ABSTRACT
To obtain a rapid processible LED encapsulant that leads to high and stable light extraction efficiency (LEE), UV curable ZrO2/phenyl-siloxane nano-composite (ZSC) double-layer encapsulants were prepared and optimized. The highly crystalline ZrO2 nanoparticles with a diameter of â¼14 nm were synthesized through a modified hydrothermal method at mild conditions, and a UV curable methacryl-diphenyl-polysiloxane (MDPS) with a refractive index (RI) of 1.54 (at 633 nm) was synthesized from self-condensation of diphenylsilanediol and an end-capping reaction. High refractive indexes (RIs) from 1.54-1.61 have been obtained for ZSC composites by adding 0-20 wt% ZrO2. Before and after sulfur vapor erosion, the double-layer encapsulated sample (M-10/M) showed 11.2% and 64.8% higher LEE respectively than that of Dow Corning OE-7662. Meanwhile, the variation of LED light color temperature (T c) was less than 1%. The effect of the ZrO2 nanoparticle content on LEE of double-layer and single-layer encapsulation were compared and discussed based on Fresnel loss and Rayleigh scattering theories. The double-layered UV curing processing took only 1/6 of the time needed for common thermal curing.
ABSTRACT
A reactive and purely inorganic high Mw perfect ladder polyhydrosilsesquioxane (H-LPSQ) was first prepared under the direction of two imperative supramolecular architectures: ladder superstructure (H-LS) and donor-acceptor complex (DAC).
ABSTRACT
Molecular arrangement and transition in the domain boundary of a chiral two-dimensional assembly is clearly revealed by high-resolution STM images on an HOPG surface and a linear dislocation formed by molecular trimers and located at opposite chiral domains is found to directly reverse the chirality on DTCD self-assembly.
Subject(s)
Microscopy, Scanning Tunneling/methods , Stereoisomerism , Benzene Derivatives/chemistry , Graphite/chemistry , Nanostructures/chemistry , Nanotechnology/methodsABSTRACT
A template synthesis of the soluble, high molecular weight (Mw), and perfect p-phenylenediimino (p-PDA)-bridged ladderlike polyphenylsiloxane (PLPS) is reported. First, N,N'-bis(phenyldichlorosilyl)-p-PDA monomers were self-assembled into a perfect ladder superstructure (LS) by concerted interaction of aromatic pi-pi stacking and hydrogen bonding. Then the LS underwent a novel stoichiometric hydrolysis/dehydrochlorination-condensation reaction instead of the usual hydrolysis/dehydration-condensation reaction, leading to the PLPS. The perfect ladder structures of both the PLPS and, in particular, the unstable supramolecular LS were confirmed as follows. 1) There are two Bragg peaks in solid and/or solution X-ray diffraction (XRD) spectra representing the ladder width (w) and ladder thickness (t); these peaks were consistent with those calculated by molecular simulation. 2) Both the PLPS and LS have extremely sharp absorption peaks with small half-peak widths (Delta(1/2) < 0.3 ppm) in 29Si NMR spectra, suggesting the presence of the perfect ladder structure for PLPS and LS. 3) Moreover, no noticeable absorption peaks for the Si-OH and NH2 groups were observed in FT-IR and 29Si NMR spectra, indicating that the Si-N bond of the [triple bond]Si-NH-C6H4-NH-Si[triple bond] ladder rung of PLPS and LS is not cleaved. 4) Both PLPS and LS show similar emission peaks (in fluorescence spectroscopy) attributed to the excimer formed by face-to face pi-pi stacking of phenyl groups along the ladder chain rather than a branched direction. 5) Differential scanning calorimetry (DSC) measurements indicate a high glass temperature (Tg = 176.4 degrees C) for PLPS. As circumstantial evidence, this result further indicates very high stiffness of PLPSs ladder backbone as compared with flexible single-chain polyphenylmethylsiloxane with a low Tg = -69.4 degrees C.
ABSTRACT
A luminescent supramolecular chiral Au16 ring with 4.822 nm perimeter that self-assembled from a tetrameric array of achiral Au2 units is described. Intra- and intermolecular Au...Au interactions play an important role in directing its chiral self-assembly.
ABSTRACT
A novel soluble aryl amide-bridged ladderlike polymethylsiloxane (A-LPMS) was synthesized by stepwise coupling polymerization on the basis of amido H-bonding self-assembling template from monomer N,N'-bis(3-methyldiethoxylsilylpropyl)-[4,4'-oxybis(benzyl amide)]. The monomer was prepared in a high yield by the hydrosilylation reaction of template agent N,N'-diallyl-[4,4'-oxybis(benzyl amide)] with methyldiethoxysilane in the presence of dicyclopentadienylplatinum dichloride (Cp(2)PtCl(2)) as catalyst. A variety of techniques including (1)H NMR, (13)C NMR, (29)Si NMR, FTIR, XRD, DSC, and, especially, static and dynamic light scattering and viscosimetry were combined to confirm the presence of the ordered ladderlike structure of polymer A-LPMS.
