Novel Polyurethane Based, Fully Flexible, High-Performance Piezoresistive Sensor for Real-Time Pressure Monitoring.

Flexible piezoresistive pressure sensors are garnering substantial attention, in line with advancements in biointegrated and wearable electronics. However, a significant portion of piezoresistive pressure sensors suffer from the trade-off between sensitivity and pressure range. Moreover, the current piezoresistive sensors generally rely on a rigid metallic electrode, severely deteriorating their long-term durability. Herein, a fully flexible piezoresistive sensor coupling polyurethane (PU) based electrode and active sensing element is proposed to circumvent the aforementioned problems. By rationally regulating the double-permeable conductive networks within the PU matrix, an elastomeric electrode and sensing element are implemented, respectively. The assembled heterostructured configurations enable impressive sensitivity up to 7.023 kPa-1, broad pressure detection (up to 420 kPa), an ultralow pressure sensing limit (0.1 Pa), and extraordinary operation stability over 80000 cyclic pressings along with fast response/relaxation times (60 ms/80 ms). Additionally, the fully flexible sensor is capable of both real-time detection of physiological signals and mimicking keyboards, implying its viability as a high-performance pressure sensor.

Comparison of staged-stent and stent-assisted coiling technique for ruptured saccular wide-necked intracranial aneurysms: Safety and efficacy based on a propensity score-matched cohort study.

Background: Application of stent-assisted coiling and FD in acute phase of ruptured wide-necked aneurysms is relatively contraindicated due to the potential risk of ischemic and hemorrhagic complications. Scheduled stenting after initial coiling has emerged as an alternative paradigm for ruptured wide-necked aneurysms. The objective of this study is to evaluate the safety and efficacy of a strategy of staged stent-assisted coiling in acutely ruptured saccular wide-necked intracranial aneurysms compared with conventional early stent-assisted coiling strategy via propensity score matching in a high-volume center. Methods: A retrospective review of patients with acutely ruptured saccular wide-necked intracranial aneurysms who underwent staged stent-assisted coiling or conventional stent-assisted coiling from November 2014 to November 2019 was performed. Perioperative procedure-related complications and clinical and angiographic follow-up outcomes were compared. Results: A total of 69 patients with staged stent-assisted coiling and 138 patients with conventional stent-assisted coiling were enrolled after 1:2 propensity score matching. The median interval time between previous coiling and later stenting was 4.0 weeks (range 3.5-7.5 weeks). No rebleeding occurred during the intervals. The rate of immediate complete occlusion was lower with initial coiling before scheduled stenting than with conventional stent-assisted coiling (21.7 vs. 60.9%), whereas comparable results were observed at follow-up (82.5 vs. 72.9%; p = 0.357). The clinical follow-up outcomes, overall procedure-related complications and procedure-related mortality between the two groups demonstrated no significant differences (P = 0.232, P = 0.089, P = 0.537, respectively). Multivariate analysis showed that modified Fisher grades (OR = 2.120, P = 0.041) were independent predictors for overall procedure-related complications and no significant predictors for hemorrhagic and ischemic complications. Conclusions: Staged stent-assisted coiling is a safe and effective treatment strategy for acutely ruptured saccular wide-necked intracranial aneurysms, with comparable complete occlusion rates, recurrence rates at follow-up and overall procedure-related complication rates compared with conventional stent-assisted coiling strategy. Staged stent-assisted coiling could be an alternative treatment option for selected ruptured intracranial aneurysms in the future.

Staged stenting strategy of acutely wide-neck ruptured intracranial aneurysms: A meta-analysis and systematic review.

Objective: In the study, we explored the safety and effectiveness of staged stenting strategy for acutely wide-neck ruptured intracranial aneurysms. Methods: Online databases, including PubMed, EMBASE, the Cochrane database, and Web of Science, were retrospectively and systematically searched. The main observation indicators were the procedure-related complication rate, complete occlusion rate, and favorable clinical outcome. Meta-analysis was performed using a random or fixed effect model based on heterogeneity. Results: A total of 5 studies with 143 patients were included. The hemorrhagic complication rate of the initial coiling and staged stenting was 2.8% (4 of 143) and 0, respectively. The ischemic complication rate of the coiling and supplemental stenting was 3.5% (5 of 143) and 2.9% (4 of 139), respectively. There were no deaths due to procedure-related complications in two stages. The aneurysm complete occlusion rate was 25% (95% CI, 0.13-0.03; I2 = 4.4%; P = 0.168) after initial coiling, 54% (95% CI, 0.63-0.64; I2 = 0%; P = 0.872) after staged stenting, and 74% (95% CI, 0.66-0.81; I2 = 56.4%; P = 0.562) at follow-up, respectively. Favorable clinical outcome rate 74% (95% CI, 0.61-0.86; I2 = 50.5%; P = 0.133) after discharge of initial coiling treatment, and 86% (95% CI, 0.80-0.92; I2 = 0; P = 0.410) after discharge from stenting, and 97% (95% CI, 0.93-1.01; I2 = 43.8%; P = 0.130) at follow-up. Conclusion: Staged stenting treatment of wide-neck RIA with coiling in the acute phase followed by delayed regular stent or flow-diverter stent had high aneurysm occlusion rate, favorable clinical outcome rate and low procedure-related complication rate. A more dedicated and well-designed controlled study is warranted for further evaluation of staged stenting treatment compared to SCA in wide-neck RIA.

