[Research progress of optical motion capture technology in shoulder biomechanics].

The shoulder joint is the most flexible joint in the body with the largest range of motion, and the movement pattern is more complex. Accurate capture of three-dimensional motion data of the shoulder joint is crucial for biomechanical evaluation. Optical motion capture systems offer a non-invasive and radiation-free method to capture shoulder joint motion data during complex movements, enabling further biomechanical analysis of the shoulder joint. This review provides a comprehensive overview of optical motion capture technology in the context of shoulder joint movement, including measurement principles, data processing methods to reduce artifacts from skin and soft tissues, factors influencing measurement results, and applications in shoulder joint disorders.

[Progress in arthroscopic surgery for injury of superior labrum anterior posterior of shoulder joint].

Superior labrum anterior posterior (SLAP) injury is a major challenge for orthopedic surgeons, due to the poor healing ability of the injured labrum. Although arthroscopic surgery is the gold standard for the treatment of SLAP injury, there are still disputes about the adaptation of different surgical techniques, the choice of anchors during operation, knotted or knotless anchors, and fixation methods. The authors believe that arthroscopic repair of SLAP lesions is effective for young patients with intact glenoid labrum(<35 years old) or with extensive activity, where single and knotless anchor is preferred. For the older patients(≥35 years old) with degeneration and wear of glenoid labrum, biceps tenodesis is more preferable, and interference screw fixation technique is recommended. As for patients with failed SLAP repair, biceps tenodesis can achieve a high success rate as a revision surgery. By review of the relevant literature in recent years, this paper summarizes the adaptation of different surgical methods of arthroscopic treatment of SLAP injury, intraoperative anchoring techniques, fixation methods and other improved surgical techniques.

[Progress on arthroscopic surgery for massive rotator cuff tears].

The surgical treatment of massive rotator cuff tears is a clinical challenge for orthopaedic surgeons. Moreover, tendon retraction, adhesions and fatty infiltration after rotator cuff tear will further increase the difficulty of surgical repair. Therefore, it has become a hotspot and difficulty to repair massive rotator cuff tears with a better way in current research. In recent years, with the continuous development of arthroscopic techniques, shoulder arthroscopic surgery has become the gold standard for the treatment of massive rotator cuff tears, but the adaptations, effects and combined application of different surgical methods are still controversial. The author believes that arthroscopic debridement of shoulder joint and acromioplasty or tuberoplasty could relieve shoulder pain in the short-term for elderly patients with lower functional requirements;long biceps tenotomy or tenodesis is effective for patients with biceps long head tendon injury; complete repair is still the first line treatment for massive rotator cuff tears, but partial repair is possible for massive rotator cuff tears that could not be completely repaired;patch augmentation technology could bring good results for young patients with high functional requirements;for patients with limited internal and external rotation of the shoulder joint and high functional requirements, tendon transfers surgery is recommended;superior capsular reconstruction is more advantageous for young patients with no obvious glenohumeral arthritis, better deltoid muscle strength and higher functional requirements. In addition, subacromial spacer implantation has become a current research hotspot due to its advantages of small trauma, low cost and relative safety, and its long-term effect still needs to be further confirmed.

[Arthroscopic subscapularis augmentation for the treatment of recurrent dislocation of shoulder with severe glenoid injury].

OBJECTIVE: To investigate the method and clinical effects of the treatment of recurrent shoulder dislocation with severe glenoid injury by arthroscopic subscapularis augmentation. METHODS: From March 2019 to August 2020, 16 patients with recurrent dislocation of shoulder with severe glenoid injury underwent arthroscopic subscapularis augmentation, including 10 males and 6 females, aged from 18 to 50 years old with an average of (29.06±10.54) years old, 4 cases of left shoulder and 12 cases of right shoulder.Visual analogue scale (VAS), American Shoulder and Elbow Surgeons (ASES) score and Rowe score were used to evaluate shoulder function and stability before and after operation. RESULTS: All the 16 patients were followed up from 12 to 29 months, with an average of (18.75±7.26) months. VAS score decreased from 5.25±1.13 before operation to 1.37±0.65 at the final follow-up;ASES score increased from 59.44±9.93 before surgery to 90.88±4.00 at the final follow-up; Rowe score of shoulder increased from 51.56±8.89 before surgery to 92.19±7.06 at the final follow-up, and the differences were statistically significant (P<0.05). No dislocation was observed during follow-up. No clinical complications such as incision infection, vascular and nerve injury occurred in all patients after operation. CONCLUSION: Arthroscopic subscapularis augmentation in the treatment of recurrent dislocation of shoulder with severe glenoid injury is satisfactory. It is an effective treatment method of recurrent dislocation of shoulder joint with severe glenoid injury, and external rotation function in patients with almost unaffected.

