module responsible for Cd2+ tolerance in cotton. Furthermore, our study paves the way for the development of elite Cd2+-tolerant cultivars by elucidating the molecular mechanisms governing the genetic control of Cd2+ tolerance in cotton.

Surficial engineering of active hydroxyls for ambient formaldehyde oxidation via enhanced Lewis acidity over Zr-doped cryptomelane materials.

Lewis acids of solid catalysts have been featured for a pivotal role in promoting various reactions. Regarding the oxidation protocol to remove formaldehyde, the inherent drawback of the best-studied MnO2 materials in acidic sites has eventually caused deficiency of active hydroxyls to sustain low-temperature activity. Herein, the cryptomelane-type MnO2 was targeted and it was tuned via incorporation of Zr metal, exhibiting great advances in not only the complete HCHO-to-CO2 degradation but also cycling performance. Zr species were existent in doping state in the MnO2 lattice, rendering lower crystallinity and breaking the regular growth of MnO2 crystallites, which thereby tripled surface area and created larger volume of smaller mesopores. Meantime, the local electronic properties of Mn atoms were also changed by Zr doping, i.e., more low-valence Mn species were formed due to the electron transfer from Zr to Mn. The results of infrared studies demonstrate the higher possession of Lewis acid sites on ZrMn, and this high degree of electrophilic agents favored the production of hydroxyl species. Furthermore, the reactivity of surface hydroxyls, as investigated by CO temperature programmed reduction and temperature programmed desorption of adsorbed O2, was obviously improved as well after Zr modification. It is speculated jointly with the characterizations of the post-reaction catalysts that the accelerated production of active hydroxyls helped rapidly convert formaldehyde into key intermediate-formate, which was then degraded into CO2, avoiding the side reaction path with undesired intermediate-hydrocarbonate-over the pristine MnO2, where active sites were blocked and formaldehyde oxidation was inhibited. Additionally, Zr decoration could stabilize Lewis acidity to be more resistant to heat degeneration, and this merit brought about advantageous thermal recyclability for cycled application.

Deciphering the spatial distribution and function profiles of soil bacterial community in Liao River estuarine wetland, Northeast China.

Soil microbes play vital roles in estuarine wetlands. Understanding the soil bacterial community structure and function profiles is essential to reveal the ecological functions of microbes in estuarine wetlands. Herein, soil samples were collected from Liao River estuarine wetland, Northeast China, along the river to the estuarine mouth, and soil bacterial communities were explored. Results showed that soil physiochemical properties, bacterial community structure and functions exhibited distinct variations influenced by geographical location. Bacterial phyla in soils were dominated by Proteobacteria and Bacteroidetes, while Gillisia and Woeseia were the predominant genera. Soil pH, electrical conductivity and nitrogen-related nutrients were the important factors affecting bacterial community structure. Based on PICRUSt prediction, the genes related to metabolism of nitrogen, sulfur and methane showed spatial distribution patterns, and the abundances of most biomarker genes increased as the distance from estuarine mouth extended. These findings could enrich the understanding of soil microbiome in estuarine wetlands.

Effect of bioturbation of the mitten crab on distribution of tire wear particles and their combined effect on sediment ecosystem.

Tire wear particles (TWPs) are a major source of environmental microplastic pollution which gradually settle and accumulate in sediments after entering the aquatic environment, which can affect the behaviors of benthic organisms. Bioturbation of benthic species could affect the fate, impacts and potential risks of TWPs by altering the properties and structure of sediments. Therefore, in this study, the effect of TWPs on the burrowing activity of Chinese mitten crab (Eriocheir sinensis) was investigated. In addition, the effects of crab bioturbation on the distribution of TWPs and their additives were studied. The combined effects of TWPs and crab bioturbation on the microbial communities in the sediments were also explored. The results of this study showed that both TWPs and the leachate significantly inhibited the burrowing activity of crabs. TWPs in the surface layer of sediments were re-distributed by crab bioturbation and enriched mainly in the sediments near the burrow walls. Meanwhile, the heavy metals (i.e., Zn, Ca, Mg, Ba and Al) used as additives during the tire production in the burrow walls significantly increased as the accumulation of TWPs near burrow walls. In this study, TWP exposure decreased the bacterial diversity and abundance, as well as the functional genes related to carbon and nitrogen cycling process, but crab bioturbation increased them in the sediments of burrow walls by constructing a unique habitat. However, after TWPs entering into burrows, they were significantly decreased in the sediments near the burrow walls like the effects of TWPs, suggesting the negative effects of TWPs could play a dominant role in this combined system. Overall, this study is important for evaluating the distribution and effects of TWP pollution in the sediment ecosystem under biological factors such as bioturbation.

