ABSTRACT
Full static x-ray computed tomography (CT) technology has enabled higher precision and resolution imaging and has been applied in many applications such as diagnostic medical imaging, industrial inspection and security screening. In this technique, the x-ray source section is mainly composed of a thermionic cathode and electron beam scanning system. However, they have several shortcomings such as limited scanning angle, long response time and large volume. Distributed and programmable cold cathode (i.e. carbon nanotubes, ZnO nanowires (NWs)) field-emission x-ray sources are expected to solve these problems. However, there have been several long-standing challenges to the application of such cold field emitters for x-ray sources, such as the short lifetime and rigorous fabrication process, which have fundamentally prevented their widespread use. Here, we propose and demonstrate a cold field-emission x-ray source based on a graphene oxide (GO)-coated cuprous sulfide nanowire (Cu2S NW/GO) cathode. The proposed Cu2S NW/GO x-ray source provides stable emission (>18 h at a direct voltage of 2600 V) and has a low threshold (4.5 MV m-1 for obtaining a current density of 1 µA cm-2), benefiting from the demonstrated key features such as in situ epitaxy growth of Cu2S NWs on Cu, nanometer-scale sharp protrusions within GO and charge transfer between the Cu2S NWs and GO layer. Our research provides a simple and robust method to obtain a high-performance cold field emitter, leading to great potential for the next generation of x-ray source and CT.
ABSTRACT
Wearable pressure sensors with high sensitivity, broad dynamic response range, and low detection limit are highly desirable to enable the applications in electronic skins and soft robotics. In this work, we report a high-performance wearable pressure sensor based on microstructured polydimethylsiloxane (PDMS)/Ag and rough polyimide/Au interdigital electrodes. By tailoring the touchpoints, the resulting pressure sensors show ultrahigh sensitivity (259.32 kPa-1 in the range of 0-2.5 kPa), broad dynamic response range (0-54 kPa), fast response (â¼200 µs), and low detection limit (0.36 Pa). Furthermore, the effect of different sensor structural configurations, PDMS geometrical feature, and Ag thickness on the performance of the pressure sensors are systematically investigated. Thanks to these merits, the fabricated pressure sensor is capable of real-time monitoring pulse wave and can act as artificial skin for robot hand to detect weak pressure changes, leading to the great application promise in the fields of biomedical, real-time health monitoring, and intelligent robot.
