2,2'-(4-Amino-4H-1,2,4-triazole-3,5-di-yl)diphenol.

The structure of the title compound, C(14)H(12)N(4)O(2), was determined as part of a project on the coordination chemistry of 1,2,4-triazole derivatives. In the crystal structure, one of the two benzene rings is almost coplanar with the five-membered triazole ring (mean deviation = 0.019 Å), whereas the second benzene ring is rotated by 51.973 (2)°. The two N-C-N-N torsion angles [170.365 (2) and -170.942 (3)°] indicate that the amido group is slightly twisted away from the triazole plane. An intra-molecular O-H⋯N hydrogen bond occurs. In the crystal structure, inter-molecular N-H⋯O and O-H⋯N hydrogen bonding is found.

Poly(methyl methacrylate)-graft-oligoamines as low cytotoxic and efficient nonviral gene vectors.

A series of poly(methyl methacrylate)-graft-oligoamines (PMMA-g-oligoamines), including PMMA-g-DETA, PMMA-g-TETA and PMMA-g-TEPA, were synthesized through aminolysis of the PMMA with diethylenetriamine, triethylenetetramine and tetraethylenepentamine. Agarose gel retardation assay indicated that PMMA-g-oligoamines had good binding capability with plasmid DNA, and the binding capability increased with increasing length of oligoamines and content of nitrogen (N%). The results of particle size, zeta potential and morphology observation further showed that the PMMA-g-oligoamines could condense DNA efficiently and the PMMA-g-oligoamine/DNA complexes were uniform nanospheres. The in vitro cell viability indicated that PMMA-g-oligoamines were less toxic than 25 kDa PEI, though the cytotoxicity of PMMA-g-oligoamines increased slightly with increasing length of oligoamines as well as the N% of PMMA-g-oligoamines. The transfection efficiency of PMMA-g-oligoamines/DNA complexes in 293 T and HeLa cells demonstrated that PMMA-g-oligoamines could transfect cells efficiently with increasing the length of oligoamines, especially PMMA-g-TEPA with highest N%, and showed similar transfection capability as 25 kDa PEI. The cellular uptake study showed that the distribution of YOYO-1 labeled DNA in the cytoplasm and nuclei increased gradually with increasing length of oligoamines.

Surface and micelle properties of novel multi-dentate surfactants.

Novel multi-dentate surfactants, based on alkyl amines of varying hydrophobicity were synthesized, and molecular structures were characterized by IR, UV-vis, NMR and FAB-MS. The new surfactants have good water solubility and are highly efficient at reducing aqueous surface tension. Small-angle neutron scattering (SANS) studies were carried out with aqueous solutions in D(2)O to study aggregation. Spherical micelles were shown to form, and these grow with increasing alkyl chain length; their conformation is unusual compared to conventional linear chain surfactants.

Oil-in-water nanoemulsions for pesticide formulations.

A two-step process for formation of nanoemulsions in the system water/poly(oxyethylene) nonionic surfactant/methyl decanoate at 25 degrees C is described. First, all the components were mixed at a certain composition to prepare a microemulsion concentrate, which was rapidly subjected into a large dilution into water to generate an emulsion. Bluish transparent oil-in-water (O/W) nanoemulsions were formed only when the concentrate was located in the bicontinuous microemulsion (BC) or oil-in-water microemulsion (Wm) region. The existence of an optimum oil-to-surfactant ratio (R(os)) in the BC or Wm region indicates that both the phase behavior and the composition of the concentrate are important factors in nanoemulsion formation. To demonstrate potential applications of these systems, they were employed to formulate a water-insoluble pesticide, beta-cypermethrin (beta-CP). The nanoemulsion was compared with a commercial beta-CP microemulsion in terms of the stability of sprayed formulations.

The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions.

Application of a multi-dentate amphiphilic compound to transfer silver nanoparticles into an organic solvent.

A multi-dentate amphiphilic compound, 3,3'-(dodecylazanediyl)-bis-[N-(2-aminoethyl)propanamide] (12C-2NH2) has been synthesized. The molecular structure was characterized by Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectra, nuclear magnetic resonance (NMR) spectra, and fast atom bombardment mass (FAB-MS) spectra. 12C-2NH2 was employed to stabilize silver nanoparticles. Surface properties and stability of silver nanoparticles were controlled by adjusting the 12C-2NH2 to silver (0) molar ratio. 12C-2NH2 was also applied to transfer silver nanoparticles from an aqueous to an organic phase. The transfer efficiency depends on 12C-2NH2 concentration. When 12C-2NH2 to silver (0) molar ratio was 2:1, the highest efficiency of phase transfer to toluene was obtained. These 12C-2NH2 stabilized silver nanoparticles are very stable over a period of four days in toluene.

[Biological properties study and animal experiment of polylactide/polytrimethylene carbonate blends membrane].