DMF mineralization and substrate specificity mechanism of Aminobacter ciceronei DMFA1.

N,N-dimethylformamide (DMF) is widely used in various industries, but its direct release into water poses high risks to human beings. Although a lot of DMF-degrading bacteria has been isolated, limited studies focus on the degradation preference among DMF and its analogues. In this study, an efficient DMF mineralization bacterium designated Aminobacter ciceronei DMFA1 was isolated from marine sediment. When exposed to a 0.2% DMF (∼1900 mg/L), strain DMFA1 exhibited a degradation efficiency of 100% within 4 days. The observed growth using formamide as the sole carbon source implied the possible DMF degradation pathway of strain DMFA1. Meanwhile,the strain DMFA1 possesses a broad-spectrum substrate degradation, which could effectively degraded 0.2% N,N-dimethylacetamide (DMAC) and N-methylformamide (NMF). Genomic analysis further confirmed the supposed pathway through annotating the genes encoding N, N-dimethylformamidase (DMFase), formamidase, and formate dehydrogenase. The existence of sole DMFase indicating its substrate specificity controlled the preference of DMAc of strain DMFA1. By integrating multiple sequence alignment, homology modeling and molecular docking, the preference of the DMFase in strain DMFA1 towards DMAc are related to: 1) Mutations in key active site residues; 2) the absence of small subunit; and 3) no energy barrier for substrates entering the active site.

The cryptic step in the biogeochemical tellurium (Te) cycle: Indirect elementary Te oxidation mediated by manganese-oxidizing bacteria Bacillus sp. FF-1.

Tellurium (Te) is a rare element within the chalcogen group, and its biogeochemical cycle has been studied extensively. Tellurite (Te(IV)) is the most soluble Te species and is highly toxic to organisms. Chemical or biological Te(IV) reduction to elemental tellurium (Te0) is generally considered an effective detoxification route for Te(IV)-containing wastewater. This study unveils a previously unnoticed Te0 oxidation process mediated by the manganese-oxidizing bacterium Bacillus sp. FF-1. This bacterium, which exhibits both Mn(II)-oxidizing and Te(IV)-reducing abilities, can produce manganese oxides (BioMnOx) and Te0 (BioTe0) when exposed to Mn(II) and Te(IV), respectively. When 5 mM Mn(II) was added after incubating 0.1 mM or 1 mM Te(IV) with strain FF-1 for 16 h, BioTe0 was certainly re-oxidized to Te(IV) by BioMnOx. Chemogenic and exogenous biogenic Te0 can also be oxidized by BioMnOx, although at different rates. This study highlights a new transformation process of tellurium species mediated by manganese-oxidizing bacteria, revealing that the environmental fate and ecological risks of Te0 need to be re-evaluated.

Toxic effects of tire wear particles and the leachate on the Chinese mitten crab (Eriocheir sinensis).

Tire wear particles (TWPs) were considered as an important component of microplastic pollution in the aquatic environment. To understand the ecotoxicity of TWPs to crustacean, this study investigated toxic effects of TWPs and the leachate on the mitten crab Eriocheir sinensis and the accumulation of TWPs in the crabs. Although TWPs could be accumulated in various tissues (i.e., liver, gills and gut) of the crabs, exposure to TWPs or the leachate had no lethal effect on the crabs in this study. Lower concentrations of TWPs and the leachate exposure could stimulate the antioxidant defense system of the crabs, while higher concentrations could disrupt the stress defense system. In addition, the energy supply and metabolism of the crabs could also be affected by TWPs or the leachate. The transcriptomic profiles showed that the toxic mechanisms of TWPs and the leachate were not exactly the same. Similar to the results of biochemical analysis, several Gene Ontology (GO) terms and the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways related to oxidative stress and energy metabolism were significantly regulated by both TWPs and the leachate. However, TWPs could affect the expression of genes enriched in immune-related pathways, while the leachate regulated the enrichment of some other signaling pathways including FoxO signaling pathway, insulin signaling pathway, RIG-I-like receptor signaling pathway, NOD-like receptor signaling pathway, PPAR signaling pathway and neuroactive ligand-receptor interaction. Overall, our study could provide basic biological information for assessing the ecological risk of the TWP pollution in the aquatic environment and was useful to understand the potential toxic mechanisms of the TWPs and the leachate to crustaceans.

Formulating the Li sites of Li-CoOx composites for achieving high-efficiency oxidation removal of formaldehyde over the Ag/Li-CoOx catalyst under ambient conditions.