[Research progress of graft application in promoting rotator cuff tendon-bone healing].

The incidence of re-tearing after rotator cuff repair is very high. The main reason is that the tendon-osseous junction after the operation is scar healed. In response to this problem, research in recent years has focused on the application of grafts, including cell transplantation, periosteum transplantation, cartilage transplantation, and biosynthetic transplantation. Cell transplantation is mainly a variety of stem cells from different sources. The current research has confirmed that it can achieve better results. The combined application of exosomes and stem cells may be the future development direction. Periosteum transplantation is a promising intervention method, but few clinical applications at present, and there are problems such as limited sources of materials and secondary trauma from the materials. Tissue engineered periostium and artificial bionic periostium may be alternatives to periosteal;cartilage transplantation can promote the regeneration of cartilage at the tendon-osseous junction and facilitate tendon-bone healing. However, there are also limited materials and secondary damage. There is no better solution to this problem. The slow degradation of inorganic composites and the poor effect of single use limit its application; biological derivatives have immunogenicity, poor biomechanics and other issues, there is currently no proper solution; organic synthetic grafts pay more attention to simulating the structure of the physiological tendon-osseointegration zone, and show good results in tendon-bone healing, and have good application prospects. In addition, most of the above-mentioned application research of different grafts stays at the cellular and animal level, and more research is needed in clinical application. This article briefly reviews the application status, advantages, disadvantages and development trends of the above-mentioned different grafts, in order to provide certain guidance for the clinical treatment of rotator cuff tears.

[Comparative study on arthroscopic double posterior medial approach versus open surgery for acute simple posterior cruciate ligament tibial avulsion fracture].

OBJECTIVE: To compare difference in clnical efficacy between arthroscopic double posterior internal approach and incisional surgery for acute simple posterior cruciate ligament tibial avulsion fractures. METHODS: Totally 52 patients with acute simple posterior cruciate ligament tibial avulsion fractures treated from June 2016 to June 2020 were retrospectively analyzed and divided into two groups according to different surgical protocols, 27 patients in arthroscopic group were treated with arthroscopic double posterior internal approach, including 16 males and 11 females, aged from 19 to 52 years old, with an average age of (34.9±9.2) years old;25 patients in open reduction group were treated with posterior medial knee incision, including 14 males and 11 females, aged from 18 to 54 years old , with an average age of(33.7±8.4) years old. Operation time, incision length, intraoperative bleeding, hospitalization days, hospitalization cost, fracture healing, complications, postoperative Lysholm score and IKDC score at 12 months were observed and compared between two groups. RESULTS: All patients in both groups were completed opertaion successfully without vascular or nerve injury, and 52 patients were followed up from 6 to 24 months with an average of (15.0±1.7) months. Operation time and hospitalization cost in arthroscopic group were significantly greater than those in open reduction group(P<0.05);intraoperative bleeding, incision length, and hospitalization days in arthroscopic group were less than those in open reduction group(P<0.05);preoperative Lysholm score in arthroscopic group and open reduction group were 49.1±2.3 and 48.9±1.1 respectively, and improved to 95.9±1.7 and 86.4±1.2 at 12 months after operation respectively(P<0.05);preoperative IKDC scores in arthroscopic group and open reduction group were 47.6±4.1 and 48.1±3.9 respectively, and improved to 96.9±1.5 and 87.1±1.4 at 12 months after operation(P<0.05). CONCLUSION: Arthroscopic double posterior internal approach for acute simple posterior cruciate ligament tibial stop avulsion fracture has satisfactory early results and better efficacy than traditional open surgery, which has advantages of less trauma, faster recovery and easier operation.

