ABSTRACT
Replacing cement with industrial by-products is an important way to achieve carbon neutrality in the cement industry. The purpose of this study is to evaluate the effect of eggshell powder on cement hydration properties, and to evaluate its feasibility as a substitute for cement. The substitution rates of eggshell powder are 0%, 7.5%, and 15%. Studying the heat of hydration and macroscopic properties can yield the following results. First: The cumulative heat of hydration based on each gram of cementitious material falls as the eggshell powder content rises. This is a result of the eggshell powder's diluting action. However, the cumulative heat of hydration per gram of cement rises due to the nucleation effect of the eggshell powder. Second: The compressive strengths of ES0, ES7.5, and ES15 samples at 28 days of age are 54.8, 43.4, and 35.5 MPa, respectively. Eggshell powder has a greater negative impact on the compressive strength. The effect of eggshell powder on the speed and intensity of ultrasonic waves has a similar trend. Third: As the eggshell powder content increases, the resistivity gradually decreases. In addition, we also characterize the microscopic properties of the slurry with added eggshell powder. X-ray Diffraction (XRD) shows that, as the age increases from 1 day to 28 days, hemicaboaluminate transforms into monocaboaluminate. As the content of the eggshell powder increases, FTIR analysis finds a slight decrease in the content of CSH. Similarly, thermogravimetric (TG) results also show a decrease in the production of calcium hydroxide. Although the additional nucleation effect of eggshell powder promotes cement hydration and generates more portlandite, it cannot offset the loss of portlandite caused by the decrease in cement. Last: A numerical hydration model is presented for cement-eggshell powder binary blends. The parameters of the hydration model are determined based on hydration heat normalized by cement mass. Moreover, the hydration heat until 28 days is calculated using the proposed model. The strength development of all specimens and all test ages can be expressed as an exponential function of hydration heat.
ABSTRACT
The cement industry plays a significant role in global carbon emissions, accounting for approximately 8% of global anthropogenic carbon dioxide (CO2) emissions [...].
ABSTRACT
There is a lack of scientific understanding of adding an oyster shell powder (OSP) to geopolymer concrete. The purpose of this study is: (1) to evaluate the high-temperature resistance of the alkali-activated slag ceramic powder (CP) mixture added with OSP at different temperatures, (2) to address the lack of application of environmentally friendly building materials, and (3) to reduce solid waste of OSP pollution and protect the environment. OSP replaces granulated blast furnace slag (GBFS) and CP at 10% and 20% (based on binder), respectively. The mixture was heated to 400.0, 600.0, and 800.0 °C after curing for 180 days. The results of the experiment are summarized as follows: (1) The thermogravimetric (TG) results indicated that the OSP20 samples produced more CASH gels than the control OSP0. (2) As the temperature increased, the compressive strength and ultrasonic pulse velocity (UPV) both decreased. (3) Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results reveal that the mixture undergoes a phase transition at 800.0 °C, and compared with the control OSP0, OSP20 undergoes a different phase transition. (4) The size change and appearance image results indicate that the mixture with added OSP inhibits shrinkage, and calcium carbonate decomposes to produce off-white CaO. To sum up, adding OSP can effectively reduce the damage of high temperatures (800.0 °C) on the properties of alkali-activated binders.
ABSTRACT
This paper presents the effects of alkali-activated blast furnace slag and fly ash (AASF) paste added with waste ceramic powder (WCP) on mechanical properties, weight loss, mesoscopic cracks, reaction products, and microstructure when exposed to 300, 600, and 900 °C. Using waste ceramic powder to replace blast furnace slag and fly ash, the replacement rate was 0-20%. The samples cured at 45 °C for 28 days were heated to 300, 600, and 900 °C to determine the residual compressive strength and weight loss at the relevant temperature. We evaluated the deterioration of the paste at each temperature through mesoscopic images, ultrasonic pulse velocity (UPV), thermogravimetric analysis (TG), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and with a scanning electron microscope (SEM). Relevant experimental results show that: (1) with the increase in waste ceramic powder content, the compressive strength of samples at various temperatures increased, and at 300 °C, the compressive strength of all the samples reached the highest value; (2) the residual weight increased with the increase in the content of the waste ceramic powder; (3) with a further increase in temperature, all the samples produced more mesoscopic cracks; (4) at each temperature, with the rise in waste ceramic powder content, the value of the ultrasonic pulse velocity increased; (5) the TG results showed that, as the content of waste ceramic powder increased, the formation of C-A-S-H gel and hydrotalcite decreased; (6) XRD and FTIR spectra showed that, at 900 °C, the use of waste ceramic powder reduced the formation of harmful crystalline phases; (7) the SEM image showed that, at 900 °C, as the content of waste ceramic powder increased, the compactness of the sample was improved. In summary, the addition of waste ceramic powder can improve the mechanical properties of the alkali-activated paste at high temperatures, reduce the occurrence of cracks, and make the microstructure denser.