Polylactide is a biodegradable and biocompatible biomaterial. Based on the PLA (Polylactide) membrane, we have produced a new PLA/PTMC (Polytrimethylene carbonate) blends membrane. The biological properties of this membrane were studied by cell toxicity experiment, acute toxicity experiment, skin irritant experiment, sensitization test, hemolytic test, micronucleus test and subcutaneous implantation test. The results demonstrated that the blends membrane has no toxicity and it does not cause skin irritation, hypersensitive reaction and hemolysis. The micronucleus ratio of the membrane is 1.3% +/- 1.0%, being less than 3%. The result of medullary micronucleus test was reported negative. The wounds were free from suppuration and necrosis after subcutaneous implantation in all periods. In the experimental application of this member to preventing adhesion after rabbit intestine operation, the membrane demonstrated good effect. In conclusion, PLA/PTMC blends membrane is a material with good biocompatibility.

Microregion detection of ionic liquid microemulsions.

Nonaqueous ionic liquid (IL) microemulsion consisting of IL, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)), surfactant TX-100, and toluene was prepared and the phase behavior of the ternary system was investigated. Electrical conductivity measurement was used for investigating the microregions of the nonaqueous IL microemulsions. On the basis of the percolation theory, the bmimBF(4)-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF(4) (O/IL) microregions of the microemulsions were successfully identified using insulative toluene as the titration phase. However, this method was invalid when conductive bmimBF(4) acted as the titration phase. The microregions obtained by conductivity measurements were further proved by electrochemical cyclic voltammetry experiments. The results indicated that the conductivity method was feasible for identifying microstructures of the nonaqueous IL microemulsions.

Aerobic biodegradation of alkylphenol ethoxylates.

Primary aerobic biodegradation of alkylphenol ethoxylates (APEOs) was studied using a new simple and fast porphyrin method, which did not require the extraction step. Extent of primary biodegradation of a nonylphenol ethoxylates (NP-10) was excess of 92% after 1.5 days, and reached 99% after 2 days, which was similar to the results obtained using modified CTAS (thiocyanate active substances) method. Degradation of benzene ring of NP-10 was studied using UV-absorbance at 277 nm in chloroform. Results showed that only little of benzene ring was degraded.

Effect of temperature on dynamic rheological behavior of discontinuous cubic liquid crystal.

The dynamic rheological properties of discontinuous cubic liquid crystal, formed by nonionic surfactant C(12-14)E(12), were investigated in the discrete and continuous patterns of raising temperature. In the discrete pattern, the discontinuous cubic phase appears in two types of viscoelastic behaviors under the melting points of cubic phase: elastic gel and viscoelastic liquid. When the discontinuous cubic phase begins to melt, it has the weak polymer-like viscoelasticity. Temperature and shear frequency have completely different effects on the ratio of viscous and elastic components of samples in these three states. At low temperature, the samples dominate in elasticity and temperature and shear frequency has hardly any effect on viscoelasticity. At moderate temperature, its ratio of viscous and elastic components increases with increasing temperature and decreasing shear frequency. At the vicinity of the melting point of cubic liquid crystal, the cubic liquid crystal appears to have almost equaled viscous and elastic component; shear has obvious effect on the ratio of viscoelasticity at low frequency. The results from the continuous pattern of raising temperature are consistent with those from the discrete pattern.

Microstructure and rheological properties of liquid crystallines formed in Brij 97/water/IPM system.

The phase diagram of Brij 97/water/IPM systems was determined at 25 degrees C. Rich liquid crystalline phases including Lalpha, H1, and cubic Fd3m phases were identified by means of small angle X-ray scattering (SAXS). Microstructure transitions of liquid crystals with changes in surfactant concentration and oil content are explained qualitatively by the surfactant packing parameter (vL/aSlc). Dynamic rheological results indicate that all three kinds of liquid crystals investigated show high elasticity. The lamellar, Lalpha, phases formed in Brij 97/water with two different oils, oleic acid and geraniol, were also studied in comparison with those of Brij 97/water/IPM systems. The strength of the network of lamellar phases formed in Brij 97/water/oleic acid and Brij 97/water/geraniol systems are appreciably stronger than for Brij 97/water/IPM systems, indicated by the smaller area of surfactant molecules at the interface and the higher moduli (G' and G'').

Preparation and characterization of inclusion complexes of beta-cyclodextrin with ionic liquid.

