Variations in serum low-density lipoprotein and sST2 among heart failure patients with different ejection fraction groups and their clinical significance.

OBJECTIVE: This study aimed to examine the changes in serum Low Density Lipoprotein Cholesterol (LDL-C) and Soluble Growth Stimulating Expressed Gene 2 Protein (sST2) among Heart Failure (HF) patients with varying ejection fractions and their clinical significance, providing a reference for the clinical assessment of HF severity. METHODS: A total of 238 HF patients treated in our hospital's cardiology department from September 2019 to December 2021 were selected; 68 patients hospitalized in the same period were selected as the control group. General information, LDL-C and echocardiographic results of admitted patients were collected. According to LVEF results and the latest European Society of Cardiology standards in 2021, HF patients were categorized into those with HFpEF (n = 95), HFmrEF (n = 60), and HFrEF (n = 83). Meanwhile, venous blood was collected to determine sST2 and NT-proBNP to compare and analyze the changes and clinical significance of sST2 and LDL-C across the groups. RESULTS: Compared to the control group, the HF group showed significant differences in age, gender, heart rate, smoking history, history of atrial fibrillation, history of diabetes, LVEDD, LVEF, sST2, and NT-proBNP levels (P < .05), but not in LDL-C levels. Significant differences (P < .05) were also found among the 3 HF groups in terms of age, gender, history of atrial fibrillation, LVEDD, LVEF, LDL-C, sST2, and NT-proBNP levels, with an increase in LVEDD, LDL-C, sST2, and NT-proBNP values as the ejection fraction decreased. ROC curve analysis indicated that the area under the curve (AUC) for sST2 in diagnosing HF was 0.915 (P < .05), with an optimal cutoff value of 23.71 ng/mL, a sensitivity of 76.5%, and a specificity of 95.6%; LDL-C was not a significant diagnostic marker for HF (P > .05). Coronary artery disease, NT-proBNP, and sST2 were identified as risk factors for HF. With each unit increase in coronary artery disease, the risk of HF increased by 36.3%; for NT-proBNP, the risk increased by 1.3% per unit; and for sST2, it increased by 18.3% per unit. CONCLUSION: As the ejection fraction decreases in HF patients, serum sST2 and LDL-C values progressively increase, which is clinically significant for predicting the severity of HF. sST2 is an independent risk factor for HF and can enhance the diagnostic accuracy for HF.

Relationship between four insulin resistance surrogates and left ventricular hypertrophy among hypertensive adults: a case-control study.

Background: Hypertension-induced left ventricular hypertrophy (LVH) is intricately linked to insulin resistance (IR). This research aimed to elucidate the relationship of advanced indices, namely the triglyceride-glucose (TyG) index, the TyG adjusted for body mass index (TyG-BMI), the triglycerides-to-high-density lipoprotein cholesterol ratio (TG/HDL-c), and the metabolic score for IR (METS-IR), with LVH in hypertensive cohorts. Methods: This analytical case-control investigation encompassed 800 individuals aged 18 or above from the Cardiology Department of the Second Affiliated Hospital of Baotou Medical College over a span from January 2021 to April 2022. Data extraction was conducted from inpatient records. The nexus between the four metrics and LVH susceptibility was ascertained via logistic regression models. Furthermore, the receiver operating characteristic (ROC) curve's area (AUC) shed light on the discriminative capacities of the distinct IR indicators for LVH, considering other concomitant risk variables. Results: Post multifaceted covariate adjustments, the fourth quartile figures for TyG-BMI emerged as the most starkly significant (OR: 5.211, 95% CI: 2.861-9.492), succeeded by METS-IR (OR: 4.877, 95% CI: 2.693-8.835). In juxtaposition with other IR-derived indices (TyG and TG/HDL-c), TyG-BMI manifested the paramount AUC (AUC: 0.657; 95% CI: 0.606-0.708). Concurrently, METS-IR exhibited commendable predictive efficacy for LVH (AUC: 0.646; 95% CI: 0.595-0.697). Conclusion: TyG-BMI and METS-IR displayed superior discriminative capabilities for LVH, underscoring their potential as supplementary indicators in gauging LVH peril in clinical settings and prospective epidemiological research.

Robust Antibacterial Activity of Xanthan-Gum-Stabilized and Patterned CeO2-x-TiO2 Antifog Films.

Increased occurrence of antimicrobial resistance leads to a huge burden on patients, the healthcare system, and society worldwide. Developing antimicrobial materials through doping rare-earth elements is a new strategy to overcome this challenge. To this end, we design antibacterial films containing CeO2-x-TiO2, xanthan gum, poly(acrylic acid), and hyaluronic acid. CeO2-x-TiO2 inks are additionally integrated into a hexagonal grid for prominent transparency. Such design yields not only an antibacterial efficacy of ∼100% toward Staphylococcus aureus and Escherichia coli but also excellent antifog performance for 72 h in a 100% humidity atmosphere. Moreover, FluidFM is employed to understand the interaction in-depth between bacteria and materials. We further reveal that reactive oxygen species (ROS) are crucial for the bactericidal activity of E. coli through fluorescent spectroscopic analysis and SEM imaging. We meanwhile confirm that Ce3+ ions are involved in the stripping phosphate groups, damaging the cell membrane of S. aureus. Therefore, the hexagonal mesh and xanthan-gum cross-linking chains act as a reservoir for ROS and Ce3+ ions, realizing a long-lasting antibacterial function. We hence develop an antibacterial and antifog dual-functional material that has the potential for a broad application in display devices, medical devices, food packaging, and wearable electronics.