ABSTRACT
Every year, ceramic tile factories and the iron smelting industry produce huge amounts of waste ceramic tiles and blast furnace slag (BFS), respectively. In the field of construction materials, this waste can be used as a raw material for binders, thus reducing landfill waste and mitigating environmental pollution. The purpose of this study was to mix waste ceramic powder (WCP) into BFS paste and mortar activated by sodium silicate and sodium hydroxide to study its effect on performance. BFS was partially replaced by WCP at the rate of 10-30% by weight. Some experimental studies were conducted on, for example, the fluidity, heat of hydration, compressive strength testing, ultrasonic pulse velocity (UPV), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), electrical resistivity, sulfuric acid attack, and chloride ion diffusion coefficient. Based on the results of these experiments, the conclusions are: (1) increasing the amount of waste ceramic powder in the mixture can improve the fluidity of the alkali-activated paste; (2) adding waste ceramic powder to the alkali-activated mortar can improve the resistance of the mortar to sulfuric acid; (3) adding waste ceramic powder to the alkali-activated mortar can increase the diffusion coefficient of chloride ions; (4) the early strength of alkali-activated mortar is affected by the Ca/Si ratio, while the later strength is affected by the change in the Si/Al ratio.
ABSTRACT
OBJECTIVE: To observe the effect of moxibustion on oxidative stress injury of nigrostriatal system in rats with Parkinson's disease (PD) based on nuclear factor erythroid 2-related factor (Nrf2)/antioxidant response element (ARE) pathway, and to explore its mechanism. METHODS: A total of 48 SD rats were randomized into a blank group, a sham-operation group, a model group and a moxibustion group, 12 rats in each group. Unilateral two-point injection with 6-hydroxydopamine (6-OHDA) was adopted in the model group and the moxibustion group to establish the PD model; the operation manipulation in the sham-operation group was the same as the model group and the moxibustion group, and the same volume of 0.9% sodium chloride solutions was given by unilateral two-point injection. Moxibustion was adopted at "Baihui" (GV 20) and "Sishencong" (EX-HN 1) in the moxibustion group for 20 min, once a day, 6 times a week for 6 weeks. No intervention was given in the other 3 groups. Morphology of right mesencephalon substantia nigra was observed by HE staining, the expression of tyrosine hydroxylase (TH) in right mesencephalon substantia nigra was detected by immunohistochemistry method, the expression of reactive oxygen species (ROS), malondialdehyde (MDA), glutathione (GSH), and glutathione peroxidase (GSH-Px) in corpus striatum was detected by colorimetry method, and the expression of Nrf2 and heme oxygenase-1 (HO-1) proteins was detected by Western blot in the 4 groups. RESULTS: Clear tissue structure and complete dopaminergic neurons of right mesencephalon substantia nigra were observed in the blank group and the sham-operation group; unclear tissue structure, decreased and swelling dopaminergic neurons were observed in the model group; compared with the model group, more neurons were observed and the swelling of cyton was reduced in the moxibustion group. Compared with the sham-operation group, the expression of TH in right mesencephalon substantia nigra was decreased in the model group (P<0.01); compared with the model group, the expression of TH in right mesencephalon substantia nigra was increased in the moxibustion group (P<0.05). Compared with the sham-operation group, the expression of ROS, MDA was increased (P<0.01), the expression of GSH, GSH-Px, Nrf2 and HO-1 was decreased in the model group (P<0.01, P<0.05); compared with the model group, the expression of ROS, MDA was decreased (P<0.05, P<0.01), the expression of GSH, GSH-Px, Nrf2 and HO-1 was increased in the moxibustion group (P<0.05, P<0.01). CONCLUSION: Moxibustion can alleviate oxidative stress injury of nigrostriatal system in rats with Parkinson's disease by activating the Nrf2/ARE pathway, and protect the dopamine neurons.