[Early efficacy analysis on arthroscopic autologous osteochondral grafting in the treatment of recurrent anterior shoulder dislocation].

OBJECTIVE: To investigate the early efficacy of arthroscopic autologous osteochondral grafting in the treatment of recurrent anterior shoulder dislocation. METHODS: From January 2019 to January 2021, 17 patients with recurrent anterior dislocation of shoulder who underwent arthroscopic autologous osteochondral grafting were selected, including 12 males and 5 females, ranging in age from 17 to 55 years old, with a mean of (32.88±12.33) years old. Rowes rating system for Bankart repair(Rowe), Oxford Shoulder Instability Score (OSIS) and Simple Shoulder Test (SST) were compared before operation, 6 months after operation and at the latest follow-up. OSIS and SST used to evaluate shoulder function were recorded before surgery and at the latest follow-up. The shoulder mobility and intraoperative and postoperative complications were also recorded. RESULTS: All 17 patients were followed up, and the duration ranged from 7 to 25 months, with a mean of (18.4±5.4) months. During the follow-up period, there was no re-dislocation, no vascular or nerve injury. Rowe score increased from 26.2±6.0 before operation to 74.4±4.0 and 82.4±3.1 after 6 months and the latest follow-up. There was significant difference in Rowe score between different time points after operation and before operation (P<0.05). The OSIS increased from 37.0±3.6 before operation to 47.4±2.6 and 52.7±2.6 after 6 months and the latest follow-up. There was significant difference in OSIS between different time points after operation and before operation (P<0.05). The SST score increased from 6.8±0.7 before operation to 9.8±0.8, 11.6±2.6 after 6 months and the latest follow-up. There was significant difference in SST score between different time points after operation and before operation (P<0.05). At the latest follow-up, the lateral external rotation and abduction external rotation activities of the patient were significantly improved compared with those before operation. CONCLUSION: This study provides preliminary evidence that arthroscopic autologous osteochondral grafting can achieve satisfactory early clinical outcomes and stability in patients with recurrent anterior shoulder dislocation with glenoid fracture and defect less than <20%, which is a reliable and effective procedure.

[Progress on the treatment of recurrent anterior dislocation of shoulder with bone defect].

Recurrent anterior dislocation of shoulder with bone defect is one of the common diseases of shoulder joint. How to effectively repair glenoid bone defect and reduce recurrence rate of shoulder dislocation is a problem that clinicians focus on. Bone grafting could stimulate bone, promote bone regeneration and bone remodeling, and restore the normal anatomical structure of glenoid. Among them, Bristow-Latarjet procedure is a classic operation for recurrent shoulder dislocation. Latarjet procedure could repair larger glenoid bone defects, but with higher surgical skills for surgeons;autogenous iliac grafting is the first choice for revision once Latarjet procedure failed;osteochondral grafting (autogenous and allogenous) has certain advantages in reconstructing original articular surface and preventing joint degeneration, but autologous osteochondral grafting may cause secondary injury, while immune rejection is difficult to avoid for allogenous osteochondral grafting. With the improvement of composite materials, and the mechanism of bone regeneration and remodeling, as well as the advantages and disadvantages of bone grafting, tissue engineering technology may become an effective method for the treatment of glenoid bone defect in the future.

[Progress on arthroscopic surgery for recurrent anterior shoulder dislocation].

The surgical treatment of recurrent anterior shoulder dislocation is a difficult problem in the field of sports injury medicine. The main reason focus on dynamic and osseous constraints of shoulder joint could not recover well. At present, arthroscopic surgery is used at home and abroad, and could receive statisfied postoperative effect, but the choice of specific surgical methods is still controversial. According to presence and size of glenoid and humeral skull defects, different treatments should be selected in clinic. The author recommends that no articular glenoid defect or glenoid defect <20%, choose Bankart surgery;articular glenoid defect <20% with Hill-Sachs bone defect <40%, choose Bankart surgery combined with remplissage surgery or ASA surgery;Glenoid defect 20% to 25%, choose "Sling";Glenoid defect 25% to 40%, choose Bristow-Latarjet; Glenoid or Hill-Sachs bone defect>40% or Bristow-Latarjet if the surgical repair fails, bone grafting is used. In addition, if (humeral avulsion of glenohumeral ligaments, HAGL) injury existed, HAGL injury repair should be used. In addition to considering the important factor of bone defects, it is necessary to combine patient's age, exercise level and surgeon's technique to comprehensively select the bestsurgical method.