Receptor antibody time-resolved A2 phospholipase bead immunochromatography and its application in idiopathic membranous nephropathy.

OBJECTIVE: To detect phospholipase A2 receptor (PLA2R) antibody by established time-resolved fluorescent bead immunochromatographic assay. METHODS: The reaction time of coupling, pH of the reaction, and coupling ratio of the label to PLA2R were determined. The EDC method was used to covalently couple PLA2R to time-resolved fluorescent beads, which were sprayed onto a bonding pad. PLA2R and rabbit anti-PLA2R antibody sprayed onto a nitrocellulose membrane were used as detection and quality control lines, respectively. Immunochromatographic test strips were prepared to enable rapid detection of PLA2R antibodies. Various technical indicators were evaluated, and the correlation among this method, enzyme-linked immunosorbent assay (ELISA), and serum analysis was examined. RESULTS: The pH suitable for labeling was 6.5. The optimal mass ratio of PLA2R protein to fluorescent beads was 0.08:1, and the reaction time of coupling was at least 1.5 hours. The appropriate spray film size of the coupled fluorescent bead was 5 µL/cm, and the appropriate staining concentration of the test line was 0.28 mg/mL. Further, 80 µL of sample was required for the test, and the result was obtained in only 15 minutes. The measurable range of this method was 5-1500 RU/mL. Intra- and inter-assay coefficients of variation were 7.61% and 11.07%, respectively, with an average recovery rate of 93.77%. The method showed a good correlation with ELISA, with a correlation coefficient of 0.936. CONCLUSIONS: This method could better meet the clinical demand for idiopathic membranous nephropathy (IMN) detection.

Ibuprofen-mediated potential inhibition of biofilm development and quorum sensing in Pseudomonas aeruginosa.

AIMS: Pseudomonas aeruginosa is one of the leading causes of opportunistic and hospital-acquired infections worldwide, which is frequently linked with clinical treatment difficulties. Ibuprofen, a widely used non-steroidal anti-inflammatory drug, has been previously reported to exert antimicrobial activity with the specific mechanism. We hypothesized that inhibition of P. aeruginosa with ibuprofen is involved in the quorum sensing (QS) systems. MAIN METHODS: CFU was utilized to assessed the growth condition of P. aeruginosa. Crystal violent staining and acridine orange staining was used to evaluate the biofilm formation and adherence activity. The detection of QS virulence factors such as pyocyanin, elastase, protease, and rhamnolipids were applied to investigation the anti-QS activity of ibuprofen against P. aeruginosa. The production of 3-oxo-C12-HSL and C4-HSL was confirmed by liquid chromatography/mass spectrometry analysis. qRT-PCR was used to identify the QS-related gene expression. Furthermore, we explored the binding effects between ibuprofen and QS-associated proteins with molecular docking. KEY FINDINGS: Ibuprofen inhibits P. aeruginosa biofilm formation and adherence activity. And the inhibitory effects of ibuprofen on C4-HSL levels were concentration-dependent (p < 0.05), while it has no effect on 3-oxo-C12-HSL. Moreover, ibuprofen attenuates the production of virulence factors in P. aeruginosa (p < 0.05). In addition, the genes of QS system were decreased after the ibuprofen treatment (p < 0.05). Of note, ibuprofen was binding with LuxR, LasR, LasI, and RhlR at high binding scores. SIGNIFICANCE: The antibiofilm and anti-QS activity of ibuprofen suggest that it can be a candidate drug for the treatment of clinical infections with P. aeruginosa.

Multifunctional voltage source inverter for renewable energy integration and power quality conditioning.

In order to utilize the energy from the renewable energy sources, power conversion system is necessary, in which the voltage source inverter (VSI) is usually the last stage for injecting power to the grid. It is an economical solution to add the function of power quality conditioning to the grid-connected VSI in the low-voltage distribution system. Two multifunctional VSIs are studied in this paper, that is, inductive-coupling VSI and capacitive-coupling VSI, which are named after the fundamental frequency impedance of their coupling branch. The operation voltages of the two VSIs are compared when they are used for renewable energy integration and power quality conditioning simultaneously. The operation voltage of the capacitive-coupling VSI can be set much lower than that of the inductive-coupling VSI when reactive power is for compensating inductive loads. Since a large portion of the loads in the distribution system are inductive, the capacitive-coupling VSI is further studied. The design and control method of the multifunctional capacitive-coupling VSI are proposed in this paper. Simulation and experimental results are provided to show its validity.