Oxide supported noble metals are extensively investigated for ambient formaldehyde oxidation, and the Ag-CoOx complex is one promising combination in terms of cost and activity. Further, we previously observed that cooperating Ag with Li + greatly boosted formaldehyde degradation on CoOx. Yet, there is still room for improvement in removal efficiency, mineralization capacity and resistance to severe conditions. These objectives could be realized via strategically formulating the Li+ sites of Li-CoOx composite in this sister study. Three samples with Li + ---Co3+-O2- connections (L-CO), spinel Li+ (LCO-S) and layered Li+ (LCO-L) were obtained at low (300 °C), moderate (500 °C) and high (700 °C) temperatures, respectively. The specific Li+ positions and componential interaction were demonstrated by Hyperspectral imaging (HSI), XRD, SEM, TEM, HAADF mapping, UV-vis DRS and XPS. Moreover, the effect of reactive oxygen exposure on catalytic oxidation of formaldehyde (330-350 mg/m3) was disclosed through CO-TPR and O2-TPD. Compared with the LCO-S and LCO-L, L-CO exhibited dominant formaldehyde degradation due to the larger content of surface oxygen. After Ag decoration, the Li+---Co3+-O2- connections uniquely caused a strong binding of Ag species with catalyst host, which boosted the amount of reactive oxygen and finally resulted in an even higher elimination of ∼73% (CO2 yield = âˆ¼21%), 47% higher than that of the L-CO (CO2 yield = âˆ¼6%). But in contrast, the Ag@LCO-S only achieved ∼53% removal (CO2 yield = âˆ¼9%) and Ag modification was powerless in altering the inertness of LCO-L, demonstrating that the chemical environment of alkali metal is crucial to effectively tuning the catalyst activity. The advantage of Ag@L-CO in formaldehyde depollution was further reflected from its much better resistance to moisture and aromatic compound omnipresent in indoor air. For the first time, this study extended the understanding of the alkali-metal-promoted formaldehyde oxidation reaction to an in-depth level.

GhRCD1 regulates cotton somatic embryogenesis by modulating the GhMYC3-GhMYB44-GhLBD18 transcriptional cascade.

Plant somatic embryogenesis (SE) is a multifactorial developmental process where embryos that can develop into whole plants are produced from somatic cells rather than through the fusion of gametes. The molecular regulation of plant SE, which involves the fate transition of somatic cells into embryogenic cells, is intriguing yet remains elusive. We deciphered the molecular mechanisms by which GhRCD1 interacts with GhMYC3 to regulate cell fate transitions during SE in cotton. While silencing of GhMYC3 had no discernible effect on SE, its overexpression accelerated callus formation, and proliferation. We identified two of GhMYC3 downstream SE regulators, GhMYB44 and GhLBD18. GhMYB44 overexpression was unconducive to callus growth but bolstered EC differentiation. However, GhLBD18 can be triggered by GhMYC3 but inhibited by GhMYB44, which positively regulates callus growth. On top of the regulatory cascade, GhRCD1 antagonistically interacts with GhMYC3 to inhibit the transcriptional function of GhMYC3 on GhMYB44 and GhLBD18, whereby a CRISPR-mediated rcd1 mutation expedites cell fate transition, resembling the effects of GhMYC3 overexpression. Furthermore, we showed that reactive oxygen species (ROS) are involved in SE regulation. Our findings elucidated that SE homeostasis is maintained by the tetrapartite module, GhRCD1-GhMYC3-GhMYB44-GhLBD18, which acts to modulate intracellular ROS in a temporal manner.

Degradation of 8:2 fluorotelomer carboxylic acid (8:2 FTCA) by plants and their co-existing microorganisms.

8:2 fluorotelomer carboxylic acid (8:2 FTCA), an important precursor of perfluorocarboxylic acids (PFCAs), is widely detected in environment and biotas. Hydroponic exposures were conducted to investigate the accumulation and metabolism of 8:2 FTCA in wheat (Triticum aestivum L.) and pumpkin (Cucurbita maxima L.). Endophytic and rhizospheric microorganisms co-existing with the plants were isolated to investigate their contributions to degrade 8:2 FTCA. Wheat and pumpkin roots could take up 8:2 FTCA efficiently with the root concentration factor (RCF) as 5.78 and 8.93, respectively. 8:2 FTCA could be biotransformed to 8:2 fluorotelomer unsaturated carboxylic acid (8:2 FTUCA), 7:3 fluorotelomer carboxylic acid (7:3 FTCA), and seven PFCAs with 2-8 carbon chain length in plant roots and shoots. Cytochromes P450 (CYP450) and glutathione-S-transferase (GST) activities in plants were significantly increased, while flavin-dependent monooxygenases (FMOs) activities were not changed, suggesting that CYP 450 and GST were involved in the transformation of 8:2 FTCA in plant tissues. Twelve 8:2 FTCA-degrading endophytic (8 strains) and rhizospheric (4 strains) bacterial strains were isolated from root interior, shoot interior and rhizosphere of plants, respectively. These bacteria were identified as Klebsiella sp. based on the morphology and 16S rDNA sequence, and they could biodegrade 8:2 FTCA to intermediates and stable PFCAs.

