Horizontal and Vertical Transport of Uranium in an Arid Weapon-Tested Ecosystem.

Armor-penetrating projectiles and fragments of depleted uranium (DU) have been deposited in soils at weapon-tested sites. Soil samples from these military facilities were analyzed by inductively coupled plasma-optical emission spectroscopy and X-ray diffraction to determine U concentrations and transport across an arid ecosystem. Under arid conditions, both vertical transport driven by evaporation (upward) and leaching (downward) and horizontal transport of U driven by surface runoff in the summer were observed. Upward vertical transport was simulated and confirmed under laboratory-controlled conditions, to be leading to the surface due to capillary action via evaporation during alternating wetting and drying conditions. In the field, the 92.8% of U from DU penetrators and fragments remained in the top 5 cm of soil and decreased to background concentrations in less than 20 cm. In locations prone to high amounts of water runoff, U concentrations were reduced significantly after 20 m from the source due to high surface runoff. Uranium was also transported throughout the ecosystem via plant uptake and wild animal consumption between trophic levels, but with limited accumulation in edible portions in plants and animals.

Distribution and Fractionation of Uranium in Weapon Tested Range Soils.

Uranium is a chemically toxic and radioactive heavy metal. Depleted uranium (DU) is the byproduct of the uranium enrichment process, with a majority of U as uranium-238, and a lower content of the fissile isotope uranium-235 than natural uranium. Uranium-235 is mainly used in nuclear reactors and in the manufacture of nuclear weapons. Exposure is likely to have an impact on humans or the ecosystem where military operations have used DU. Yuma Proving Ground in Arizona, USA has been using depleted uranium ballistics for 36 years. At a contaminated site in the Proving Grounds, soil samples were collected from the flat, open field and lower elevated trenches that typically collect summer runoff. Spatial distribution and fractionation of uranium in the fields were analyzed with total acid digestion and selective sequential dissolution with eight operationally defined solid-phase fractions. In addition to uranium, other trace elements (As, Ba, Co, Cr, Cu, Hg, Mo, Nb, Pd, Pb, V, Zn, Zr) were also assessed. Results show that the trench area in the testing site had a higher accumulation of total U (12.4%) compared to the open-field soil with 279 mg/kg U. Among the eight solid-phase components in the open-field samples, U demonstrated stronger affinities for the amorphous iron-oxide bound, followed by the carbonate bound, and the residual fractions. However, U in the trench area had a stronger binding to the easily reducible oxide bound fraction, followed by the carbonate-bound and amorphous iron-oxide-bound fractions. Among other trace elements, Nb, As, and Zr exhibited the strongest correlations with U distribution among solid-phase components. This study indicates a significant spatial variation of U distribution in the shooting range site. Fe/Mn oxides and carbonate were the major solid-phase components for binding U in the weapon test site.

Functionalization of clay surface for the removal of uranium from water.

A modification method of clay mineral surface was developed to improve its adsorption capacity of uranium. Uranium is a radionuclide with high toxicity and extremely long half-life, which can pollute the environment and endanger human health. This study proposes a new method of activation of clay mineral surface with phosphoric acid for rapid adsorption of uranium from aqueous solution. Compared with other modification methods, this method has the advantages of availability of raw materials, simple operation and good adsorption effects. It provides a cost-effective material to capture uranium ions from water. The essences of this new development are as following: • Activation and changes of clay minerals' surface functionalities with the treatment of phosphoric acid • Controlled modifications of the surface properties of the clay towards the enhancement of U adsorption capacity • Rapid removal of uranium from water.

A simple method for the synthesis of biochar nanodots using hydrothermal reactor.

Biochar is a stable carbon rich by-product synthesized through pyrolysis of plant and animal based biomass, and nano-biochar material has gained increasing attention due to its unique properties for environmental applications. In the present study, a simple cost-effective method for the synthesis of biochar nanoparticles through hydrothermally using agricultural residuals and by-products was developed. Both soybean straw and cattle manure were selected as the feedstock to produce the bulk-biochar. The synthesis procedure involved the digestion of the bulk-biochar with concentrated nitric acid and sulfuric acid in a high pressure condition using a hydrothermal reactor. The suspension was isolated using vacuum filtration with 0.22-µm membrane followed by drying at 65 °C in an oven. Scanning electron microscopy results revealed that both of the biochars had a well-developed porous structure following pyrolysis. Both transmission electron microscopy and the dynamic light scattering results of the hydrothermally treated biochar indicated that the soybean straw and cattle manure biochar nanodots had an average of 5-nm and 4-nm in size, respectively. Overall two raw materials produced 8.5-10% biochar nanodots. The present method presents a simple, quick and cost-effective method for synthesis of biochar nanodots. The method provided a useful tool discovering the applicability biochar nanodots for environmental applications. • Nano-biochar formation from bulk-biochar using hydrothermal reactor • Evaluate nano-biochar's environmental fate and behavior in soil and water • Synthesize multifunctional adsorbent using nano-biochar as primary material.