A bibliometric analysis of chronic subdural hematoma since the twenty-first century.

BACKGROUND: Chronic subdural hematoma (CSDH) is a common disease that forms between the dura and arachnoid membranes of the brain. With the development of medications and surgery, significant progress has been made in the diagnosis and treatment of CSDH. However, there is no comprehensive analysis available on CSDH-related studies published in the literature. This study aimed to collect and analyze CSDH-related studies published since the twenty-first century using bibliometric analysis and to summarize the current status of research in this field for the sake of providing systematic data for further study of CSDH. METHODS: CSDH-related studies were searched in the Web of Science Core Collection (WoSCC) database using the Medical Subject Heading (MeSH) term 'chronic subdural hematoma'. Data analysis and visualization were performed by R and CiteSpace software. RESULTS: This study retrieved 1424 CSDH-related articles published since the beginning of the twenty-first century. There was a general increase in both the number of published articles and the mean number of citations. The authors, institutions and journals that contributed the most to the field of CSDH were Jianning Zhang, Tianjin Medical University, and world neurosurgery, respectively. The reference co-citation network identified 13 clusters with significant modularity Q scores and silhouette scores (Q = 0.7124, S = 0.8536). The major research categories were (1) evolution of the therapeutic method and (2) the etiology and pathology of CSDH. Keyword analysis revealed that 'middle meningeal artery embolization' was the latest burst keyword. CONCLUSIONS: This study identified the most influential countries, authors, institutions and journals contributing to CSDH research and discussed the hotspots and the latest subjects of CSDH research.

Worldwide productivity and research trends of publications concerning stent application in acutely ruptured intracranial aneurysms: A bibliometric study.

Background: Stenting is a common clinical practice to treat acutely ruptured intracranial aneurysm (RIA). Although multiple studies have demonstrated its long-term safety and effectiveness, there is currently a lack of bibliometric analysis on stent application in acutely RIA. This study sought to summarize the current status of research in this field and lay a foundation for further study. Materials and methods: Related publications were searched in the Web of Science Core Collection (WoSCC) database. Data analysis and visualization were performed by R and CiteSpace software. Results: A total of 275 publications published in English from 1997 to 2022 were included in this study. The growth of publications slowed down. The reference co-citation network identified 13 clusters with a significant network (Q = 0.7692) and convincing clustering (S = 0.9082). The research focus was acutely RIA and the application of stents during interventional procedures. The main trends of research were: (1) development of materials, and (2) safety of stent application in acutely RIA. The United States contributed the most articles, and Jianmin Liu was the most prolific author. Mayo Clinic was the leading institution in this field. Most articles were published in Interventional Neuroradiology. Conclusions: This study analyzed the research trends, hotspots and frontiers of stent application in acutely RIA. It is our hope that the results obtained could provide useful information to researchers to get a clearer picture about their future research directions in this field.

Interfacial Electronic Effects in Co@N-Doped Carbon Shells Heterojunction Catalyst for Semi-Hydrogenation of Phenylacetylene.

Metal-supported catalyst with high activity and relatively simple preparation method is given priority to industrial production. In this work, this study reported an easily accessible synthesis strategy to prepare Mott-Schottky-type N-doped carbon encapsulated metallic Co (Co@Np+gC) catalyst by high-temperature pyrolysis method in which carbon nitride (g-C3N4) and dopamine were used as support and nitrogen source. The prepared Co@Np+gC presented a Mott-Schottky effect; that is, a strong electronic interaction of metallic Co and N-doped carbon shell was constructed to lead to the generation of Mott-Schottky contact. The metallic Co, due to high work function as compared to that of N-doped carbon, transferred electrons to the N-doped outer shell, forming a new contact interface. In this interface area, the positive and negative charges were redistributed, and the catalytic hydrogenation mainly occurred in the area of active charges. The Co@Np+gC catalyst showed excellent catalytic activity in the hydrogenation of phenylacetylene to styrene, and the selectivity of styrene reached 82.4%, much higher than those of reference catalysts. The reason for the promoted semi-hydrogenation of phenylacetylene was attributed to the electron transfer of metallic Co, as it was caused by N doping on carbon.

