On-Demand 3D Spatial Distribution of Magnetic Permeability Based on Fe3 O4 Nanoparticle Liquid Toward Micro-Cavity Detectors.

The change of 3D spatial distribution of magnetic permeability can lead to the generation of introduced electrical signals. However, present studies can only achieve rough regulation by simple shape deformation of magnetic elastomers such as compression, bending, or stretching. Accurate control of the 3D spatial distribution of magnetic permeability is still an open question. In this study, an on-demand 3D spatial distribution of magnetic permeability by controlled flowing of Fe3 O4 nanoparticle liquid (FNL) is demonstrated. The flowing routes of FNL are tuned by a 3D-printed cage with pre-designed hollow structure, thus changing the 3D spatial distribution of magnetic permeability. Then, eight symmetrically distributed coils under cage are used to receive characteristic induction voltage signals. Maxwell numerical simulation reveals the working mechanism of signal generation. Notably, those eight coils can detect FNL flowing status in eight directions, allowing recognition of up to 255 different FNL flowing combinations. By introducing machine learning, the micro-cavity detector based on FNL can distinguish nine kinds of micro-cavity structures with an accuracy of 98.77%. This work provides a new strategy for the adjustment of the 3D spatial distribution of the magnetic permeability and expands the application of FNL in the field of space exploration.

Removal of Heavy Metal Ions from Aqueous Solution Using Biotransformed Lignite.

Heavy metal pollution caused by industrial wastewater such as mining and metallurgical wastewater is a major global concern. Therefore, this study used modified lignite as a low-cost adsorbent for heavy metal ions. Pingzhuang lignite was dissolved and modified using Fusarium lignite B3 to prepare a biotransformed-lignite adsorbent (BLA). The O, H, and N contents of the BLA increased after transformation, and the specific surface area increased from 1.81 to 5.66 m2·g-1. Various adsorption properties were investigated using an aqueous solution of Cu(Ⅱ). The kinetic and isothermal data were well-fitted by pseudo-second-order and Langmuir models, respectively. The Langmuir model showed that the theoretical Cu(II) adsorption capacity was 71.47 mg·g-1. Moreover, large particles and a neutral pH were favorable for the adsorption of heavy metal ions. The adsorption capacities of raw lignite and BLA were compared for various ions. Microbial transformation greatly improved the adsorption capacity, and the BLA had good adsorption and passivation effects with Cu(II), Mn(II), Cd(II), and Hg(II). Investigation of the structural properties showed that the porosity and specific surface area increased after biotransformation, and there were more active groups such as -COOH, Ar-OH, and R-OH, which were involved in the adsorption performance.

Large-Scale, Abrasion-Resistant, and Solvent-Free Superhydrophobic Objects Fabricated by a Selective Laser Sintering 3D Printing Strategy.

Manufacturing abrasion-resistant superhydrophobic matters is challenging due to the fragile feature of the introduced micro-/nanoscale surface roughness. Besides the long-term durability, large scale at meter level, and 3D complex structures are of great importance for the superhydrophobic objects used across diverse industries. Here it is shown that abrasion-resistant, half-a-meter scaled superhydrophobic objects can be one-step realized by the selective laser sintering (SLS) 3D printing technology using hydrophobic-fumed-silica (HFS)/polymer composite grains. The HFS grains serve as the hydrophobic guests while the sintered polymeric network provides the mechanical strength, leading to low-adhesion, intrinsic superhydrophobic objects with desired 3D structures. It is found that as-printed structures remained anti-wetting capabilities even after undergoing different abrasion tests, including knife cutting test, rude file grinding test, 1000 cycles of sandpaper friction test, tape test and quicksand impacting test, illustrating their abrasion-resistant superhydrophobic stability. This strategy is applied to manufacture a shell of the unmanned aerial vehicle and an abrasion-resistant superhydrophobic shoe, showing the industrial customization of large-scale superhydrophobic objects. The findings thus provide insight for designing intrinsic superhydrophobic objects via the SLS 3D printing strategy that might find use in drag-reduce, anti-fouling, or other industrial fields in harsh operating environments.

Highly-Tunable Intrinsic Room-Temperature Ferromagnetism in 2D van der Waals Semiconductor Crx Ga1- x Te.

The combination of semiconductivity and tunable ferromagnetism is pivotal for electrical control of ferromagnetism and next-generation low-power spintronic devices. However, Curie temperatures (TC ) for most traditional intrinsic ferromagnetic semiconductors (≤200 K) and recently discovered two-dimensional (2D) ones (<70 K) are far below room temperature. 2D van der Waals (vdW) semiconductors with intrinsic room-temperature ferromagnetism remain elusive considering the unfavored 2D long-range ferromagnetic order indicated by Mermin-Wagner theorem. Here, vdW semiconductor Crx Ga1- x Te crystals exhibiting highly tunable above-room-temperature ferromagnetism with bandgap 1.62-1.66 eV are reported. The saturation magnetic moment (Msat ) of Crx Ga1- x Te crystals can be effectively regulated up to ≈5.4 times by tuning Cr content and ≈75.9 times by changing the thickness. vdW Crx Ga1- x Te ultrathin semiconductor crystals show robust room-temperature ferromagnetism with the 2D quantum confinement effect, enabling TC 314.9-329 K for nanosheets, record-high for intrinsic vdW 2D ferromagnetic semiconductors. This work opens an avenue to room-temperature 2D vdW ferromagnetic semiconductor for 2D electronic and spintronic devices.

Two-dimensional magnetic atomic crystals.

Two-dimensional (2D) magnetic crystals show many fascinating physical properties and have potential device applications in many fields. In this paper, the preparation, physical properties and device applications of 2D magnetic atomic crystals are reviewed. First, three preparation methods are presented, including chemical vapor deposition (CVD) molecular beam epitaxy (MBE) and single-crystal exfoliation. Second, physical properties of 2D magnetic atomic crystals, including ferromagnetism, antiferromagnetism, magnetic regulation and anomalous Hall effect are presented. Third, the application of 2D magnetic atomic crystals in heterojunctions reluctance and other aspects are briefly introduced. Finally, the future development direction and possible challenges of 2D magnetic atomic crystals are briefly addressed.

Minor dammarane saponins from the hongshen extract of Shenmai injection.

A new dammarane-type triterpenoid saponin, (20R)-ginsenoside ST(2) (1), along with five known saponins was isolated from the hongshen extract of Shenmai injection. The structure of 1 was elucidated to be (20R)-dammar-23(E)-ene-3ß,6α,12ß,20,25-pentol 6-O-ß-D-glucopyranoside by means of spectroscopic methods.

[Studies on chemical constituents of Patrinia villosa].

OBJECTIVE: To inverstigate the chemical constituents of Patrinia villosa. METHOD: Under the direction of tetrazolium salt (MTf) assay, the chemical constituents were isolated by silica gel column chromatography and identified by physicochemical properties and spectral analysis (MS, FAB-MS, 1H NMR, 13C NMR). RESULT: Five compounds were isolated from petroleum ether and ethyl acetate extract and identified as: ursolic acid(I), beta-sitosterol (II), patrinalloside(III), kaempferol-3-O-beta-D-glucopyranoside(IV), and kaempferol-3-O-beta-D-glucopyranoside-7-O-alpha-L-rhamnoside(V). CONCLUSION: Compounds I and V were obtained from the plant of genus Patrinia for the first time. Ursolic acid showed powerful anticancer activity through tetrazolium salt(MTT) assay, and its IC50 was 15.0 microg/ml.