Laboratory simulation of uranium metal corrosion in different soil moisture regimes.

A novel laboratory simulation system has been developed for the study of the corrosion of uranium metal in soils. Corrosion and transportation of depleted uranium (DU) as the metal undergoes weathering as a buried material within the soil environment. The corrosion of uranium metal in soil was not well understood due to the gas-liquid-solid phase of the soil. This study presents a novel method to investigate the change of uranium species during the process of process of oxidation of metallic uranium in these environments. Compared with other techniques used for the study of environmental corrosion of metals in soils, this method has the advantage of low secondary uranium pollution, no energy consumption, and ease of operation. The simulation system has been used for the following studies: •Simultaneously simulate the corrosion of uranium metal in different soil moisture regimes•Study the influence of biogeochemical factors on the corrosion of uranium metal•Investigate the change of uranium species during oxidation.

A novel laboratory simulation system to uncover the mechanisms of uranium upward transport in a desert landscape.

After depleted uranium (DU) is deposited in the environment, it corrodes producing mobile uranium species. The upward transport mechanism in a desert landscape is associated with the dissolution/precipitation of uranium minerals that vary in composition and solubility in soil pore water. The objective of this study is to develop the laboratory column simulation to investigate the upward transport mechanism with cyclic capillary wetting and drying moisture regimes. Results showed that evaporation driven upward transport occurred even during the first 2 months of wetting-drying regimes. Evaporation driven upward transport may control the U movement in the soil profile in an arid climate. The new system did not generate any uranium-containing wastewater. •Simulates the upward transport process of pollutants with different pollution levels and species.•Simultaneously simulate the transport process of multiple pollutants simultaneously.•Evaluate the influence of biogeochemical factors on pollutant transport such as various cations and anions (Ca, Mg and carbonates) in water.

Designing Highly Crystalline Multifunctional Multicolor Luminescence Nanosystem for Tracking Breast Cancer Heterogeneity.

Breast tumor heterogeneity is responsible for the death of ~ 40,000 women in 2017 in USA. Triple-negative breast cancers (TNBCs) are very aggressive and it is the only breast cancer subgroup still lacking effective therapeutic. As a result, early stage detection of TNBC is vital and it will have huge significant in the clinics. Driven by the need, here we report the design of highly crystalline antibody-conjugated multifunctional multicolor luminescence nanosystem derived from naturally available popular tropical fruits mango and prune, which have capability to track breast cancer heterogeneity via selective separation and accurate identification of TNBC and HER-2 (+) or ER/PR (+) breast cancer cells selectively and simultaneously. A detailed synthesis and characterization of multifunctional multicolor nanosystems from tropical fruits has been reported. Experimental results show that by changing the fruits, multicolor luminescent carbon dots (LCDs) can be developed and is mainly due to the formation of highly crystalline nano dots with different heavy metal doping and also due to the presence of different types of surface functional groups. Experimental data presented show that multifunctional multicolor nanoprobe can be used for highly selective and simultaneous capturing of targeted TNBCs, HER2(+) or ER(+) breast cancer cells and the capture efficiency can be as high as 98%. Reported data indicate that multicolor fluorescence imaging can be used for mapping hetergenous breast cancer cells simultaneously, and it can distinguish targeted TNBCs from non-targeted HER-2 (+) or ER/PR (+) breast cancer. Our finding suggests excellent possibility of designing multicolor nanosystems from natural fruits for tracking cancer heterogeneity in clinics.

Laboratory spiking process of soil with various uranium and other heavy metals.

Laboratory studies using metal spiked soils are challenging due to soil heterogeneity. This work provides an easy, quick, precise, and accurate technique for the preparation of spiked soils for laboratory research. The process described spiking soil with various uranium species and other heavy metals for laboratory scale pilot experiments under various biogeochemical conditions. The procedure involves grinding both dry soil and metal chemicals into the fine powder. The spiked soil mixture was further homogenized through a modified splitting and combining of the sample by diagonal flipping using plastic sheeting. Comparison of measured concentrations with theoretical values were obtained with <20% precision and accuracy. However, tradition spiking method with metal solution often yielded high heterogeneous spiked soils due to strong metal adsorption in soils. Re-drying and re-grinding of soils were required following the spiking in order to homogenize treated soils, generating inhalable particulates. Thus appropriate personal protective equipment and practices are required for the safety concern. The present method with metal salt powder proved a safe, useful, quick, accurate and precise, and homogenized soil spiking method. •ability to prepare spiked soil with multiple elements•prepared soil at any level of loading•the spiked soil was homogenous for controlled studies.