[Suture technique for rotator cuff tears' repair under arthroscopic].

Shoulder arthroscopic as a conventional method usually is applied to repair rotator cuff tears. In clinical, plenty single-row, double-row and transosseous tunnels suture technique are performed, but the ideal suture technique for rotator cuff repair is not found. Compared with single-row, double-row has better strength in biomechanics property. As the two best suture technique among the single-row, massive cuff stitch and modified Mason-Allen suture have the strongest biomechanics property. Clinical trials indicate that double-row could improve healing rates, but there are no significant difference in clinical outcome functional scores. Transosseous tunnel techniques possess a better bio-mechanic property, which could improve regional micro-environment and induce tendon-bone healing. Transosseous tunnel techniques are better for small to media size rotator cuff tears and osteoporosis patient. The author suggest that optimal rotator cuff repair technique should performed according to skill of performer and individual of patient by analysing bio-mechanic properties, clinical outcome, operative complexity and patient situation. The technique should follow simple opertaion, rapid, less trauma, stable fixation and utility to perform.

Resource recycling sustainability assessment in ready-mixed concrete manufactured on energy consumption and environmental safety in China.

With the rapid development of construction industry, consumption of ready-mixed concrete has increased rapidly in China. As a kind of green building material and waste comprehensive utilization product, industrial solid waste-based ready-mixed concrete have better performance in terms of resource conservation and durability. However, some typical issues are associated with industrial solid waste resource recycling in ready-mixed concrete production process such as energy and material consumption, as well as leaching pollutant emissions. So, a "life cycle assessment" of the particular elements has been carried out, determining the resources consumption of all the processes of the ready-mixed concrete production. Through preparation of several different strength grades of concrete, the embodied energy and resources consumption indicator are quantitative evaluation. In addition, the environmental safety assessment was also proposed. The results show a certain linear relationship of concrete with various strength grade and its resources consumption, the higher strength grade, the more resources consumption potentials in the production of concrete. In this case, the linear correlation coefficient R2=0.98313 between them, and the equivalent coefficient's order of the main resources, is as follows: the first is oil, then natural gas, iron ore, limestone, gypsum, and fly ash, and the last is coal. The more preceding shows more scarcity. Meanwhile, the general leaching of heavy metals Cu, Zn, Ni, Cr, Pb, Cd, and Ba of solid waste-based C20 concrete were also checked out. So, to further ensure the environmental safety, the potential ecological risk method was adopted to assess the heavy metal security and solid waste resource utilization.

[Research advance in surface modification of titanium alloys with chitosan].

Titanium alloy has good biological properties and is commonly used in orthopedics, but its bone integrity and antibacterial properties are poor, so surface modification is needed to make up for its shortcomings. Chitosan has good biocompatibility and film forming ability, and can be used as a carrier to introduce the target drug to the surface of titanium alloy, which can effectively improve the biological properties of titanium alloy materials and increase its application range. In this paper, the related research of chitosan surface modified titanium alloy materials in recent years is summarized. The modification methods of chitosan coating, the improvement of osteogenesisand antibacterial properties of titanium alloy materials are discussed in order to provide guidance for the clinical application of coating modification of titanium alloy materials.

[Progress on effect of osteoporosis on rotator cuff repair].

The rate of rotator cuff injury repair and retear is high in elderly patients due to the combination of different degrees of osteoporosis. To solve this problem, many surgeons try to reduce retear rate of rotator cuff injuries in these patients by increasing the initial fixation strength of anchors and changing local bone conditions. The rapid advances of tissue engineering have made it possible to use growth factors as an aid. However, repair of rotator cuff injury with osteoporosis is still a great challenge for clinical workers. How to better increase anchor fixation strength, improve micro-environment of tendon and bone healing, reduce the rotator cuff retear rate have become the research focus in recent years. The paper reviewed literatures on the relationshipbetween osteoporosis and rotator cuff injury, effect of osteoporosis in rotator cuff tendon healing, methods of reducing osteoporosis on rotator cuff tendon healing, in order to guide clinical treatment, improve operative effect and postoperative satisfaction.