Enhanced oxidative ability, recyclability, water tolerance and aromatic resistance of α-MnO2 catalyst for room-temperature formaldehyde oxidation via simple oxalic acid treatment.

To obtain a versatile formaldehyde oxidation material, simultaneously increasing the oxidative ability, recyclability and deactivation repellence (e.g., enduring the interference from moisture and aromatic compound omnipresent in indoor air) is of great significance. Herein, the above properties of α-MnO2 were synchronously updated via one step treatment in oxalic acid (H2C2O4), and an in-depth understanding of the surface properties-performance relationship was provided by systematic characterizations and designed experiments. Compared with the pristine sample, XPS, ESR, O2-TPD, CO-TPR and pyridine-IR reveal that H2C2O4 created substantial Mn3+ species on surface, exposing a higher coverage of oxygen vacancies that actively participated in the dissociative activation of gas-phase O2 into reactive chemically adsorbed oxygen (OC), and the abundant Lewis acid sites further enabled the effective O2 activation process. The large amount of oxygen OC promoted the HCHO-to-CO2 conversion and inhibited the accumulation of formate that required a high temperature of 170 °C to be eliminated, thus conspicuously improving the α-MnO2's thermal recovery. The combined H2O-TPD, H2O-preadsorbed CO-TPR, C6H6-TPD and C6H6-preadsorbed CO-TPR investigations shed light on the H2C2O4-induced water and benzene resistance. The notably weakened water and benzene binding strength with the H2C2O4-modified surface together with the unrestrained oxygen OC accounted for the outstanding anti-deactivation performance.

Development of a High-Coverage Quantitative Metabolome Analysis Method Using Four-Channel Chemical Isotope Labeling LC-MS for Analyzing High-Salt Fermented Food.

Metabolome analysis of high-salt fermented food can be an analytical challenge, as the salts can interfere with the sample processing and analysis. In this work, we describe a four-channel chemical isotope labeling (CIL) LC-MS approach for a comprehensive metabolome analysis of high-salt fermented food. The workflow includes metabolite extraction, chemical labeling of metabolites using dansyl chloride, dansylhydrazine, or p-dimethylaminophenacyl bromide reagents to enhance separation and ionization, LC-UV measurement of the total concentration of dansyl-labeled metabolites in each sample for sample normalization, mixing of 13C- and 12C-reagent-labeled samples, high-resolution LC-MS analysis, and data processing. Metabolome analysis of fermented foods, including fermented red pepper (FRP) sauce, soy sauce, and sufu (a fermented soybean food), showed unprecedented high metabolic coverage. Metabolome comparison of FRP, soy sauce, and sufu, as well as soy sauce and sufu, indicated great diversity of metabolite types and abundances in these foods. In addition, we analyzed two groups of samples of the same type, FRP with 10% (w/w) and 15% (w/w) salt contents, and detected large variations in multiple categories of metabolites belonging to a number of different metabolic pathways. We envisage that this CIL LC-MS approach can be generally used for metabolomic studies of high-salt fermented food. CIL LC-MS allows high-coverage identification and quantification that could not be done using other methods.

Water durability modification of cerium-manganese oxide by tin shell for efficient airborne benzene oxidation.

Single or cooperative incorporation of Ce and Sn elements into α-MnO2 parent were tried to update the catalytic benzene oxidation performance, and the successive modification via Ce doping and Sn deposition was demonstrated to be a promising methodology to offer high mineralization and avoid moisture-aroused inactivation. Ce doping caused lattice distortion, increased Mn3+ content to 2.7 times that of the pristine MnO2 and weakened Mn-O bonds due to electron transfer from Ce3+ to lattice oxygen, thus facilizing oxygen vacancy formation. Further, Sn deposition on CeMn substrate induced strong metal support interaction (SMSI) due to the core-shell like structure of Sn@CeMn, which promoted the construction of active oxygen vacancies to an even larger extent (1.2 and 2.5 times that of the CeMn and pristine MnO2, respectively). The thus-formed larger amount of reactive oxygen species rendered the Sn@CeMn simultaneously with high CO2 yield and low CO production. Also benefited from the SMSI effect, the Sn@CeMn's ability to continuously activate O2 and H2O into reactive oxygen species (e.g.,·OH radicals) was enhanced, which could offset the negativity caused by water vapor, thereby keeping > 95% removal during 5.5 h water switch on/off investigation at 200 °C. Reaction pathways were uncovered with designed experimentations.

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter.

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe3O4/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO2 extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.