Collagen/heparin sulfate scaffolds fabricated by a 3D bioprinter improved mechanical properties and neurological function after spinal cord injury in rats.

Effective treatments promoting axonal regeneration and functional recovery for spinal cord injury (SCI) are still in the early stages of development. Most approaches have been focused on providing supportive substrates for guiding neurons and overcoming the physical and chemical barriers to healing that arise after SCI. Although collagen has become a promising natural substrate with good compatibility, its low mechanical properties restrict its potential applications. The mechanical properties mainly rely on the composition and pore structure of scaffolds. For the composition of a scaffold, we used heparin sulfate to react with collagen by crosslinking. For the structure, we adopted a three-dimensional (3D) printing technology to fabricate a scaffold with a uniform pore distributions. We observed that the internal structure of the scaffold printed with a 3D bioprinter was regular and porous. We also found that both the compression modulus and strengths of the scaffold were significantly enhanced by the collagen/heparin sulfate composition compared to a collagen scaffold. Meanwhile, the collagen/heparin sulfate scaffold presented good biocompatibility when it was co-cultured with neural stem cells in vitro. We also demonstrated that heparin sulfate modification significantly improved bFGF immobilization and absorption to the collagen by examining the release kinetics of bFGF from scaffolds. Two months after implantating the scaffold into transection lesions in T10 of the spinal cord in rats, the collagen/heparin sulfate group demonstrated significant recovery of locomotor function and according to electrophysiological examinations. Parallel to functional recovery, collagen/heparin sulfate treatment further ameliorated the pathological process and markedly increased the number of neurofilament (NF) positive cells compared to collagen treatment alone. These data suggested that a collagen/heparin sulfate scaffold fabricated by a 3D bioprinter could enhance the mechanical properties of collagen and provide continuous guidance channels for axons, which would improve the neurological function after SCI. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1324-1332, 2017.

[PREPARATION OF BIONIC COLLAGEN-HEPARIN SULFATE SPINAL CORD SCAFFOLD WITH THREE-DIMENSIONAL PRINT TECHNOLOGY].

OBJECTIVE: To prepare bionic spinal cord scaffold of collagen-heparin sulfate by three-dimensional (3-D) printing, and provide a cell carrier for tissue engineering in the treatment of spinal cord injury. METHODS: Collagen- heparin sulfate hydrogel was prepared firstly, and 3-D printer was used to make bionic spinal cord scaffold. The structure was observed to measure its porosity. The scaffold was immersed in simulated body fluid to observe the quality change. The neural stem cells (NSCs) were isolated from fetal rat brain cortex of 14 days pregnant Sprague-Dawley rats and cultured. The experiment was divided into 2 groups: in group A, the scaffold was co-cultured with rat NSCs for 7 days to observe cell adhesion and morphological changes; in group B, the NSCs were cultured in 24 wells culture plate precoating with poly lysine. MTT assay was used to detect the cell viability, and immunofluorescence staining was used to identify the differentiation of NSCs. RESULTS: Bionic spinal cord scaffold was fabricated by 3-D printer successfully. Scanning electron microscope (SEM) observation revealed the micro porous structure with parallel and longitudinal arrangements and with the porosity of 90.25% ± 2.15%. In vitro, the value of pH was not changed obviously. After 8 weeks, the scaffold was completely degraded, and it met the requirements of tissue engineering scaffolds. MTT results showed that there was no significant difference in absorbence (A) value between 2 groups at 1, 3, and 7 days after culture (P > 0.05). There were a lot of NSCs with reticular nerve fiber under light microscope in 2 groups; the cells adhered to the scaffold, and axons growth and neurosphere formation were observed in group A under SEM at 7 days after culture. The immunofluorescence staining observation showed that NSCs could differentiated into neurons and glial cells in 2 groups; the differentiation rate was 29.60% ± 2.68% in group A and was 10.90% ± 2.13% in group B, showing significant difference (t = 17.30, P = 0.01). CONCLUSION: The collagen-heparin sulfate scaffold by 3-D-printed has good biocompatibility and biological properties. It can promote the proliferation and differentiation of NSCs, and can used as a neural tissue engineered scaffold with great value of research and application.