A Benziodoxole-Based Hypervalent Iodine(III) Compound Functioning as a Peptide Coupling Reagent.

1-Benzoyloxy-1,2-benziodoxol-3-(1H)-one (IBA-OBz), a readily available and bench stable benziodoxole-based iodine(III) reagent, can be employed for the synthesis of dipeptides from various standard and sterically hindered amino acids in the presence of (4-MeOC6H4)3P. The combined system of IBA-OBz/(4-MeOC6H4)3P is also successfully applied to the solid-phase peptide synthesis and a pentapeptide leu-enkephalin in unprotected form has been synthesized. Density functional theory calculations reveal that the rate-limiting step is nucleophilic attack of 4-dimethylaminopyridine (DMAP) onto IBA-OBz.

[Risk factors for minimally invasive surfactant administration failure in preterm infants with respiratory distress syndrome].

OBJECTIVE: To identify risk factors for minimally invasive surfactant administration (MISA) failure in the treatment of preterm infants with respiratory distress syndrome (RDS) and the influence of MISA failure on neonatal outcome. METHODS: A retrospective analysis was performed for the clinical data of 148 preterm infants with a gestational age of ≤32 weeks and a clinical diagnosis of RDS, who were admitted to the neonatal intensive care unit of eight tertiary hospitals in Beijing, Tianjin and Hebei Province from July 1, 2017 to December 31, 2018 and were treated with MISA (bovine pulmonary surfactant, PS). According to whether MISA failure (defined as the need for mechanical ventilation within 72 hours after MISA) was observed, the infants were divided into two groups: MISA failure group (n=16) and MISA success (n=132). A logistic regression analysis was used to investigate the risk factors for MISA failure and its influence on neonatal outcome. RESULTS: The MISA failure rate was 10.8% (16/148). The logistic regression analysis showed that a high incidence rate of grade >II RDS before PS administration, low mean arterial pressure and high pulse pressure before administration, a low dose of initial PS administration, and long injection time and operation time were the risk factors for MISA failure (OR=5.983, 1.210, 1.183, 1.055, 1.036, and 1.058 respectively, P<0.05). After the control for the above risk factors, the logistic regression analysis showed that the MISA failure group had a significantly higher incidence rate of bronchopulmonary dysplasia (BPD) (OR=8.537, P<0.05). CONCLUSIONS: A high grade of RDS, a low mean arterial pressure, and a high pulse pressure before administration are independent risk factors for MISA failure, and a low dose of initial PS administration, a long injection time, and a long operation time may increase the risk of MISA failure. MISA failure may increase the incidence rate of BPD in preterm infants.

[Characteristics of R bone age, C bone age, and T bone age in children with different causes of short stature based on Tanner and Whitehouse skeletal age assessment system 2].

OBJECTIVE: To study the characteristics of R bone age, C bone age, and T bone age in children with different causes of short stature based on the Tanner and Whitehouse skeletal age assessment system 2 (TW2), and to provide a reference for the etiological diagnosis of short stature. METHODS: Three hundred and sixty-three children with previously untreated short stature were classified into four groups according to the causes: growth hormone deficiency (GHD; 27 cases), idiopathic short stature (ISS; 280 cases), small for gestational age (SGA; 41 cases), and Turner syndrome (TS; 15 cases). The X-ray films of their left hand-wrist bones were taken to determine the bone age. R bone age, C bone age, and T bone age were assessed by the TW2 method and compared with their chronological age (CA). RESULTS: R bone age, C bone age, and T bone age were over 2 years less than CA in both boys and girls from the GHD group. In the ISS group, R bone age, C bone age, and T bone age were about 1 year less than CA in boys, while there were no significant differences between the bone ages and CA in girls. In the SGA group, there were no significant differences between the bone ages and CA in either boys or girls. In the TS group, R bone age and T bone age were significantly lower than CA, while there was no significant difference between C bone age and CA. CONCLUSIONS: The children with different causes of short stature have different characteristics of R bone age, C bone age, and T bone age assessed by the TW2 method. The assessment of R bone age, C bone age, and T bone age by the TW2 method is helpful for the etiological diagnosis of short stature in children.