The solubilities of beta-cyclodextrin (beta-CD), ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), and their mixture in water were determined, and the conductivity of these aqueous solutions was measured. It was demonstrated that beta-CD and bmimPF6 could enhance the solubility of each other, and the solubility curves of each were linear with gradients of about 1. The conductivity decreased remarkably with increasing beta-CD concentration, and a discernible break in the conductivity curve could be observed when beta-CD and bmimPF6 were equimolar in the solution. The solubility and conductivity results indicated that inclusion complexes (ICs) of 1:1 stoichiometry were formed. The inclusion compounds were further characterized by using powder X-ray diffraction (XRD) analysis, 13C CP/MAS (cross-polarization magic-angle spinning) NMR and 1H NMR spectroscopy, and thermogravimetric analysis (TGA). The results showed that the ICs were a fine crystalline powder. The host-guest system exhibited a channel-type structure and each glucose unit of beta-CD was in a similar environment. The decomposition temperature of the ICs was lower than that of bmimPF6 and beta-CD individually.

TX-100/water/1-butyl-3-methylimidazolium hexafluorophosphate microemulsions.

Both ionic liquids and water are typical green solvents. In this work, the phase behavior of the ternary system consisting of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), TX-100, and water was determined at 25.0 degrees C. The water-in-bmimPF6, bicontinuous, and bmimPF6-in-water microregions of the microemulsions were identified by cyclic voltammetry method using potassium ferrocyanide K4Fe(CN)6 as the electroactive probe. Dynamic light scattering (DLS) and the UV-vis method were used to characterize the microemulsions. It was demonstrated that the hydrodynamic diameter (Dh) of the bmimPF6-in-water microemulsions is nearly independent of the water content but increases with increasing bmimPF6 content due to the swelling of the micelles by the ionic liquid. The UV-vis further confirmed the existence of water domains in the water-in-bmimPF6 microemulsions, and the salt potassium ferricyanide K3Fe(CN)6 could be dissolved in the water domains.

Molecular interaction in binary surfactant mixtures containing alkyl polyglycoside.

Surface tensions were measured for several binary mixtures of a multidegree polymerized alkyl polyglycoside, C12G1.46' with different types of surfactants in 0.1 M NaCl at 25 degrees C. Based on regular solution theory, using a dimensional crystal model and a phase separation model, the molecule exchange energy in mixed monolayer formation (epsilon) and mixed micellization (epsilon(m)) were determined. Surfactants used in the mixtures with C12G1.46 in this study are C12E3S (trioxyethylenated dodecyl sulfonate), C12TAC (dodecyl trimethylammonium chloride), BE-6 (hexaoxyethylenated trisiloxane surfactant), and TMN-6 (hexaoxyethylenated-2,6,8-trimethylnonanol). The mixtures show exchange energy in mixed monolayer formation (epsilon) and mixed micellization (epsilon(m)) ranging from -660 to -1410 J/mol, indicating a decrease in surface energy upon mixing. The decreases in surface energy are in the order C12G1.46/C12E3S > C12G1.46/C12TAC, C12G1.46/C12TAC > C12G2/C12TAC and C12G1.46/BE-6 > C12G1.46/TMN-6. The ability of the mixed monolayer formation relative to the mixed micelle formation of the same binary mixture, measured by the (epsilon-epsilon(m)) values, is in the order C12G1.46/BE-6 > C12G1.46/TMN-6 > C12G1.46/C12E3S-->0 > C12G1.46/C12TAC.

Hexagonal liquid crystalline phases formed in ternary systems of Brij 97-water-ionic liquids.

Phase diagrams of two ionic liquids: hydrophobic 1-butyl-3-methylimidazolium hexafluorophosphate (bmim-PF(6)) and relatively hydrophilic 1-butyl-3-methylimidazolium tetrafluoroborate (bmim-BF(4)) in aqueous solutions of Brij 97 were determined at 25 degrees C. Two hexagonal liquid crystalline phases formed in bmim-PF(6)- and bmim-BF(4)-containing ternary systems were investigated by means of small-angle X-ray scattering (SAXS) and rheological techniques, with comparison of composition and temperature effects. From analysis of the SAXS data, bmim-PF(6) is dominantly penetrated between the oxyethylene chains of surfactant molecules, whereas bmim-BF(4) is mainly located in the water layer of hexagonal phases. The strength of the network of hexagonal phase formed in the Brij 97/water/bmim-BF(4) system is appreciably stronger than that of the Brij 97/water/bmim-PF(6) system, indicated by the smaller area of the surfactant molecule at the interface and the higher moduli (G', G' '). Temperature has a converse effect on the lattice parameters of the two hexagonal phases.

The effect of additives on the water solubilization capacity and conductivity in n-pentanol microemulsions.

The influence of additives such as sodium salicylate and sodium chloride on the water solubilization capacity of AOT in n-pentanol solutions has been investigated. The water solubilization capacity is enhanced by sodium salicylate and decreased by sodium chloride. The percolation behavior of the water/AOT/n-pentanol system is studied by modifying the water concentration and temperature. No percolation threshold induced by water or temperature is detected either in the absence or in the presence of additives. The values of ln sigma have a linear correlation with temperature in the range of 5-40 degrees C. The activation energy is also estimated and discussed.