ABSTRACT
The design of freeform phase diffractive optical elements is a challenging task, typically necessitating the use of complex differential equations or a large number of iterative calculations. This paper proposes what we believe to be a novel approach to address this problem. In this strategy, we introduce overall comparison optimization (OCO) to ensure the fast convergence of the cost function. The quadratic assignment problem (QAP) is used as the mathematical framework for designing freeform phase diffraction optics. Specifically, the ray mapping calculation problem in geometric optics is simplified as a QAP. To solve this problem, we apply the OCO method, which ensures that the cost function rapidly progresses in the "non-negative" direction, thereby facilitating fast convergence in each optimization iteration. In this manner, the proposed approach alleviates the computational burden associated with repeated evaluations of the cost function and accelerates convergence in the design process. We construct holographic masks using the OCO method and perform simulations to demonstrate the potential of the proposed method in swiftly realizing complex illumination patterns. The results show that the design model has good performance when dealing with complex illumination tasks. The conclusions obtained in this paper can be extended to the realization of phase-only holography and the solution of freeform surfaces illumination design.
ABSTRACT
A collimating lens for a light-emitting-diode (LED) light source is an essential device widely used in lighting engineering. Lens surfaces are calculated by geometrical optics and nonimaging optics. This design progress does not rely on any software optimization and any complex iterative process. This method can be used for any type of light source not only Lambertian. The theoretical model is based on point source. But the practical LED source has a certain size. So in the simulation, an LED chip whose size is 1 mm*1 mm is used to verify the feasibility of the model. The mean results show that the lenses have a very compact structure and good collimating performance. Efficiency is defined as the ratio of the flux in the illuminated plane to the flux from LED source without considering the lens material transmission. Just investigating the loss in the designed lens surfaces, the two types of lenses have high efficiencies of more than 90% and 99%, respectively. Most lighting area (possessing 80% flux) radii are no more than 5 m when the illuminated plane is 200 m away from the light source.
